ScentAir ScentWave 1004 User manual

ScentWave 1004 Troubleshooting Guide Tier #1
Q: How do I adjust the fragrance level? (Smell is too strong or too weak)
A: Use the “+” (plus) and “-“ (minus) buttons to adjust to your desired fragrance level.
Q: How do I adjust the time?
A: 1) Press the “Clock” button.
2) Screen will display the time.
3) Press and hold “Clock” button for 2 seconds.
4) Hours will be flashing. Use “+” (plus) and “-“ (minus) buttons to adjust the hours.
5) Press the “Next Digit” button. Minutes will be flashing, use to adjust
minutes.
6) Press the “check” button to confirm and return to main screeen.
Q: How do I adjust the date?
A: 1) Press the “Clock” button twice.
2) Screen will display the date.
3) Press and hold “Clock” button for 2 seconds.
4) The year will be flashing. Use “+” (plus) and “-“ (minus) buttons to adjust the year.
5) Press the “Next Digit” button. The month will be flashing, use to adjust
month.
6) Press the “Next Digit” button. The day will be flashing, use to adjust
days.
7) Press the “check” button to confirm and return to main screeen.

Q: How do I create an event?
A: 1) Press the “Event Settings” button. “On”time hours will be flashing.
2) Use “+” (plus) and “-“ (minus) buttons to adjust the hours.
5) Press the “Next Digit” button. The minutes will be flashing, use
to adjust the minutes.
6) Press the “Next Digit” button. The days of the week will be flashing, use
to adjust.
7) A schedule of “days of the week” is provided in your user manual.
8) Press the “Next Digit” button
or the “Event Settings” button.
The screen will change to the Off Time. Signified by the “OFF”.
9) Repeat Steps 2 -5.
10) Press “Check” to return to
the home screen, or “Event Settings”
to Create additional events.
Q: How do I delete an Event?
A: 1) Press and hold the “Event Settings” button until the event to be deleted is displayed.
2) Press and hold the “Clock” button for 3 seconds.
3) Screen will flash and return to next empty event slot.

Q: How do I get my machine out of “Run” or “Pause” Setting?
A: 1A) If machine is in “Run” Mode. Push both clock and check at same time.
1B) If machine is in “Pause” Mode, Push both clock and check buttons at the same time twice.
2) Machine should now be in “Scent Event” Mode, and will run per event settings.
Q: How do I secure my machine?
A: 1) Press and hold the “Next Digit” Button for 3 seconds.
2) The Lockcode screen will appear with the first digit flashing.
3) Your Lockcode is “4321”.
4) Use the “+” (Plus) and “-“ (Minus) buttons to change the digit.
5) Use the “Next Digit” Button to proceed to the next digit.
6) Use the “Check” Button to proceed to confirm the code and return to the home screen.
Q: How do I exit “Code” Mode?
A: Follow the same procedure outlined in Answer to “How do I secure my machine?”
2