FLOS IC C/W1 User manual

REV. 1
DATE 29/06/2021
1
IC C/W1
Designed by Michael Anastassiades, 2014
F3178057
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
IC C/CW1
F3178057
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
REV. 1
DATE 29/06/2021



EN
3
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. F3136057 –Glass diffuser 1 assembly for chrome version
02. RF3160100 –Kit with screws and Allen key
REV. 1
DATE 29/06/2021


IC C/CW1
F3178057

EN
4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
F3136057
GLASS DIFFUSER 1 ASSEMBLY FOR CHROME VERSION
IC C/W1 F3178057
REV. 1
DATE 29/06/2021

5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Assemble the glass diffuser (E) by fastening it delicately to the lamp body’s
ferrule (F).
E
Fig.1
F
REV. 1
DATE 29/06/2021
F3136057
GLASS DIFFUSER 1 ASSEMBLY FOR CHROME VERSION
IC C/W1 F3178057

EN
6
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF3160100
KIT WITH SCREWS AND ALLEN KEY
REV. 1
DATE 29/06/2021
IC C/W1 F3178057

7
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Before proceeding in installing the screws, please verify that the glass diffuser
(M) has been removed. If not, please remove to the glass diffuser (M) to avoid
possible damages.
Fig.1
H
REV. 1
DATE 29/06/2021
RF3160100
KIT WITH SCREWS AND ALLEN KEY
IC C/W1 F3178057

8
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Position the lamp body (C) on the wall attachment and assemble the lamp
body by fastening the 2 screws (A) with the Allen key.
HINTS!!! To carry-out this operation position the lamp body close to the wall
attachment, tilt the body and slightly and tip it slightly to the left, to then fasten
it with a slight clockwise rotation.
Fig.2
A
REV. 1
DATE 29/06/2021
RF3160100
KIT WITH SCREWS AND ALLEN KEY
C
A
IC C/W1 F3178057

9
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Assemble back the glass diffuser (H) by fastening it delicately to the lamp
body’s ferrule (I).
Fig.3
H
REV. 1
DATE 29/06/2021
RF3160100
KIT WITH SCREWS AND ALLEN KEY
I
IC C/W1 F3178057