Fluke ESA614 User manual

FBC-0110
August 2018, Rev.1
© 2018 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
ESA614
Electrical Safety Analyzer
Users Manual

Warranty and Product Support
Fluke Biomedical warrants this instrument against defects in materials and workmanship for one year from the date of
original purchase OR two years if at the end of your first year you send the instrument to a Fluke Biomedical service center
for calibration. You will be charged our customary fee for such calibration. During the warranty period, we will repair or at our
option replace, at no charge, a product that proves to be defective, provided you return the product, shipping prepaid, to
Fluke Biomedical. This warranty covers the original purchaser only and is not transferable. The warranty does not apply if the
product has been damaged by accident or misuse or has been serviced or modified by anyone other than an authorized
Fluke Biomedical service facility. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE
EXPRESSED OR IMPLIED. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.
This warranty covers only serialized products and their accessory items that bear a distinct serial number tag. Recalibration
of instruments is not covered under the warranty.
This warranty gives you specific legal rights and you may also have other rights that vary in different jurisdictions. Since
some jurisdictions do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages,
this limitation of liability may not apply to you. If any provision of this warranty is held invalid or unenforceable by a court or
other decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of any other provision.
7/07

Notices
All Rights Reserved
Copyright 2018, Fluke Biomedical. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language without the written permission of Fluke Biomedical.
Copyright Release
Fluke Biomedical agrees to a limited copyright release that allows you to reproduce manuals and other printed materials for use in service
training programs and other technical publications. If you would like other reproductions or distributions, submit a written request to
Fluke Biomedical.
Unpacking and Inspection
Follow standard receiving practices upon receipt of the instrument. Check the shipping carton for damage. If damage is found, stop unpacking
the instrument. Notify the carrier and ask for an agent to be present while the instrument is unpacked. There are no special unpacking
instructions, but be careful not to damage the instrument when unpacking it. Inspect the instrument for physical damage such as bent or
broken parts, dents, or scratches.
Technical Support
For application support or answers to technical questions, either email techservice[email protected] or call 1-800-850-4608 or 1-440-
248-9300. In Europe, email [e-mail] or call [phone].
Claims
Our routine method of shipment is via common carrier, FOB origin. Upon delivery, if physical damage is found, retain all packing materials in
their original condition and contact the carrier immediately to file a claim. If the instrument is delivered in good physical condition but does not
operate within specifications, or if there are any other problems not caused by shipping damage, please contact Fluke Biomedical or your local
sales representative.

Returns and Repairs
Return Procedure
All items being returned (including all warranty-claim shipments) must be sent freight-prepaid to our factory location. When you return an
instrument to Fluke Biomedical, we recommend using United Parcel Service, Federal Express, or Air Parcel Post. We also recommend that
you insure your shipment for its actual replacement cost. Fluke Biomedical will not be responsible for lost shipments or instruments that are
received in damaged condition due to improper packaging or handling.
Use the original carton and packaging material for shipment. If they are not available, we recommend the following guide for repackaging:
Use a double–walled carton of sufficient strength for the weight being shipped.
Use heavy paper or cardboard to protect all instrument surfaces. Use nonabrasive material around all projecting parts.
Use at least four inches of tightly packed, industry-approved, shock-absorbent material around the instrument.
Returns for partial refund/credit:
Every product returned for refund/credit must be accompanied by a Return Material Authorization (RMA) number, obtained from our Order
Entry Group at 1-440-498-2560.
Repair and calibration:
To find the nearest service center, go to www.flukebiomedical.com/service or
In the U.S.A. and Asia:
Cleveland Calibration Lab
Tel: [phone] x2564
Email: [email protected]
In Europe, Middle East, and Africa:
Eindhoven Calibration Lab
Tel: [phone]
Email: [email protected]
To ensure the accuracy of the Product is maintained at a high level, Fluke Biomedical recommends the product be calibrated at least
once every 12 months. Calibration must be done by qualified personnel. Contact your local Fluke Biomedical representative for
calibration.
Certification
This instrument was thoroughly tested and inspected. It was found to meet Fluke Biomedical’s manufacturing specifications when it was
shipped from the factory. Calibration measurements are traceable to the National Institute of Standards and Technology (NIST). Devices for
which there are no NIST calibration standards are measured against in-house performance standards using accepted test procedures.

WARNING
Unauthorized user modifications or application beyond the published specifications may result in electrical shock hazards or improper
operation. Fluke Biomedical will not be responsible for any injuries sustained due to unauthorized equipment modifications.
Restrictions and Liabilities
Information in this document is subject to change and does not represent a commitment by Fluke Biomedical. Changes made to the
information in this document will be incorporated in new editions of the publication. No responsibility is assumed by Fluke Biomedical
for the use or reliability of software or equipment that is not supplied by Fluke Biomedical, or by its affiliated dealers.
Manufacturing Location
The ESA614 is manufactured at Fluke Biomedical, 6920 Seaway Blvd., Everett, WA, U.S.A.

i
Table of Contents
Title Page
Notices ........................................................................................................................... 3
Introduction .................................................................................................................... 1
Intended Use.................................................................................................................. 2
Safety Information .......................................................................................................... 2
Unpack the Product........................................................................................................ 5
Instrument Familiarization .............................................................................................. 6
How to Hold the Product ................................................................................................ 10
Connect to Line Power................................................................................................... 10
Turn On the Product....................................................................................................... 11
How to Access the Product Functions............................................................................ 12
Connect a DUT to the Product ....................................................................................... 13
Connect a PC to the Product.......................................................................................... 15
Set Up the Product......................................................................................................... 17
Set the Operator Name ............................................................................................. 17
Delete an Operator Name ......................................................................................... 18

ESA614
Users Manual
ii
Set the Date.............................................................................................................. 18
Set the Time.............................................................................................................. 18
Set the GFCI Limit .................................................................................................... 19
Set Polarity Switching Delay..................................................................................... 19
Set the Date Format.................................................................................................. 19
Set the Time Format ................................................................................................. 20
Set the Language...................................................................................................... 20
Set the Beeper.......................................................................................................... 20
Set the Display Contrast ........................................................................................... 20
Set up the Printer...................................................................................................... 21
Set the Printer Type ............................................................................................. 21
Set the Print Header............................................................................................. 21
Set the Print Rotation........................................................................................... 22
Set the Test Interval............................................................................................. 22
Reset a Label Printer ........................................................................................... 22
How to View Instrument Information.............................................................................. 23
How to Do Electrical Safety Tests.................................................................................. 23
Line Voltage Test...................................................................................................... 23
Ground Wire Resistance Test................................................................................... 23
Insulation Resistance Test........................................................................................ 28
Equipment Current Test............................................................................................ 34
Leakage Current Test ............................................................................................... 34
Ground Wire Leakage Current ............................................................................. 34
Chassis Leakage Test.......................................................................................... 36
Lead-to-Ground Leakage Test ............................................................................. 38
Lead-to-Lead Leakage Tests ............................................................................... 40
Lead Isolation Leakage Test..................................................................................... 42
How to Use the 1-to-10 Adapter .................................................................................... 44
How to Do Point-To-Point Measurements ..................................................................... 48

Contents (continued)
iii
Measure Voltage ....................................................................................................... 48
Measure Resistance.................................................................................................. 48
Measure Current........................................................................................................ 49
How to Simulate ECG Waveforms ................................................................................. 49
Memory .......................................................................................................................... 51
Test Sequences ............................................................................................................. 51
Factory Supplied Test Sequences............................................................................. 51
How to Make a Test Sequence.................................................................................. 53
Make a New Test Sequence................................................................................. 53
Make a Test Sequence from a Test Sequence in the Test Library ....................... 57
Edit a Test Sequence ................................................................................................ 57
Do a Test Sequence.................................................................................................. 58
Show Test Results..................................................................................................... 59
Print Test Results ...................................................................................................... 59
Delete a Set of Test Results...................................................................................... 60
Maintenance................................................................................................................... 60
Fuse Test and Fuse Replacement............................................................................. 61
How to Clean the Product.......................................................................................... 62
Replaceable Parts.......................................................................................................... 63
Accessories.................................................................................................................... 64
Specifications................................................................................................................. 65
Detailed Specifications................................................................................................... 66

ESA614
Users Manual
iv