Fluke VT06 Original instructions

VT06/VT08
Visual IR Thermometer
Safety Information
To register your product, or to view, print, or download the latest
manual or manual supplement go to our website: www.fluke.com.
A Warning identifies hazardous conditions and procedures that
are dangerous to the user. The laser warnings, symbols, and
specifications apply only to Products with lasers.
*W Warning
To prevent possible electrical shock, fire, or personal
injury and for safe operation of the Product:
Read all safety information before you use the
Product.
Carefully read all instructions.
Do not alter the Product and use only as specified, or
the protection supplied by the Product can be
compromised.
Do not use the Product around explosive gas, vapor,
or in damp or wet environments.
Do not use the Product if it is altered or damaged.
Do not put battery cells and battery packs near heat or
fire. Do not put in sunlight.
PN 5318079 (English)
August 2021
©2021 Fluke Corporation. All rights reserved. Specifications are
subject to change without notice. All Product names are trademarks of
their respective companies.
Fluke Corporation
P.O. Box 9090
Everett WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
1-Year Limited Warranty.
See the Users Manual for the full warranty.
É

Do not disassemble or crush battery cells and battery
packs.
Use only Fluke approved power adapters to charge
the battery.
Batteries contain hazardous chemicals that can cause
burns or explode. If exposure to chemicals occurs,
clean with water and get medical aid.
Disconnect the battery charger and move the Product
or battery to a cool, non-flammable location if the
rechargeable battery becomes hot (>50 °C) during the
charge period.
Replace the rechargeable battery after 5 years of
moderate use or 2 years of heavy use. Moderate use is
defined as recharged twice a week. Heavy use is
defined as discharged to cutoff and recharged daily.
Do not short the battery terminals together.
Do not keep cells or batteries in a container where the
terminals can be shorted.
Do not look into the laser. Do not point the laser
directly at persons or animals or indirectly off
reflective surfaces.
Do not look directly into the laser with optical tools
(for example, binoculars, telescopes, microscopes).
Optical tools can focus the laser and be dangerous to
the eye.
Do not open the Product. The laser beam is dangerous
to eyes. Have the Product repaired only through an
approved technical site.
Do not use laser viewing glasses as laser protection
glasses. Laser viewing glasses are used only for
better visibility of the laser in bright light.
See emissivity information for actual temperatures.
Reflective objects result in lower than actual
temperature measurements. These objects can pose a
burn hazard.
Use only specified replacement parts.
Have an approved technician repair the Product.
Do not use the Product for medical reasons. The
product is intended for equipment evaluation only and
should never be used in diagnostics, treatment, or any
other capacity where the Product would come in
contact with a patient.

Symbols
The table below lists the symbols that can be used on the Product
or in this document.
Symbol Description
»Consult user documentation.
WWARNING. RISK OF DANGER.
*WARNING. LASER RADIATION. Risk of eye
damage.
Indicates a Class 2 laser. DO NOT STARE INTO
BEAM. The following text may appear with the
symbol on the product label: “IEC/EN 60825-
1:2014. Complies with 21 CFR 1040.10 and
1040.11 except for deviations pursuant to
Laser Notice 50, dated June 24, 2007.” In
addition, the following pattern on the label will
indicate wavelength and optical power:
λ= xxxnm, x.xxmW.
bBattery status. Battery charging when
animated.
OOK button. Push to open a menu, set an option,
or turn on the flashlight.
QMenu symbol. Push Oto open the menu or
set options.
VFlashlight symbol. Push Ofor 2 sec to turn
on or off the flashlight.
RUp and down arrow button. In a menu, push to
highlight a menu option.
PBack button. In a menu, push to go back to the
previous screen.
UOn/Off symbol. Push Pfor 2 sec to turn on
or off the Product.
™USB port
PConforms to European Union directives.
LASER
2

Specifications
´
This Product contains a lithium-ion battery. Do
not mix with the solid waste stream. Spent
batteries should be disposed of by a qualified
recycler or hazardous materials handler per
local regulations. Contact your authorized
Fluke Service Center for recycling information.
~
This product complies with the WEEE Directive
marking requirements. The affixed label
indicates that you must not discard this
electrical/electronic product in domestic
household waste. Product Category: With
reference to the equipment types in the WEEE
Directive Annex I, this product is classed as
category 9 “Monitoring and Control
Instrumentation” product. Do not dispose of
this product as unsorted municipal waste.
Te m p e ra t u r e
Operating -10 °C to 50 °C (14 °F to 122 °F)
Storage -20 °C to 60 °C (-4 °F to 140 °F)
Power
Battery Rechargeable Lithium-ion battery
Battery life, as
tested
≥5 hours continuous (VT08)
≥8 hours continuous (VT06)
Actual battery life depends on settings and
usage
Charge time ≤2.5 hours to full charge
Battery charge
temperature 0 °C to 45 °C (32 °F to 113 °F)
Battery charging
system In-Thermometer charging
AC power
adapter
AC operation with included power supply,
universal adapters included
Output: 5 VDC, 2 A
Power save Enables or disables auto power off
Symbol Description

Electromagnetic Compatibility (EMC)
International
IEC 61326-1: Industrial Electromagnetic
Environment
CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or uses
conductively coupled radio frequency energy that is
necessary for the internal function of the equipment itself.
Class A: Equipment is suitable for use in all establishments
other than domestic and those directly connected to a low-
voltage power supply network that supplies buildings used
for domestic purposes. There may be potential difficulties in
ensuring electromagnetic compatibility in other
environments due to conducted and radiated disturbances.
Caution: This equipment is not intended for use in residential
environments and may not provide adequate protection to
radio reception in such environments.
Korea (KCC) Class A Equipment (Industrial Broadcasting
& Communication Equipment)
Class A: Equipment meets requirements for industrial
electromagnetic wave equipment and the seller or user
should take notice of it. This equipment is intended for use in
business environments and not to be used in homes.
USA (FCC)
47 CFR 15 subpart B. This product is
considered an exempt device per clause
15.103.