Breezesta fiberon Furniture FIB-AD-0115 User manual

Chill Contemporary Adirondack
FIB-AD-0115

2FIB-AD-0115 Assembly 5/21
Chill Contemporary Adirondack Furniture Parts
Part Description Part Number Quantity
ALe Front Leg PRT-00056 1
BRight Front Leg PRT-00058 1
CUnder Arm Support PRT-00057 2
DLe Arm Assembly SA-00020 1
ERight Arm Assembly SA-00331 1
FAdirondack Spreader SS-22.187 1
GBase Assembly SA-00019 1
HBack Assembly SA-00022 1
Chill Contemporary Adirondack Hardware Parts
Part Description Part Number Quantity
a#8 x 1- in. Torx Screw H-0000-S815 4
b#8 x 2 in. Torx Screw H-0000-S82 4
cDouble Screw H-0000-DS 2
d5/16 in. x 1- in. Chair Bolt H-0000-CB51615 6
eT20 and T25 Torx Bit H-0000-CTD 1
AB
C
F
D
G
EH
Suggested Tools
Drill
Plastic Mallet
Please read entire instructions before beginning.
a c edb

3FIB-AD-0115 Assembly 5/21
1. Attach Le Front Leg Ato Le Arm Assembly Dby inserting Hardware c into the pre-drilled holes and
rotating Le Front Leg Aclockwise, stopping when the assembly is tight in the orientation shown.
2. Connect Under Arm Support Cto the assembly using
Hardware aand bas shown.
3. Repeat steps 1 and 2 with Right Front Leg B, Under
Arm Support Cand Right Arm Assembly E.
4. Attach Adirondack Spreader Fto the previous
assemblies using Hardware a.
c
D
C
a
b
F
A
a x 2

4FIB-AD-0115 Assembly 5/21
d x 4
d x 2
b x 2
G
H
5. Place Base Assembly Gbetween the previous
assemblies and connect it with Hardware d.
6. Slide Back Assembly Hinto the assembly and
attach it with Hardware b.
©2021 Fiberon. All rights reserved. FIBERON and the Fiberon logo are trademarks of Fiber Composites, LLC. Registered trademarks are registered in the U.S. and may be registered internationally.