FLOS F1060026 User manual

REV. 1
DATE 16/07/2021
1
BELLHOP BATTERY
Designed by E. Barber & J. Osgerby, 2018
F1060026
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. RF1035109 –Power charger whit electrical cable and plugs
BELLHOP BATTERY
F1060026
REV. 1
DATE 16/07/2021

3
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
RF1035109
POWER CHARGER WHIT ELECTRICAL CABLE & PLUGS
BELLHOP BATTERY
F1060026
REV. 1
DATE 16/07/2021
Bon Jour
Unplugge
d
p.10
Bellhop
Battery
p.03
Last
Order
Clear
p.09
Last
Order
Fluted
p.09

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
BATTERY RECHARGE.
Insert the plug (A) into the power adaptor (D) in the working position of your choice (the
plug can be inserted into any side of the power adaptor) until you hear the snap-in
fastener go click (use the correct type of plug for country the device is installed in); to
remove the plug, press the power adapter’s button (B). Insert the USB plug (C) of the
cable provided into the power adapter’s USB port (E).
RF1035109
POWER CHARGER WHIT ELECTRICAL CABLE & PLUGS
BELLHOP BATTERY
F1060026
REV. 1
DATE 16/07/2021
D
C
B
A
UNLOC
K
CLICK!
LOCK

5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.2
BATTERY RECHARGE
. Insert the micro-USB plug (F) into the device’s connector (G); the
recharge status is indicated by the pulse frequency of the led (L) positioned on the base
of the device: when the charge level is less than 20% the led flashes at a high frequency
(every 0.5 seconds), from 20% to 90% the led flashes at a lower frequency (every 1
second), at full charge the led stays on continuously. The complete charging time is 3
hours. With the device on at 100% light intensity, the wireless operating autonomy is 6
hours (By reducing the light’s intensity it is possible to maximise the lifespan up to 24
hours ); after 6 hours, the light intensity automatically lowers to 20% and the device
signals the need to recharge with a high frequency flashing of the led (L) (every 0.2
seconds) until it is put on charge or until the battery runs down completely. NB: the
product is equipped with a self-protection system: if it stays connected to the power
adaptor beyond the indicated charging time it won’t affect the battery life (500 recharges
guaranteed).
G
L
F
RF1035109
POWER CHARGER WHIT ELECTRICAL CABLE & PLUGS
BELLHOP BATTERY
F1060026
REV. 1
DATE 16/07/2021