Fluke 1742 User manual

Quick Reference Guide
GuÍa de referencia rápida
Guia de referência rápida
PN 4885093 October 2017
© 2017 Fluke Corporation. All right reserved.
With Neutral Voltage Without Neutral Voltage
1
2
1742/1746/1748
3 Phase Power Quality Logger
See Safety Information.
Go to www.uke.com to register your product, download
manuals, and nd more information.
Vaya a www.uke.com para registrar el producto, des-
cargar manuales y obtener más información.
Acesse www.uke.com.br para registrar seu produto,
baixar manuais e para obter mais informações.
ETHERNET
USB
USB
ETHERNET
USB
USB
1 2 3
5
7
8
10 911121314
4
6
POWER QUALIT YLOGGER
1746
LED Color Status Note
Start/Stop
green
No user information or warning available.
Logger power from mains.
No connection errors detected.
amber
Information or warning available
Possible reasons: Logger power from battery or circuit
connection error detected.
Check the actual status with Energy Analyzer Plus if Wshows
white
Steady: start/stop
Do not turn off the Logger or remove the USB ash drive
Flashing: le operation in progress
Time
green Time synchronization status is OK
off External time synchronization is not in use
red Time synchronization source not available Check the time synchronization source and conguration of the Logger
Ethernet
green Ethernet link detected and IP address is assigned The LED ashes during the IP address assignment
blue Connection to the Fluke Connect Cloud is established
Fluke Connect blue Flashing: Receiving data from all congured FC modules Rapid ashing indicates loss of connection to one or all FC modules
WiFi green
Steady: Connection to a WiFi access point established
Flashing: Congured WiFi access point is out of range or the
connection can not be established
Check the WiFi access point conguration of the Logger.
Reduce the distance between the Logger and the WiFi access point. Verify that
the passphrase is correct.
blue Connection to the Fluke Connect cloud established
WiFi Hotspot
green The Logger WiFi hotspot is active
blue A client is connected to the WiFi hotspot
Item Description
AEthernet
BPower Supply Input 100-500 V 50/60 Hz 50 VA
CVoltage measurement inputs (3 phases + N)
DLED for Ethernet
ELED for Time
FPower On/Off
GLED for Fluke Connect®
HLED for WiFi
ILED for WiFi Hotspot
JCurrent measurement inputs (3 phases + N)
KAux connector
LI/O connector for GPS Receiver
MUSB connector (data download and rmware upgrade)
NMini-USB connector (data download and rmware upgrade)
Battery / Adapter Replacement
Overview LED Indicators
Power Battery Mains
Measurement Line
W Conguration and operation of this Product requires
Energy Analyze Plus software. Go to www.uke.com for
more information.
POWER QUALITY LOG GER
1746
GER
1
3
2
Hanger Kit
»
Test Leads 0.18 m Red/Black,
1000 V CAT III
Autorisierter Distributor

USB Port
1
6 7 8
2 4 53
600V CAT III
AC CURRENT CLAMP
SERIALNUMBER
POWER QUALITY LOGGE R
1746
POWER QUALITY LO GGER
1746
iFlex Current Probe Setup with Energy Analyzer Plus
i40s-EL Current Clamp
Optional Accessory
Item Description
ASingle insulated current carrying conductor
BRelease button
CLoad direction arrow
DFinger guard
Wire
Clip
Start Energy Analyze Plus
WiFi
On the Windows PC:
1. Select the Logger from the WiFi access
points in range.
2. Enter the password: uketools
USB
If Power button LED is amber see LED
indicators table.
Synchronize the date and time between the
Logger and the software.
Verify the connections. Set the limits for the power quality checks. Select averaging interval, logging duration,
and start/stop for the logging session.
Select the topology. Select the voltage, ranges and scaling, and
current.
Go to Instrument Setup>
Select Logger, and login.
Factory Default
Users name:
admin
Password:
<blank> or admin