Focal Point Charmough Assembly Instructions

This product is only suitable for well insulated spaces or occasional use.
N11/17

9
9
9
10
10
9

This product is only suitable for well insulated spaces or occasional use.
1650W

-CONTINUED
4
Focal Point Fires plc.
Christchurch,Dorset BH23 2BT
SITE

5
SITE

6
F C
8.Day button
9.
10
3.Timer
4.Heater
5.
6
7
1H 2H 3H 4H 5H 6H 7H 8H 9H OF 1H(cycle)
C
C
CONTROL PANEL

Timer
Switch on
Switch off
Time
Celsius
Day
Day
7
Press Display Flame
FULL
HIGH
MEDIUM
LOW
DIM
1st Press L1
L2
L3
L4
L5
2nd Press
3rd Press
4th Press
5th Press
9.0 OPERATING THE APPLIANCE-CONTINUED
C
C
CCCC C
CCC C
This button turns the heater function on/off and “+”“-”to
select the temperature
1. At standby state (after the unit is plugged in and before pressing "Main power"), press the Setting button on the remote control for 3
seconds,or press theTimer button on the machine keypad for 3 seconds,the digital display would be “00:00” flashing.

8
C
C
C
C
day
and flash
and use "-" to remove the desired day
use Day button to select the desired
9.0 OPERATING THE APPLIANCE-CONTINUED
C C C C C
C
CC
CC
C
Useremote control's Heater button to select temperature
10
shows all of the days selected.
,
display
Day button

9
Replace them with two AAA batteries.

10

11