for Living 088-1899-8 User manual

Assembly Instructions
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
NEED HELP? GIVE US A CALL!
WE’RE HERE FOR YOU.
TOLL-FREE:
1-877-483-6759
For Living
Hanging Lounger
Product No. 088-1899-8

From your first apartment to
downsizing your family home,
For Living is a great place to start.
Uncomplicate your life with timeless
style and reliable quality that
delivers everyday solutions for your
home.
Let us know how our products
work for you. Rate and review at
canadiantire.ca

3
Table of Contents
Needed for Assembly:
FOR LIVING HANGING LOUNGER
Caring For Your Item 19
Warranty 20
Parts List 4
Step-by-step Guide 9
2 people
Warning! Please use your furniture correctly and safely. Improper use
can cause safety hazards, or damage to your furniture or household
items. Carefully read the following safety information.
• Maximum Weight: 250 lb (113.4 kg)
• Please read and understand this entire manual before attempting to assemble,
operate, or install the product.
• Any assembly or maintenance of the product must be carried out by adults only.
• Some parts may contain sharp edges. Wear protective gloves if necessary.
• To prevent damage, place all parts on a level surface during assembly.
Add a layer of protective surface if needed.
• Due to the nature of steel, surface oxidation (rusting) will occur if this protective coating is
scratched. This is a natural process. To minimize this condition, it is recommended that care
be taken when assembling and handling the product in order to prevent the paint from
being scratched.
• For easy assembly, do not completely tighten bolts into the frame until all bolts have been
inserted for that phase of assembly. Only at the final step of assembly, securely tighten all
bolts and hardware.

4
Parts List
Item Description Thumbnail Quantity
2
7
Lower Hanging Bar
Left Back Frame Tube
1
1
3
8
Leg Tube
Right Back Frame Tube
4
1
4
9
Front Seat Tube
Back Support Tube
1
1
5
10
12
Left Seat Tube
Armrest
Cushion
1
2
1
6
11
13
Right Seat Tube
Sling Seat
Top Support
1
1
1
1 Upper Hanging Bar 1
FOR LIVING HANGING LOUNGER

5
Parts List
Item Description Thumbnail Quantity
15 Canopy 1
16 Hook Cover 1
14 Top Tube 4
FOR LIVING HANGING LOUNGER

6
Exploded Parts
FOR LIVING HANGING LOUNGER
15
14
14
13
16
N
M
12 8
10
6
43
3
3
5
2
11
3
10
79
1

7
Hardware List
Item Description Thumbnail Quantity
I M6 Screw Cover 8
J M8 Washer 4
L M8 Screw Cover 4
K
M
M8 Nut
Hanging Panel
4
1
FOR LIVING HANGING LOUNGER
A
E
M8x90 Combination
Bolt and Washer
M6x55 Combination
Bolt and Washer
2
4
B
F
M8x65 Combination
Bolt and Washer
M6x15 Combination
Bolt and Washer
1
2
D
H
M6x70 Combination
Bolt and Washer
M6 Nut
4
8
C
G
M8x60 Bolt
M6 Washer
2
8

8
Hardware List
Item Description Thumbnail Quantity
FOR LIVING HANGING LOUNGER
N Hook 1
O Hex Key 1
P Wrench 1

9
Step-by-step Guide
E
O
X4
X1
G
P
X4
X1
3
I
X4
X4
2
H
X1
X4
FOR LIVING HANGING LOUNGER
Step 1
1. Insert the leg tube (3) into lower hanging bar (2), using
M6x55 combination bolt and washer (E), M6 washer (G),
M6 nut (H), tighten all bolts using the hex key (O) and
wrench (P).
2. Add M6 screw cover (I) as shown.
2
2
3
3
E
G
H
I
3
3
3
Note:
Do not completely tighten.

10
1
K
X1
X2
L
C
O
X2
X1
J
P
X2
X1
X2
FOR LIVING HANGING LOUNGER
Step 2
1. Connect the upper hanging bar (1) and lower hanging bar
(2) by using M8x60 bolt (C), M8 washer (J), M8 nut (K),
tighten all bolts using the hex key (O) and wrench (P).
2. Add M8 screw cover (L) as shown.
L
1
2
JK
C
Note:
Do not completely tighten.
Step-by-step Guide

11
Step-by-step Guide
FOR LIVING HANGING LOUNGER
Step 3
1. Insert left back frame tube (7) and right back frame tube
(8) to the sling seat (11), then insert left seat tube (5) to left
back frame tube (7) through sling seat (11)and insert right
seat tube (6) to the right back frame tube (8) through sling
seat (11).
2. Insert front seat tube (4) to the left seat tube (5) and
right seat tube (6).
3. Straighten out the sling seat (11)as shown, then secure
the Velcro.
4X1 5X1
7X1
11 X1
6X1
8X1
8
8
7
11
6
5
11
7
11
6
45
11
8
7

12 FOR LIVING HANGING LOUNGER
Step 4
Insert the back support tube (9) to the sling seat (11), lining
up the bolt holes on the back support tube (9) with the
corresponding bolt holes on left back frame tube (7) and
right back frame tube (8). Using M6x15 combination bolt
and washer (F), loosely tighten all bolts using the hex key
(O).
11 F
X1 X2
7 9
O
X1 X1
X1
Note:
Do not completely tighten.
Step-by-step Guide
9
F
7
8
11

13
Step-by-step Guide
FOR LIVING HANGING LOUNGER
Step 5
Using M8X90 combination bolt and washer (A) pass
though left back frame tube (7), hanging panel (M), right
back frame tube (8), M8 washer (J) and M8 nut (K), lightly
tighten all bolts using the hex key (O) and wrench (P).
Tighten all bolts by using the hex key (O) and wrench (P).
Add M8 screw cover (L) as shown below.
KX2
MX1
A
L
X2
X2
J
P
X2
X1
OX1
Note:
Do not completely tighten.
A
M
J
K
L
7
8

14
Step-by-step Guide
FOR LIVING HANGING LOUNGER
Step 6
Attach the armrest (10) to left back frame tube (7) and
right back frame tube (8) by lining up the bolt holes on the
armrest (10) with the corresponding bolt holes on the left
back frame tube (7) and right back frame tube (8). Using
M6x70 combination bolt with washer (D), M6 washer (G)
and M6 nut (H), tighten all bolts using the hex key (O)
and the wrench (P). Add M6 screw cover (I) as shown
below.
10 X2 DX4
GX4 HX4
IX4 OX1
PX1
Note:
Do not completely tighten.
8
7
10
10
I
HG
D
D
G
H
I

15
Step-by-step Guide
FOR LIVING HANGING LOUNGER
Step 7
1. Insert top tube (14)to the top support (13), then
assemble the canopy (15) as shown below.
2. Attach the top support (13) to the upper hanging bar
(1) by lining up the bolt holes on the top support (13)with
the corresponding bolt holes on the upper hanging bar
(1). Using M8x65 combination bolt with washer (B), loosely
tighten all bolts using the hex key (O).
13 X1
15 X1
14
B
O
X4
X1
X1
14
13
14
B
1
15
Note:
Do not completely tighten.

16
Step-by-step Guide
FOR LIVING HANGING LOUNGER
Step 8
Connect hanging panel (M) and upper hanging bar (1) by
using hook (N), add the hook cover (16)in the process.
16 X1
NX1
MX1
1
16
N
M

17
Step-by-step Guide
FOR LIVING HANGING LOUNGER
Step 9
Follow the diagram to open the hook of safety rope under
the sling seat (11). Connect the lower hanging bar (2)
and sling seat (11)by using the hook of safety rope. Then
tighten the hook of safety rope as shown below.
11 11
2
2

18
Step-by-step Guide
FOR LIVING HANGING LOUNGER
Step 10
Place the cushion (12) on the chair, then fasten the strap as
shown below.
12 X1
12

19FOR LIVING HANGING LOUNGER
Caring for your Item
1
4
2
5
3
Always keep children
under close supervision
while they are using or
around this product.
Never leave children
unattended.
Check all nuts and
bolts periodically
for tightness. When
required, tighten them
again.
Do not light any fires
below or near the
product.
This product is
intended for domestic
outdoor use only.
We recommend the
use of furniture covers
when not in use.
(Furniture) Cleaning: Wash frame and wicker parts with mild soap and water, rinse
thoroughly, and dry completely. Do not use bleach, acid, or other solvents on the frame
or wicker parts.
• The cushion may be washed on the surface only by using mild soap and water or
commercial foaming upholstery cleaner if necessary. If washed, rinse well and hang to dry.
Do not machine wash or dry.
Off Season: Clean and dry before storing in a dry, sheltered area.

20
Warranty
FOR LIVING HANGING LOUNGER
This For Living ®product carries a one (1) year warranty against defects in workmanship and
materials. Trileaf Distribution agrees to replace the defective product free of charge within
the stated warranty period, when returned by the original purchaser with proof of purchase.
This product is not guaranteed against wear or breakage due to misuse and/or abuse.
Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
Model No. 088-1899-8
1-Year Limited Warranty*