FONTANA SENSOR FAUCETS FS9801G User manual

Plumbers Tape Tape Measure Adjustable Wrench
Screwdriver
Drill
Hex Wrench
Level
Pencil or MarkerThread Sealant
*not included
POSSIBLE TOOLS REQUIRED*
Before you begin, please read the installation instructions below. Observe
all local building and safety codes.
Unpack and inspect the items for any shipping damages. If you find
damages, do not install.
Please note all products must be installed by a professional and certified
plumber otherwise warranty might be voided.
BEFORE YOU BEGIN
Product code: FS9801G
Fontana Sensor Faucets©
Fontana Sensor Faucet Customer Service: 800-684-4489
fontanasensorfaucets.com
1
FONTANA LENOX AUTOMATIC SOAP DISPENSER
COMMERCIAL GOLD WALL MOUNT AUTOMATIC FOAM
AUTO SOAP DISPENSER INSTALLATION INSTRUCTIONS

ǶǶƮǞǿƵȁȺǞȌȁȺƊȁƮȺȯƵƧǞ˛ƧƊɈǞȌȁȺƊȲƵȁȌǿǞȁƊǶƊȁƮǿay vary. Use actual products for accuracy in critical situations.
Wall Mount Installation
Soap Tube
Sensor Cable
1.
3. 4.
2.
Size
Soap volume: <2m/time (Four gear)
²ȯƵƧǞ˛ƧƊɈǞȌȁ
Product Type: Commercial
Main Construction Material: Brass
Mount Type: Deck
Handle Type: Infra-Red
Power Rating: DC: 6V (4x 1.5VAA alkaline battery) AC:220V
Batteries Required: 4 AA Batteries (not supplied)
Number of Tap Holes: 1
Valve/Cartridge Type: Solenoid Valve
Plumbing System Requirements: Suitable for all plumbing systems
Sensing Range: 15 _ 3cm
Activation Time: 0.5 - 1 secs
Viscosity of Liquid Soap: 100-3500cp (mpA .s)
3”
8”
Fontana Sensor Faucets©
Fontana Sensor Faucet Customer Service: 800-684-4489
fontanasensorfaucets.com
2
+

Installation Method
Insert the locking
plate into bracket
Insert the pump
onto the bracket
Install the bracket
on the wall
²ȌƊȯªƵ˛ǶǶ§ȲȌƧƵȺȺ
Ǐ˛ɮɈǘƵƦȌɈɈǶƵɩǞɈǘ
full soap onto the pump,
and do not over tighten.
Add soap into
the empty bottle.
SO AP
Unscrew the
empty bottle.
Fontana Sensor Faucets©
Fontana Sensor Faucet Customer Service: 800-684-4489
fontanasensorfaucets.com
3

ƊɈɈƵȲɯ Ȍɮ
(ƵƧDzwȌɐȁɈƵƮIƊɐƧƵɈ
ȌȲ
ȌȲ
－
＋
Screws
Batteries
Battery
case cover
Battery
case
＋
－
Fontana Sensor Faucets©
Fontana Sensor Faucet Customer Service: 800-684-4489
fontanasensorfaucets.com
4

PUSH!
Caution!
PUSH!
When the soap bottle is
˛ǶǶƵƮɩǞɈǘȺȌƊȯةȯȲƵȺȺɈǘƵƦɐɈɈȌȁ
till soap dispenses out of nozzle.
Do not use the sensor when the button is pressed,
because they cannot be used at the same time,
as it might lead to the damage to the machine.
ÇȺƊǐƵȌǏ ɐɈɈȌȁ
Place hands immediately
under soap spout.
Predetermined amount
of soap will dispense
If more soap is needed,
remove hands & repeat.
Usage
1. Remove cover of battery case.
2. Install four (4) D size alkaline batteries.
Note: Make sure the batteries are installed in correct orientation (polarity).
3. Replace battery case cover.
4. Tighten screws.
- The standard life cycle time is 2 years, based on average use 2000 times/month.
Anode Cathode
Fontana Sensor Faucets©
Fontana Sensor Faucet Customer Service: 800-684-4489
fontanasensorfaucets.com
5

Commissioning Sequence
Before using the soap dispenser for the first time the
following sequence must be carried out.
Fill the bottle full of soap.
Locate the dispense button on the side of the pump.
Press and hold the button until soap is dispensed
from the spout. This will ensure the dispenser tube
and cable are full of soap.
Operation
Place the hands under the spout within the sensing
range.
Once the users' hands have been detected a small
amount of soap will be dispensed from the spout
into the users' hands.
General Information
Our sensor soap dispensers have a non-touch
control which uses infrared sensing technology to
detect human presence. Once detected, the spout
instantly dispenses soap and automatically stops
once the user moves their hands away to eliminate
unnecessary wastage, whilst creating a more
hygienic washroom solution.
All products manufactured and supplied by Fontana
are safe and comply to legislative requirements.
Providing they are installed correctly and receive
regular maintenance in accordance with these
instructions your user experience will not be
affected.
Incorrect Installation
Keep sensor range adjustment
within 4 inches away from center
of spout. This can only be done
with optional remote control.
Installing electronic soap dispenser
& faucet with intersecting centerline
might lead to accidental activation
of either or both.
Faucet FaucetSoap
Dispenser
Soap
Dispenser
Correct Installation
Keep sensor ranges
factory preset.
Keep soap spout & faucet
centerlin parallel.
Faucet Faucet
Soap
Dispenser
Soap
Dispenser
Sensor Faucet & Soap Dispneser Installation
Care & Cleaning
• Wipe away any debris adhering to the spout or
sensor.
• Wipe away debris with a damp cloth containing a
suitable amount of a neutral, dishwashing
detergent. Then wipe clean with a damp cloth.
• When cleaning around the sensor, please be
careful not to scratch the surface of the sensor
window.
• Do not use detergent that might damage the
surface of spout. These include:
• Detergents containing acid, chlorine bleach or
alkali.
• Detergents that are coarse granules in nature, such
as polishing powder.
• Solvents such as paint thinner or benzene.
• Abrasive aids such as nylon scrubbers/brushes,
steel wool, etc.
Hygienic
The proximity sensor removes the need to touch the
spout body, reducing the spread of germs and
reducing the chance of cross infection.
For more details, visit the product page:
Fontana Sensor Faucets©
Fontana Sensor Faucet Customer Service: 800-684-4489
fontanasensorfaucets.com
6