Forever Redwood ROUND WOOD PICNIC TABLE WITH WHEELS User manual

ASSEMBLY INSTRUCTIONS FOR THE
ROUND WOOD PICNIC TABLE
WITH WHEELS
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
ROUND WOOD PICNIC TABLE WITH WHEELS
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
4
5
Drawing
Description
Tabletop
Legs with Wheels
Legs
Support
Diagonal Supports
Qty.
1
2
2
1
2
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
ROUND WOOD PICNIC TABLE WITH WHEELS
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
Drawing
Description
5/16´´ X 3 ½´´ Bolts
(To attach the legs to the tabletop. / To
attach the support to the legs. / To attach
the diagonal supports to the tabletop and to
the leg).
5/16´´ X 2´´ Bolts
(To attach the les together).
Note: Dimensions of your hardware will vary depending on size.

P| 3
ROUND WOOD PICNIC TABLE WITH WHEELS
www.ForeverRedwood.com
No
1
2
3
4
5
DESCRIPTION
Tabletop
Legs with Wheels
Legs
Support
Diagonal Supports
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.
4
2
2
1
5
3
3
5

P| 4
ROUND WOOD PICNIC TABLE WITH WHEELS
www.ForeverRedwood.com
Step 1: Place the Tabletop (1) upside down. After that, use 5/16´´ x 3 ½´´ bolts (A) to attach the legs with wheels (2) to the
tabletop. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Step 2: Attach the other legs (3) to the tabletop with 5/16’’ x 3 ½’’ bolts (A). The legs will be attached together with 5/16”x 2”
bolts (B). Each part has a series of numbers that indicate where to attach the part with the corresponding number.
1
2
2
3
3
5/16´´ X 3 ½´´ Bolts
5/16´´ X 3 ½´´ Bolts
5/16´´ X 2´´ Bolts

P| 5
ROUND WOOD PICNIC TABLE WITH WHEELS
www.ForeverRedwood.com
Step 3: Attach the support (4) to the legs with 5/16’’ x 3 ½’’ bolts (A). Each part has a series of numbers that indicate where to
attach the part with the corresponding number.
Step 4: Use 5/16’’ x 3 ½’’ bolts (A) to attach the diagonal supports (5) to the tabletop and to the legs. Each part has a series of
numbers that indicate where to attach the part with the corresponding number
4
5/16´´ X 3 ½´´ Bolts
5/16´´ X 3 ½´´ Bolts
5
5

P| 6
ROUND WOOD PICNIC TABLE WITH WHEELS
www.ForeverRedwood.com
Step 5: Finally, turn the table over its feet.
This completes the Table assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't
hesitate to call us (866 332 2403) or email us. We are here to support you.