FLOS BELLHOP F F1070026 User manual

REV. 0
DATE 06/12/2022
1
BELLHOP F
Designed by E. Barber & J. Osgerby, 2021
F1070026
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. F1073009B
–White reflector
02. F1072009B
–Bellhop Fbase
03. RF30216
–Switch dimmer assembly 700 mA
04. RF3320400
–48V Power supply unit with plug kit
BELLHOP F
F1070026
REV. 0
DATE 06/12/2022

3
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
F1073009B
WHITE REFLECTOR
BELLHOP FF1070026
REV. 0
DATE 06/12/2022

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
BELLHOP FF1070026
REV. 0
DATE 06/12/2022
F1073009B
WHITE REFLECTOR
Remove the old reflector from the body lamp.
Assemble now the new spare parts.

5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
ENBELLHOP FF1070026
REV. 0
DATE 06/12/2022
F1072009B
BASE

6
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
REV. 0
DATE 06/12/2022
F1072009B
BASE
Fig.1
Fig.2
Remove the plug (A) from the power unit (B).
Disconnect the plug (C) to the push button
(D).
C
D
A
B
BELLHOP FF1070026

7
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.3
Unfasten the three screws under the old base (E). Disconnect it (F) from the body lamp
(G).
Assemble now the new spare parts.
Install the new base to the body lamp and fast the screw under it.
Connect the plug to the push button switch locking it by turning it 90º clockwise.
(Fig.2)
Insert the plug into the power unit. (Fig.1)
BELLHOP FF1070026
REV. 0
DATE 06/12/2022
F1072009B
BASE

8
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
ENBELLHOP FF1070026
REV. 0
DATE 06/12/2022
RF30216
SWITCH DIMMER ASSEMBLY 700MA

9
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
REV. 0
DATE 06/12/2022
RF30216
SWITCH DIMMER ASSEMBLY 700MA
Connect the plug (A) to the push button switch (B) locking it by
turning it 90º clockwise.
Fig.1
A
B
BELLHOP FF1070026

10
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
REV. 0
DATE 06/12/2022
RF30216
SWITCH DIMMER ASSEMBLY 700MA
Fig.2
Connect the plug (C) to the power unit (D) locking it in by rotating
it 90°clockwise.
D
C
BELLHOP FF1070026

EN
11
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF3320400
POWER SUPPLY UNIT WITH PLUG KIT
REV. 1
DATE 26/07/2021
BELLHOP FF1070026
Noctambule
All Floor
Versions
p.15
Captain
Flint
p.05
Sawaru
p.03
Superloon
p.13
Taccia
Led
p.13
Arco Led
p.03
Bellhop
F
p.11
Coordinates F
p.14

12
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Insert the plug into the power unit. By using the guides, snap the
plug inside its apposite slot (use the correct type of plug for the
country in which the device must be installed).
EN
Fig.1
REV. 1
DATE 26/07/2021
RF3320400
POWER SUPPLY UNIT WITH PLUG KIT
BELLHOP FF1070026