Follett Horizon HCC1000WHT User manual

00159913R06
208264
StockModule Identification Plate
ServiceNo.
ModuleNo.
Product
REFRIGERANT
MODEL
MOTORCOMPRESSORTHERMALLYPROTECTED
EastonPennsylvania
FULLLOADAMPS
MAX.BRANCHCIRCUITFUSESIZE
MIN.BRANCHCIRCUITAMPACITY
DESIGNPRESSUREHIGH SIDE
AMPS
AMPS
VOLTS
CORPORATION
SERIALNO
PHASE
SINGLE
CHARGE
LOWSIDE
PARTNO
PSIG
THEUSA
MADEIN
OZ
R
C
R
HZ
UL
L
NSF
U
Order parts online
www.follettice.com
Horizon™Ice Machine Installation Instructions
for Harmony™Top-mount Applications
HCC1000AHT, HCC1400AHT, HCC1000WHT, HCC1400WHT,
HMC1000AHT, HMC1400AHT, HMC1000WHT, HMC1400WHT,
HCE1000AHT, HCE1400AHT, HCE1000WHT, HCE1400WHT
HME1000AHT, HME1400AHT, HME1000WHT, HME1400WHT
(See model number congurator on page 2 for details.)
self-contained
Horizon top-mount ice machines
t most countertop dispensers manufactured by
Cornelius • Lancer • SerVend
801 Church Lane • Easton, PA 18040, USA
Toll free [phone] • [phone]
www.follettice.com

2self-contained HARMONY • TOP-MOUNT
ConfigurationApplication
S RIDE™
(RIDE remote
ice delivery
equipment)
T Top-mount
400 up to
454 lbs
(206kg)
1000 up to
1036 lbs
(471kg)
1400 up to
1450 lbs
(658kg)
1650 up to
1580 lbs
(717kg)
V Vision™
H Harmony™
B Ice storage bin
J Drop-in
M Ice Manager
diverter valve
system
CondenserSeriesVoltageIcemaker
C 208-230/60/1 (icemaking head)
Self-contained only.
D 115/60/1 (icemaking head)
Self-contained and remote. If remote
unit, high side is 208-230/60/1.
E 230/50/1 (icemaking head)
Self-contained only.
F 115/60/1 (icemaking head)
Remote only. High side is
208-230/60/3.
MC Maestro™
Chewblet®
(400 Series)
HC Horizon
Chewblet
(1000, 1400,
1650 Series)
HM Horizon
Micro Chewblet
HC 1400CSVA
A Air-cooled, self-contained
W Water-cooled, self-contained
R Air-cooled, remote condensing unit
N Air-cooled, no condensing unit for
connection to parallel rack system
Chewblet®Ice Machine Model Number Configurations

HARMONY • TOP-MOUNT self-contained 3
87
5 6
43
21
Read and complete the following 8 installation steps
Front coverInternal connection
External connection
Louvered docking assembly
Bin preparation
Site preparationUnpack
Ice transport tube

4self-contained HARMONY • TOP-MOUNT
Carefully unpack and inspect the contents of your Follett ice machine. 1
Unpack
1/2"
1/2"
➊➋
➌➍
➎➏
Unpack ice machine
1. 1

HARMONY • TOP-MOUNT self-contained 5
Prepare the installation site. 2
208264
StockModule Identification Plate
ServiceNo.
ModuleNo.
Product
REFRIGERANT
MODEL
MOTORCOMPRESSORTHERMALLY PROTECTED
EastonPennsylvania
FULLLOADAMPS
MAX.BRANCHCIRCUITFUSESIZE
MIN.BRANCHCIRCUITAMP
ACITY
DESIGNPRESSUREHIGH SIDE
AMPS
AMPS
VOLTS
CORPORATION
SERIALNO
PHASE
SINGLE
CHARGE
LOWSIDE
PARTNO
PSIG
THEUSA
MADEIN
OZ
R
C
R
HZ
U
L
L
NSF
U
H_C1400A/W
H_C1000A/W
NEMA
6-20
NEMA
6-15


1' (0,3m)
1/4" (6,4mm)
H_E1000A/W‡
H_E1400A/W‡
requires 15A circuit,
1.50 mm2wire
requires 20A circuit,
4.00 mm2wire
Site preparation
2.1
Provide drainage, water supply and electrical power to within 6 feet (2m) of ice
machine in accordance with local and national codes. Outdoor installation is
not recommended and will void warranty.
Electrical ➊
• H_C1000(A/W)HS 208-230/60/1-15 amps • H_C1400(A/W)HS 208-230/60/1-20 amps
• H_E1000(A/W)HS 230/50/1-15 amps‡• H_E1400(A/W)HS 230/50/1-20 amps‡
(H_E1000A/W requires 15A circuit, 1.50 mm2wire) (H_E1400A/W requires 20A circuit, 4.00 mm2wire)
‡ Plug must be provided by end user & must conform to standard EN 60 335-2-24 of the end destination.
Potable water supply ➋
• 10-70 psi (69-483kpa)
• 45 to 90 F (7 to 32 C)
• Follett recommends the use of an in-line water ltration system (#00130286)
Condenser water supply for water-cooled systems ➌
• 10 psi min.; 150 psi max. (69kpa min.; 1034kpa max.)
• 45 to 90 F (7 to 32 C)
• 1.5 gallons per minute (5.68 liters per minute)
Drain ➍
• The drain line from the ice machine must have at least 1/4” per foot pitch (6,4mm/0,3m)
Installation site requirements
2.1

6self-contained HARMONY • TOP-MOUNT
Prepare the dispenser. 3
Dispenser preparation
➊
➊
All models
• Remove protective tape from gaskets ➊
Top preparation – ALL
3.1
➋
➊
➊
➌
• Apply gaskets
➊.
• Install coupling
➋ through bottom of
dispenser top and secure with locking nut
➌
Top preparation – ALL
3.2
Note: The instructions below only apply to 22" & 30" wide dispensers.
44" wide dispenser instructions may be found with the top kit.
➋
➊
Cornelius models only
• Remove protective tape ➊
• Apply gasket
➋
Top preparation – CORNELIUS
3.4
➋
➊
• Screw 4" (102mm) extension ➊ into
bottom of shuttle actuator ➋
Top preparation – ALL
3.3

HARMONY • TOP-MOUNT self-contained 7
➊
➋
➋
OFF
ON
Lancer models only
• Remove protective tape ➊
• Apply gaskets
➋
Top preparation – LANCER
3.5
Cornelius models ED, DB, DF, IDC
and Flavor Fusion
Adjust the agitation timer located on the
Cornelius PC board to 1 second on, 1 hour
off. Note: see Cornelius manual for more
information.
Agitation adjust. – CORNELIUS
3.6
12345678
OFF
5
6
7
8
O
O
O
O
O
O
O
X
O
O
X
O
O
O
X
X
O
X
O
O
O
X
O
X
O
X
X
O
O
X
X
X
X
O
O
O
X
O
O
X
X
O
X
O
X
O
X
X
X
X
O
O
X
X
O
X
X
X
X
O
X
X
X
X
3
4O OO XX OX X
No agitation
10 minutes
20 minutes
30 minutes
40 minutes
50 minutes
60 minutes
70 minutes
80 minutes
90 minutes
100 minutes
110 minutes
120 minutes
130 minutes
140 minutes
150 minutes
Switch
Number
O = OFF
X = ON
Agitation Frequency
Agitation Time
1 second
2 seconds
3 seconds
4 seconds
Switch
Number
Press in on
this side to
turn switch
OFF.
Press in on this
side to turn
switch ON.
Rocker Switches
(top view)
Switch ON
Switch
OFF
Side View
Lancer 4500 series only
Adjust the agitation time to 1 second, and the agitation frequency to 150 minutes. See Lancer
manual for more information.
Agitation adjustments – LANCER 4500 SERIES
3.7

8self-contained HARMONY • TOP-MOUNT
Major/Minor
FS-16 Setup
Config Bonus Key
Soda/Plain Water
Config Dispense Only
PC Mode
PC Time
Ice Stir Off
Ice Stir On
Sold Out
Carb Sensors
Ice Bin Sensors
Valve Code Version
Number Of Valves
Reset Defaults No Yes
Reload Defaults?
1 2 3 4
12 0.104 0.104
1000
Ice Bin Optic
Upper Lower
Sold Out #1
Selection Sold Out
05000
On Time (MSEC)
Off On
Set PC Mode Menu
V:1 B1 DLY1
Dispense Delay
V:2 1:S 2:W 3:S 4:W
V:1 T:F M:S B:W
Bonus Key Setup
Brands Per Side
V:1 L:2 R:1
FS-16 Setup
FS-16 Setup
FS-16 Setup
FS-16 Setup
FS-16 Setup
FS-16 Setup
FS-16 Setup
FS-16 Setup
FS-16 Setup
FS-16 Setup
FS-16 Setup
FS-16 Setup
FS-16 Setup
Soda/Plain Water
OFF Time (MIN)
00150
On Time (MSEC)
01000
1000 500
34 0.104 0.104
On On On On
V:1 B:1
Sold Out #1
Off
Sold Out #1
Ver. 0.200
Lancer FS-16
Sub-CatagoryMain Menu
Initialization Screen
2nd Sub-Catagory
(Boot Up Only)
Cancel Enter
Scrolls through Main Menu
Press "Enter" to enter sub-catagory
Moves curser to right or left
Changes value (number/letter)
Press "Enter" to enter save changes
Press "Cancel" to exit menu
➊
Lancer FS series only
• Hold down “cancel” and “left button” to get to hidden menu ➊
• Type in code 6655
• Type in 150 minutes of off time and 1000 milliseconds (1 second of time) as the preferred
setting
Note: See Lancer manual for more information
Agitation adjustments – LANCER FS SERIES
3.8
Agitation adjustments – SERVEND
3.9
SerVend models only
No agitation adjustment required.

HARMONY • TOP-MOUNT self-contained 9


flange extends into storage
bin through gate opening
gate restrictor plate
storage bin
gate mounting
plate
ice diverter
(supplied)
apply food-grade silicone sealant to
this surface to seal to bin gate
mounting plate
gasket
ice chute
flat washer
10-32 nut
Cornelius ED, DF and DB series only
These dispensers require the installation of an ice diverter at the dispenser opening.
• Disassemble chute assembly
• Discard factory restrictor plate ➊
• Replace with alternate diverter plate, ➋(supplied)
3.10 Dispenser diverter plate installation – CORNELIUS ED, DF and DB SERIES

10 self-contained HARMONY • TOP-MOUNT
➊
➋
adjust restrictor
plate to fully
open position
Cornelius IDC and Flavor Fusion
These dispensers require the adjustment of the ice restrictor plate.
• Loosen four nuts on ice chute assembly ➊
• Adjust restrictor plate to fully open position ➋
• Replace four nuts and tight to 50 in lbs (max.)
Restrictor plate adjustment – CORNELIUS IDC and FLAVOR FUSION
3.11