971 Temperature Humidity Meter
Carbon Monoxide Meters
Quickly take accurate humidity and
temperature readings in the air.
Temperature and humidity are two
important factors in maintaining optimal
comfort levels and good indoor air quality.
The Fluke 971 is invaluable for facility
maintenance and utility technicians,
HVAC-service contractors, and specialists
who assess indoor air quality (IAQ).
Lightweight, rugged, and easy to hold, the
Fluke 971 is the perfect tool for monitoring
problem areas.
•Simultaneously measures humidity and
temperature
•Measures dew point and wet bulb
•99 record storage capacity
•Min/Max/Avg Data Hold
•Ergonomic design with built-in belt clip
and protective holster
•Backlit, dual readings display
•Twist-open protective cap
•Low battery indicator
Included Accessories
Fluke CO-220 + CO-210
C50 soft carrying case and
battery
CO-210 cord to plug into a digital
multimeter
Ordering Information
Fluke 971 Temperature Humidity
Meter
Fluke CO-220 Carbon Monoxide Meter
CO-205 Aspirator Kit
CO-210 Carbon Monoxide Probe
Specifications
Operating temperature:
Temperature: -20 °C to 60 °C
Humidity: 0 °C to 60 °C
Storage temperature: : -20 °C to 55 °C
Battery life: 4 AA alkaline, 200 hours
Safety: Complies with EN61326-1
Weight: 0.188 kg
Size (HxWxD): 194 mm x 60 mm x 34 mm
One Year Warranty
Fluke 971
Temperature Humidity Meter
-20 °C to 60 °C
±0.5 °C
±1.0 °C
0.1 °C
500 ms
NTC
5% to 95% R.H.
±2.5 % R.H.
±5.0 % R.H.
Electronic capacitance polymer film sensor
99 points
For 90% of total range – 60 sec with 1 m/s air movement
Temperature range
Temperature accuracy
0 °C to 45 °C
-20 °C to 0 °C and 45 °C to 60 °C
Resolution
Response time (temperature)
Temperature sensor type
Relative humidity range
Relative humidity accuracy
10 % to 90 % R.H. @ 23 °C
<10 %, > 90 % R.H. @ 23 °C
Humidity sensor
Data storage
Response time (humidity)
Fluke 971
Carbon Monoxide Meters
CO-220 Carbon Monoxide Meter
The CO-220 Carbon Monoxide Meter makes it easy to take
quick and accurate measurements of CO levels. A large, backlit
LCD display shows CO levels from 0 to 1000 PPM. The MAX
Hold function stores and displays the maximum CO level.
1 year warranty.
CO-210 Carbon Monoxide Probe
As an accessory to a digital multimeter with dc mV inputs,
the Fluke CO-210 displays CO levels from 0 to 1000 PPM.
As a standalone device, the LED indicator and beeper trigger
with increasing frequency as the CO level rises.
1 year warranty.
CO-205 Aspirator Kit
Allows flue gas samples up to 371°C to be drawn with the
CO-210 or CO-220 for carbon monoxide measurement.
1 year warranty.
Fluke CO-220
Fluke CO-210
Fluke CO-205
