FOR-A FORA O2 User manual

Spacer Clips Function Description
Larger Smaller
Loose Tight
5.
6.
Top
deeper shallower shallower deeper
Spacer clips adjustment: The deeper the insertion, the larger the oximeter opening
and the looser on the ngers; the shallower the insertion, the smaller the opening
and the tighter on the ngers. Please adjust according to personal comfort.
Note: If placed too shallow, the spacer clips will slip out of the oximeter. After detecting the pulse signal, the oximeter will display the reading. The readings
will be updated based on the signal received with each pulse.
Make sure your nger reaches the "Top".
Press the power button to measure blood oxygen concentration and pulse rate.
Comfort Band & Spacer Clips
Quick Start Guide
315-8255200-001
FORA O2

2.
3.
4.
A.
COMFORT BAND
Comfort Band & Spacer Clips Installation
1.
SPACER CLIPS
Narrow
Broad
Clasp the comfort band at the top of the oximeter. Refer to "A."
Put your nger in the oximeter.
Wrap the strap around your nger and bind the strap to the band.
Note: Bind the strap according to personal comfort. Ensure that the strap is not too
loose to avoid meter displacement, which will result in inaccurate results.
Unfasten the strap and align it with the oximeter.
Open the clamp and place the spacer clips on the left and right sides.
Note: The broadside of the spacer clip is placed inside the oximeter opening.