Flower House FHBB100 User manual

(4) Legs
(4) Rubber feet
(1) Lower Bow with feet connectors
(1) Upper Bow
(1) Main Chair C-Frame
(1) Bottom Flat Cushion
(1) Leisure Cushion
(1) Wrench
(2) Allen Wrench
(10) Nuts and Bolts
Parts and Assembly Instructions for:
FHBB100, FHBK100, FHEC100, FHFB100, FHSB100
(Includes all colors and variations of these part numbers)

Assembly Instructions for: FHBB100, FHBK100, FHEC100, FHFB100, FHSB100
1. Open the package
and unwrap the four
short legs and put
rubber feet on each of
the four legs (if not
already attached).
2. Connect the four
legs to the X-frame
on the lower bow of
the Egg Chair Stand
using the 4 shorter
nuts and bolts.
3. Attach upper bow
to lower bow to make
C-frame, attach
using 2 longest nuts
and bolts.
4. Open egg chair frame
completely and put the
four smallest nuts and
bolts in place.
Make sure the flat tops
are on the inside of the
chair, so they do not
poke through the fabric
or through the seat.
5. Close the top and
bottom flaps by
clasping the hooks to
the eyelets.
6. Lift the chair and open
the seatbelt attachment
strap.
7. Slide the seatbelt
attachment strap into the
holding groove on the top of
the frame.
8. Place the bottom flat
cushion on the seat of the
chair then place the leisure
cushion on top.
9. Make sure all nuts and
bolts are tightened
throughout the stand and
chair. Place in any level
location and enjoy your
Egg Chair!
Thank you for your
business!
PATENT:
www.flowerhouses.com/patents
*Specifications subject to change without notice