Fontaine S-2612 User manual

INSTALLATION MANUAL
Shower Panel S-2612
2 PERSONS REQUIRED
1000
2000

Please keep this manual and product code number for further reference and for ordering
replacement parts if necessary.
IMPORTANT
GENERAL INSTRUCTIONS
Read this manual carefully and completely before proceeding.
This installation requires 2 people to safely handle and install.
It is recommended that you wear safety glasses at all times during the installation.
Take care with the transportation and handling of toughened safety glass as it is designed to shatter
into small pieces in order to avoid injury.
INSTALLATION
Esnure your room is fully completed (all finishes and fittings including tiles etc) and that the location of
the screen is straight and plumb. Silicone sealant should be used to seal the gap where the ceramic
tiles meet the fixed panel.
NOTE:
Caulking: no sealant is required inside the shower, unless otherwise stated.
CARE FOR YOUR SHOWER
To clean, wipe glass and frame with mild soap diluted in water.
Avoid using harsh chemicals and cleaning utensils on frame and glass.
To reduce cleaning time, we recommend wiping the glass panels with a squeegee after each use
All of our shower screens and panels are manufactured to the Australian standards code
AS/NZS 2208:1996 Safety glazing materials in buildings. In order to meet installation
Australian Safety Standards, be able to receive your Certificate of Occupancy, and to
maintain your product warranty; toughened safety glass must be installed by a licensed
glazier.
Product specifications are subject to change without notice

6mm & 3 m m(1/4" & 1/8" )
D R IL L B IT S
S IL I C O N E MA L L E T
S P IR I T L E V E L P O W E R DR IL L
TA P E ME A S U R E S C R E W DR IV E R H A C K S AW S A F E T Y G L A S S E S
* Use a6 m m (¼" )drill bit for ceramic when drilling into ceramic tiles
P E N C I L
900
2000
TOOLS REQUIRED
PLAN YOUR PLACEMENT

I T E M P A R T S D I A G R A M Q T Y
01 3
02 3
03 1
F i x e d g la s s
04 1
05 1
W a ll p lu g
S c r e w S T 4 x 3 0
W a l l p r o fi le
S e a l in g s tr ip
01
02
03
04
05
PARTS LISTING

2
1
3/8"
10mm

4
3
HOURS
24