Flyingbear P902 User manual

1
；

2
Catalog
Ⅰ、User notes........................................................................................... 3
Ⅱ、Installation of software and driver..................................................... 4
Ⅲ、Set Printer(taking Windows 10 system as an example)................... 12
Ⅳ、Set slice software and function description..................................... 17
Ⅴ、Printer's connection and leveling..................................................... 24
Ⅵ、Print product ................................................................................... 30
Ⅶ、Maintenance..................................................................................... 36

3
Ⅰ.User notes
1. This equipment is an industrial product,not a toy,please be sure to place in the area away from the
kids so as not to cause damage.
2. In the working process,the nozzle and the hot bed are high temperature zone,please do not touch so
as to avoid serious burns
3. This equipment can only be used in the country and region,it’s forbidden to make products that obey
the law of the country and region.People who violate the law must responsible for their own.
4. During the working process,due to the different filament,it will produce odor,please keep the room
airy.If you feel uncomfortable,you should go to the hospital and get some treatment.
5. This equipment is open source code designed,you can search or buy the model you like on the
international network to print.We will provide you with a computer terminal software as a reference
when you buy our product.
6. After testing,PLA and ABS is apply to this equipment,please do not try other type of material to print.If
you do that,you should bear the loss yourself.
7. Instructions and warnings to be updated at any time as required, we have no obligation to

4
inform.Please contact us in time to obtain the latest information and warning information.
8. The company reserves the right of final interpretation.
Ⅱ.Installation of software and driver
1. Open the program Repetier-Host_1_5_5 in the folder “FlyingBear 3D Printer”

5

6

7

8
Install Driver

9

10

11
Ⅲ.Set Printer (taking windows 10 system as an example)
1、 Click

12
2、Set“Connection”
Port :According to the ports in Device
manager （COM＆LPT）to choose,
(Notice: Each computer is
different,my computer is COM5.)
Baud Rate：fill in“250000”
Other parameters remain the same.

13
3、Set “Printer”
Reference temperature:
Print PLA
Extruder temperature： 205℃ around
Bed temperature：65℃ around
Print ABS
Extruder temperature： 230℃ around
Bed temperature：80~100℃ around
Other parameters remain the same.

14
4、Set“Extruder”
Number of Extruder：1
Name：P9.2-0.4
Diameter：default it is 0.4,Please fill
in it according to your nozzle’s
diameter.
Other parameters remain the same.

15
5、Set“Printer Shape”
Printer：FlyingBearP902
X Max：220
Y Max：220
Bed Left：10
Bed Front：0
Print Area Width：220
Print Area Depth：220
Print Area Height ：275(Notice:The
actual size is 280,but due to each
customer’s installation is different,it
is possible to cause the size is small
than 280.So it’s more safe to fill in
275. )
Other parameters remain the same.

16
Ⅳ.Set slice software and function description
1、Click “Slicer”---Choose“Sli3r”---Click “Configuration”，Open Slic3r

17
2、“Print Settings”parameter introduction
ColiDo Best：thickness 0.15mm，Suitable for printing small model and exquisite model
ColiDo draft：thickness 0.3mm，Suitable for fast printing
ColiDo standard：thickness 0.2mm，Suitable for printing large models
ColiDo standard ABS：thickness 0.2mm，Suitable for printing ABS
ColiDo support：thickness 0.15mm，Suitable for printing model needs to support
ColiDo thin wall：thickness 0.15mm，Suitable for printing thin-wall model below 2mm

18
3、“Filament Settings”parameter setting
“Filament”
parameter
Please fill in the
parameter according to
the picture,do not leave
any of them

19
“Cooling”
parameter
Please fill in the
parameter according to
the picture,do not leave
any of them

20
Click “save”
Pop-up window “Save
Preset ”, Enter the
name “FlyingBear
PLA-60”
Click“OK”to save