FLOS KELVIN LED F User manual

8
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
F3322009A
KELVIN LED F WHITE BASE
KELVIN LED F F3305009
REV. 1
DATE 21/07/2021

9
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
Insert the device support (A) into the pin (B) of the base and fasten the safety
pin screw (H) by utilizing an Allen key hex 1,5mm.
REMARK! Be careful whilst tightening the safety pin screw to not
scratch the base of the device.
B
A
KELVIN LED F F3305009
REV. 1
DATE 21/07/2021
H
F3322009A
KELVIN LED F WHITE BASE