FMUser SDA-01A User manual

www.fmuser.net skype:rita.cai87 MSN: [e-mail]
SDA-01A USER MANUAL
1. Attention before use
1).Only professional technicians are allowed to do maintainence of the transmitter
2).Please set anti-thunder protections during bad weather(thunder, storm.etc)
3). Please don’t turn on the transmitter without connecting the antenna well.
4).Please don’t use the transmitter in the explosive environment(gas station, steam, etc)
5).Pleae don’t use the transmitter in very damp/dusty/high temperature environment.
6). Please use the transmitter following the local wireless adminitration regulations.
2. Menu
1) Features
2) Configurations
3) The picture of front and back panel
4) Knob and buttons description
5) Operation Steps
6) Technical Specification
7) Troubleshooting
8) PC control software description
3.Product Features
SDA-01Ais a new advanced FM transmitter with excellent and stable performance, easy operation,
high definity sound quality and other outstanding features. It has exquisite design and professional
look.
Main Features:
1). Wide frequency range: 76~108MHZ
2). Optional Channels: STEREO/MONO
3). Count down Power ON/OFF function
4). Power output is adjustable from 0~1w.
5). One button to control all the functions. Easy to operate.
6). Adopting several protection methods, it has strong empty load protection ability.
7).PC control of the transmitter easily through the software SDA-01APC CONTROL.
8). Working status lighting:When the transmitter is OFF, the backlight of the knob is red. When the
transmitter is working, the backlight of the knob is blue.
4. Product Configuration
No.
Name Description Quantity
Unit Port
1 The transmitrer SDA-01A 1 pcs NO
2 Helical antenna L/TNC connector
1 pcs ANT
3 Power adapter DC12V/1A 1 set 12.0V-1.0A

www.fmuser.net skype:rita.cai87 MSN: [e-mail]
4 USB cable USB male to male
1 pcs PC Control
5 Audio cable 1 1to2 3.5mm to the
Lotus plug 1 pcs LINE IN
6 Audio cable 2 3.5mm connector
male to male 1 pcs
7 Microphone 3.5mm connector,
Electret 1 set
8 Manual Hardware and
software manual 2 pcs NO
5. The Front and Back Panel of The Transmitter
1.Front Panel
2.Back Panel

www.fmuser.net skype:rita.cai87 MSN: [e-mail]
6.Knob Description
No. Operation Function Description
1 Turn Adjust Shifting between the main page and parameter adjusting pages, (clockwise direction means
increase, Counterclockwise means reduce)
2 Short press Confirm 1、Enter/Exit the adjusting page 2、Restart the transmitter by short press the button
at standby status.
3 Holding press
Confirm
1、On the main page, press and hold the knob, the
transmitter will shift to standby status.
2、At standby status, press and hold the knob to
enter the setting page
4 Knob backlight
Showing
working status
1、The light is red when standby
2、The light is blue when working normally
7. Operation Steps
1) Main page display
After power on the transmitter, the screen will show the following:
2) Main page symbol explanation
NO SYMBOL NAME DESCRIPTION
1 xxx.xMHz Frequency The current broadcasting frequency is

www.fmuser.net skype:rita.cai87 MSN: [e-mail]
xxx.xMHz
2 Power Output
Level The current power output is x x level
5 x x Line-in
Volume Level
The volume of line in is x x level.
3 Stereo The audio channel is Stereo
4
Mono The audio channel is Mono
Remark: x stands for numerals
Remind: In the adjusting pages, if there is no action in 30seconds, the screen will
automatically goes back to main page.
3) Line-in Volume
When the screen is on main page(Piture-01), turn the knob between 00~
30 level to adjust the volume.
Picture-01
4) When the screen is on main page, press the knob to enter the parameter adjusting pages,
there are 6 pages in total.When the screen shows 【6 MENU EXIT】, press the knob to exit
and go back to main page.
5) Frequency adjusting【1MENU FREQ】
At the page of【1 MENU FREQ】on the screen(Picture-02), press the knob to enter frequency
adjusting page (Picture-03). Turn the knob between 76M~108M to set the frequency, press the
knob to go back to the page of【1 MENU FREQ】.
Picture-02 Picture-003
6) Microphone Volume Adjust【2 MENU MIC】
At the page of【2 MENU MIC】（Picture-04），press the knob to adjust the microphone volume
between 00~30 levels(picture-05), press the knob to go back to【2 MENU MIC】after setting.
Picture-04 Picture-05

www.fmuser.net skype:rita.cai87 MSN: [e-mail]
7). Scheduled Power ON/OFF【3 MENU APO】
a) At the page of【3 MENU APO】(Picture-06)，press the knob to enter scheduled Power OFF
setting page,(picture-07), the time range is from 00：00：00~9：59：59（hour：minute：second）.After
setting, press the knob to go back to 【3 MENU APO】page.
Picture-06 Picture-07
b) When the screen is showing OFF, it is in the standby status (piture-08), press and hold the
knob to enter scheduled power ON page, the setting range is 00：00：00~9：59：59（hour：minute：
second），after setting, press the knob to confirm. The transmitter will begin scheduling power ON.
Picture-08 Picture-09
8). Audio channel shifting【4 MENU ST OR MO】
At the page of【4 MENU ST OR MO】(picture-10), press the knob to enter MONO/STEREO
shifting page(picture-11, picture-12). Turn the knob to set the channel and press it to confirm and
go back to Menu page.
Picture-10 Picture-11 Picture-12
9). Power Output Adjusting【5 MENU POWER】
At the page of【5 MENU POWER】(Picture-13), press the knob to the power setting
page(picture-14), turn the knob between level 00-15 to set the power output and press to confirm,
then go back to the menu page.
Picture-13 Picture-14
10).Back to main page【6 MENU EXIT】

www.fmuser.net skype:rita.cai87 MSN: [e-mail]
At the page of【6 MENU EXIT】(picture-15),press the knob to confirm and go back to main
page.
Picture-15
11). Power OFF/ON
a) At the main page, press and hold the knob to turn OFF the transmitter (picture-16).
Picture-16
b)When the transmitter is OFF, press the knob, the transmitter will return to previous working
status.
8. Technical Specification
No. Item Specification
1 Working Voltage DC12V
2 Working Current ﹤0.5A
3 Frequency Range 76~108MHz
4 Frequency Stability ±10PPM
5 Frequency Stepping 100KHz
6 Environment Temperature
-10 ~℃50℃
7 Output Impedance 50Ω
8 RF power output 0W~1W
9 Harmonics, spurious
radiation ≤－50dB
10 Audio distortion ≤0.3%
11 Frequency Response 50Hz~15000Hz
12 Seperation ≥40 dB
13 Input level ≤－15 dBV
14 Frequency Modulation ±75KHZ

www.fmuser.net skype:rita.cai87 MSN: [e-mail]
15 SNR ≥60 dB
16 Size 140 ㎜（L）*105 ㎜（W）*43 ㎜ （H）
（Excluding protrusions ）
17 Weight 550g
9. Troubleshooting
No. Problems Possible Reasons
1 The transmitter can’t
be turned ON
1）The socket is not with electricity；
2）Power adapter is not plugged well；
3）Power adapter is not standard 12V1A。
2 Very short
transmitting range
1）Working environment is not good；
2）Power output is at small value；
3）The antenna is placed too low；
4）The frequency of transmitter doesn’t match
that of antenna；
5）The reception of receiver is not good.
3 No power output 1）The power output needs to be adjusted；
2）The transmitter is in OFF status.
4 Line-in with no sound
1）The line-in volume is at low value
2）The line-in signal is not normal；
3）The audio cable is not connected well.
5 Microphone with no
sound
1）The microphone is not working well；
2）The microphone volume is at low value；
3）The microphone is not Electret.
6 Audio quality is low
1）The microphone has low quality；
2) The audio cable has weak performance in
anti-jamming；
3）The audio input effect is not good；
4）The antenna is not well installed；
5）The volume of audio
input/transmitter/receiver is not adjusted
properly.
10. PC Control software
When the transmitter is working well, use the USB cable(male to male) to connect the
transmitter and computer. Run the execute file, the transmitter will be under control of the software.
Please go to relative website to download the software and corresponding manual.
Attention: Since the antenna will be directed plugged on the transmitter, it is very near to the
controlling computer, there might be interference to the computer and possibly cause non-function

www.fmuser.net skype:rita.cai87 MSN: [e-mail]
of the software. Thus if this problem happens, please change to another computer with higher
configuration, or use other indoor antennas to keep away from the transmitter and computer.