FLOS TACCIA LED F6602004 User manual

REV. 1
DATE 07/07/2021
1
TACCIA LED
Designed by Achille & Pier Giacomo Castiglioni, 1962
F6602004
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. F6510000
–Glass diffuser with reflector
02. RF00780
–White reflector
03. F6608004
–Anodized silver base
04. RF6608100
–Jack plug with cable and push dimmer
05. RF3320400
–Power supply unit with plug kit
TACCIA LED
F6602004
REV. 1
DATE 07/07/2021

EN
3
F6510000
GLASS DIFFUSER WITH REFLECTOR
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
TACCIA LED F6602004
REV. 1
DATE 07/07/2021

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Position the diffuser (B) and the reflector (A) on the base (C).
Fig.1
B
C
F6510000
GLASS DIFFUSER WITH REFLECTOR
TACCIA LED F6602004
REV. 1
DATE 07/07/2021

EN
5
RF00780
WHITE REFLECTOR
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
REV. 1
DATE 07/07/2021
TACCIA LED F6602004

6
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Position the reflector (C) on the diffuser (B).
Fig.1
C
B
D
TACCIA LED F6602004
REV. 1
DATE 07/07/2021
RF00780
WHITE REFLECTOR

EN
7
F6608004
ANODIZED SILVER BASE
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
TACCIA LED F6602004
REV. 1
DATE 07/07/2021

8
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Position the diffuser (B) and the reflector (A) on the base (C).
Fig.1
A
B
C
F6608004
ANODIZED SILVER BASE
TACCIA LED F6602004
REV. 1
DATE 07/07/2021

EN
9
RF6608100
JACK PLUG WITH CABLE AND PUSH DIMMER
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
TACCIA LED F6602004
REV. 1
DATE 07/07/2021

10
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Unfasten the 2 screws (A) from underneath the
dimmer and remove the dimmer cover (B).
Fig.1
Fig.2
A
B
RF6608100
JACK PLUG WITH CABLE AND PUSH DIMMER
TACCIA LED F6602004
REV. 1
DATE 07/07/2021

11
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Unfasten the 2 screws (C) of the cable clamp
(D) and disconnect the wires from the terminal
box (F) through a tiny flat headed screw
driver.
Fig.3
Fig.4
CD
F
RF6608100
JACK PLUG WITH CABLE AND PUSH DIMMER
TACCIA LED F6602004
REV. 1
DATE 07/07/2021

12
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Connect the electrical wires to the terminal (F)
respecting the polarities of the dimmer.
Position the cable clamp (D) and fasten back
the screws (C).
Close the dimmer by positioning the cover (B)
and fastening the 2 screws (A)
Fig.5
Fig.6
FF
FF
RF6608100
JACK PLUG WITH CABLE AND PUSH DIMMER
TACCIA LED F6602004
REV. 1
DATE 07/07/2021
Black/Nero (DC
IN-)
Black/Nero (DC IN-)
Blue/Blu (DIM-)
White/Bianco
(DIM+)
Red/Rosso (DC
IN+)
Red/Rosso (DC
IN+)

EN
13
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF3320400
POWER SUPPLY UNIT WITH PLUG KIT
TACCIA LED F6602004
REV. 1
DATE 07/07/2021
Noctambule
All Floor
Versions
p.15
Captain
Flint
p.05
Sawaru
p.03
Superloon
p.13
Taccia
Led
p.13
Arco Led
p.03
Bellhop
F
p.11
Coordinates F
p.14

14
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
When installing and whenever acting on the appliance, ensure that the
power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a
qualified electrician.
Insert the plug into the power unit. By using the guides, snap the plug
inside its apposite slot (use the correct type of plug for the country in
which the device must be installed).
Fig.1
RF3320400
POWER SUPPLY UNIT WITH PLUG KIT
TACCIA LED F6602004
REV. 1
DATE 07/07/2021