
_________________________________________________________________________________________________________________
_________________________________________________________
@Page5of6
UsingtheFMTransmitter
1Press PowerButton to turnon the DigitalTransmitter.The LCD Digital Display showsthe pre-set radiofrequency
channel(Forexample, 98.0MHz).
2. Turnon yourradioand switchto FMchannel,adjustthe radiofrequencychannelto desired channel.Now theradiowill
output as “zzz”sound orradio music now.
3. Then adjustthe radiofrequencychannelofthe DigitalTransmitterto the sameradiofrequencychannelofthe radio. (For
example, ifthe radiofrequencychannelis set to 98.0MHzthen the FM Transmittershouldalsobe set to 98.0MHz). When the
radiofrequencychannelofthe DigitalTransmitterandthe radioaresame, the “zzz”sound will stop. Adjustthe volumeto
mediumleveliniPod oraudioplayer,and startplaying music.Now you will hearthe music playing fromthe mp3oraudio
playerwill output fromthe radio. Note:Ifvolumelevelfrommp3 oraudioplayerishigh,the musicoutputfromtheradiowill
sound distorted.
5. Adjust the volume inyourradio until the satisfactoryoutput is reached.
6. When interferenceoccurs,the musicfromradiowillnot sound clear.Inthiscase, pleaseswitchto different channels by
repeating Step 2 and 3 until the music sound qualityis clearagain.
Adjustment of RadioFrequencyChannels
1.Press PowerButton to turn on the FMTransmitter
2.Adjust the FMfrequencychannels: (Radio frequencychannels adjustment range is 87.0MHz~108.0MHz.)
3.Press FrequencyUp/DownButton to increase/decrease 0.1MHzradio frequencychannels on the Transmitter.
4.Press and holdthe FrequencyUp/DownButton tocontinuouslyincrease/decreaseradiofrequencychannels on the
Transmitter.
PowerOn/Off and Power
Press PowerButton turn off the FMTransmitter.
Important Notice
This product should be keptin drycondition and awayfromwater.
Keep the product offdirectsunlight orhigh temperatureenvironment.
Please unplug the powerplug when it is not in use.
Troubleshooting
1)Ifthe FMTransmitterdoesnot function normally,
Pleasecheck whetherallwires/ cablesbeing connected tight and correct.
Ifthe productcannot be powered on, check whetherthe AC adapterworks and connectsproperly.
2)Ifmusic output fromthe radio is distorted (not clear),
First, reducevolumefromiPod oraudioplayerto mediumorlowervolumerange, and then turnup volumefromradioto
desired level. The music sound qualityshould improve.
Ifthe perviousmethod doesnot improvethe music sound quality,itmeanstheproblemmaybe due to frequency
interference. Then you need to switch to otherchannel.
3)Ifthe volume output fromthe radio is too loud when theFMTransmitteris not being in use,
When FMTransmitteris inused, desired volumeoutput levelfromthe radiois typicallyhigherthan withoutusing FM
Transmitter.Toprevent the volumeoutput too loud when the FMTransmitteris not being inuse, you can decreasethe radio
volume and increase the iPod oraudio playervolume aslong asthe sound fromthe radio remainsclear.
4)Ifmusic output fromthe radio have current acoustic interference,
Tryto change the location ofthe transmitter,orchange the location ofthe powersupply,orchange the location ofthe
audio line. Powersupplymust be awayfromthe transmitterat work.
www.fmuser.org