FLYSURFER FlyRace User manual

Thin area at heelside
Footpads
Footstraps
Tip Fin 6 cm
Fin Adjustment System
Bungee Line
Screws for Footstrap 20 mm
Screws for Tip Fin 20 mm
Screws for Fin Adjustment System 16mm
Screw for Bungee Line 12 mm

1. Insert the screw (20 mm) through the strap and the pad into the insert
of the board and tighten the screw by using a screwdriver.
3. Assemble the fin adjustment system with the black rubber-surface
facing upwards.
2. Attach the bungee line to the board
by screwing it (12 mm) into the insert.
4. Screw the assembled fin adjustment
system on to the board (16 mm screws).

5. Fix the tip fins to the board using the 20 mm screws (2 per fin) and
tighten the screws.
7. Make a loop with the adjustment
strap and wrap it around the fin handle.
6. Put the rubber line through the fin
and make a knot
RIDING ADVICE > Keep board flat while riding
> Learn to ride with the fin, by increasing depth step by step

FLYSURFER Kiteboarding
Brand of Skywalk GmbH & Co. KG
Windeckstr. 4
83250 MARQUARTSTEIN, GERMANY
[phone] - 30
 www.flysurfer.com
[e-mail]