Forest garden TPCS88 User manual

CORNER SHED
8"x8" TPCS88
Issue 0118
Forest Garden Ltd | Unit 288 | Oak Drive | Hartlebury Trading Estate | Hartlebury | Worcestershire | Dy10 4JB

INFORMATION
This building is pressure treated to ensure longevity of all timber components and to protect against rot. This may leave a colour difference on some parts that will even out as the moisture
content stabilises. This will not need additional treatment.
- This product must be built on a solid level base.
- The roof of this building is not a load bearing structure.
- Please keep all plastic bags and small parts away from children
- Timber is a natural material. It will shrink and swell as a result of varying moisture content.
- Due to the nature of the material the doors may need some trimming for a neater fit.
Technical Help line: 0333 7777 089 8.30 am and 5.00 pm Monday to Friday.
Please check all parts prior to assembly
Assembly of damaged parts may be deemed to be acceptance and this may affect the remedies you are entitled to.
If the product is not constructed in accordance with the instructions, or is altered in any way (e.g. painted), the manufacturer cannot be held liable for any resulting damage
This article contains biocidal products to give protection against wood destroying insects & wood rotting fungi. Contents may vary.
May contain : Basic copper carbonate (Copper (II) carbonate – Copper (II) hydroxide (1:1), Cupric oxide, Copper hydroxide carbonate, oxyethyl, ammoniumpropionate, Copper HDO,
Propiconazole, Tebuconazole, Boric acid, Benzalkonium chloride.
Wear gloves when handling freshly treated wood. Avoid breathing dust when cutting treated or untreated wood. Dispose of off-cuts responsibly – do not burn.
Panel 1 (Floor)
Size: 2316x1460
Qty: 1
CS88BFL1
Panel 2 (Floor)
Size: 2326x856
Qty: 1
CS88BFL2
Panel 3 (Right Back)
Size: 2260x1929mm
Qty: 1
TPCS88RHP
Panel 4 (Left Back)
Size: 2260x1929mm
Qty: 1
TPCS88LHP
Panel 5 (Window)
Size: 1460x1930mm
Qty: 2
TPCS88WP
Panel 6 (Front)
Size: 1170x1930mm
Qty: 1
TPCS77DP
Panel 7 (Roof 1)
Size: 2430x928mm
Qty: 1
243009288TRI
Panel 8 (Roof 2)
Size: 2430x1502mm
Qty: 1
243015028TRI
Door Panel (Door)
Size: 456x1820mm
Qty: 2
TPCSDR
Important : Assembly
of this shed requires a
minimum of two adults.
NO
Screws
Panel 1 (Floor)
Size: 2316x1460mm
Panel 2 (Floor)
Size: 2326x856mm
PLACE
IN
LOCATION
MUS T P RE DRI LL
Batten 7 (Back Batten)
Size: 28x28x1829mm
Panel 3 (Right Back)
Size: 2260x1929mm
3x
50mm
Screws
Step 1 Step 2
INSTRUCTIONS
Batten 6 ( Far Back Cover)
Size: 28x12x1839mm
Qty: 1
40121839PPT
Batten 7 (Back Batten)
Size: 28x28x1829mm
Qty: 1
28281829PPT
Batten 2 (Roof Support)
Size: 45x45x2260mm
Qty: 2
45452260P
Batten 8 (Door)
Size: 45x28x1763mm
Qty: 1
45281763P
Batten 1 (Roof Joint 3)
Size: 28x28x2370mm
Qty: 1
28282370P
Pozi Drive Screwdriver
Tools needed (Not supplied)
Sharp KnifeTape Measure
HammerDrill
Batten 14 (Door Stop)
Size: 28x12x928mm
Qty: 1
28120928PPT
Batten 10 (Roof Joint 1)
Size: 28x28x1540mm
Qty: 2
28281540P
Batten 9 (Roof Side Cover)
Size: 90x12x1560mm
Qty: 2
90121560PPT
Batten 12 (Roof Front Cover)
Size: 90x12x1265mm
Qty: 1
90121265PPT
Batten 15 (Roof Joint 2)
Size: 28x28x896mm
Qty: 1
28280896P
Batten 11 (Roof Joint 4)
Size: 28x28x1474mm
Qty: 1
28281474P
Batten 13 (Roof Joint 5)
Size: 28x28x1230mm
Qty: 1
28281230P
Batten 4 (Front Cover)
Size: 40x12x1915mm
Qty: 2
40121915PPT
Batten 3 (Angled)
Size: 32x32x1930mm
Qty: 2
32321930SPT
Batten 5 (Back Cover)
Size: 40x12x1915mm
Qty: 2
40121915PPT
Batten 0 (Roof Back Cover)
Size: 90x12x2398mm
Qty: 2
90122398PPT
Batten 6B ( Far Back Cover)
Size: 40x12x1839mm
Qty: 1
28121839PPT
Fixing Pack: TPCS88FP
Flush Hinge
Qty 4
Turn Button
Qty 3
40mm Screw Qty 14
Felt
Tacks
Qty 80
50mm Screw Qty 26
20mm Screw Qty 38
‘T’ Hinge
Qty 6
60mm Screw Qty 3
Panel Pins Qty 24
30mm Screw Qty 91
Casement Stay
Qty 2
‘Z’ Bracket
Qty 4
Rimlock with
Striking Plate
Qty 1
Door Handle
Set with Pin
Qty 1
25mm Screw Qty 51
Door Block (Door)
Size: 97x150x20mm
Qty: 1
97200150PT
Window Frame (Window)
Size: 574x695mm
Qty: 2
MTGWIN
Felt Roll (Felt)
Size: 10.5m
Qty: 1
Window Glaze (Window)
Size: 623x502mm
Qty: 2
XT623502
Batten 16 (Window 1)
Size: 15x12x629mm
Qty: 4
15120629PAII45PT
Batten 18 (Window 2)
Size: 15x12x508mm
Qty: 4
15120508PAII45PT
Batten 17 (Window Sill)
Size: 45x28x556mm
Qty: 2
45280556PT

SCREW MUST GO
TROUGH FLOOR PANEL
AND INTO THE BATTENS
OF FLOOR PANEL
OVER-
LAPPING
Panel 5 (Window)
Size: 1460x1930mm
OVER-
LAPPING
SIDE
BACK
Step 3
Step 4
DETAIL B
B
DETAIL A
FINAL OUTCOME
MUST PRE DRILL
Step 5 Step 6
Outside
Inside
40mm
Screw
Into
Batten
3x
40mm
Screws
Into
Batten
Into
Panel
Into
Panel
3x
40mm
Screws
MUS T P RE DRI LL
MUS T P RE DRI LL
Batten 3 (Angled)
Size: 32x32x1930mm
Panel 6 (Front)
Size: 1170x1930mm
Batten 3 (Angled)
Size: 32x32x1930mm
SCREW MUST GO TROUGH FLOOR PANEL
AND INTO THE BATTENS OF FLOOR PANEL
MUS T P RE DRI LL
A
2x
50mm
Screws
Into
Floor
3x
50mm
Screws
Connect
Walls
3x
50mm
Screws
Connect
Walls
Panel 4 (Left Back)
Size: 2260x1929mm
2x
50mm
Screws
Into
Floor
3x
50mm
Screws Connect
Walls
2x
50mm
Screws
Into
Floor
2x
50mm
Screws
Into
Floor
3x
50mm
Screws
Connect
Walls
3x
50mm
Screws
Connect
Walls
2x
50mm
Screws
Into
Floor
2x
50mm
Screws
Into
Floor
3x
40mm
Screws
Connect
Walls
3x
40mm
Screws
Connect
Walls
INSIDE VIEW
Panel 5 (Window)
Size: 1460x1930mm
Panel 5 (Window)
Size: 1460x1930mm

Step 7
Step 8 Step 9
Step 10
Batten 5 (Back Cover)
Size: 44x16x1915mm
Batten 6 (Far Back Cover)
Size: 28x12x1839mm
Batten 5 (Back Cover)
Size: 44x16x1915mm
Batten 6B (Far Back Cover)
Size: 40x12x1839mm
Batten 4 (Front Cover)
Size: 40x12x1915mm
Batten 4 (Front Cover)
Size: 40x12x1915mm
Batten 2 (Roof Support)
Size: 45x45x2260mm
1x
30mm
Screws
1x
30mm
Screws
‘Z’
Bracket
‘Z’
Bracket
1x
30mm
Screws
1x
30mm
Screws
1x
30mm
Screws
1x
30mm
Screws
x2
3x
30mm
Screws
NOTE
GAP
Batten 15 (Roof Joint 2)
Size: 28x28x896mm
Batten 10 (Roof Joint 1)
Size: 28x28x1540mm
Batten 13 (Roof Joint 5)
Size: 28x28x1230mm
Panel 7 (Roof 1)
Size: 2430x928mm
3x
30mm
Screws
3x
30mm
Screws
MUS T P RE DRI LL
OVER
HANG
PLEASE NOTE
ORIENTATION
NOTCH
DETAIL E
E
E
DETAIL F
F
Batten 10 (Roof Joint 1)
Size: 28x28x1540mm
Batten 1 (Roof Joint 3)
Size: 28x28x2370mm
Batten 11 (Roof Joint 4)
Size: 28x28x1474mm
Panel 8 (Roof 2)
Size: 2430x1502mm
3x
30mm
Screws
3x
30mm
Screws
4x
30mm
Screws
MUS T P RE DRI LL
3x
30mm
Screws
3x
30mm
Screws
3x
30mm
Screws
3x
30mm
Screws
3x
30mm
Screws
3x
30mm
Screws
MUS T P RE DRI LL
MUS T P RE DRI LL

Step 11 Step 12
Through
Roof Panel
Into
Overhang
Step 13
1000
mm
Attention
Take care when cutting and
trimming the roof felt.
Use Sharp Knife
and
Tape Measure
FOLD
CORNER
TACK
TRIM
OVER
HANG
Step 14 Step 15
Felt Roll (Felt)
Size: 10.5m
Qty: 1
DETAIL G
MUS T P RE DRI LL
DETAIL F
F
HALF
ON
BATTEN
G
3700
mm
1000
mm
1000
mm
1000
mm
500
mm
2600
mm
Felt
Tacks
x50
OVER-
LAP
FELT
Batten 9 (Roof Side Cover)
Size: 90x12x1560mm
Batten 12 (Roof Front Cover)
Size: 90x12x1265mm
Batten 9 (Roof Side Cover)
Size: 90x12x1560mm
2x
40mm
Screws
Batten 14 (Door Stop)
Size: 28x12x928mm
2x
30mm
Screws
INTO
ROOF
BATTEN
2x
30mm
Screws
INTO
ROOF
BATTEN
4x
30mm
Screws
3x
30mm
Screws
3x
30mm
Screws
2x
30mm
Screws
INTO
ROOF
BATTEN
3x
30mm
Screws
3x
30mm
Screws
3x
30mm
Screws
1x
30mm
Screws
Batten 0 (Roof Back Cover)
Size: 90x12x2398mm
Batten 0 (Roof Back Cover)
Size: 90x12x2398mm
INTO
TOP
OF THE
FRAME
MUS T P RE DRI LL
MUS T P RE DRI LL
MUS T P RE DRI LL
3x
30mm
Screws
3x
30mm
Screws
3x
30mm
Screws
4x
30mm
Screws
4x
30mm
Screws

Step 16 Step 17Step 16 Step 17
3x
20mm
Screws
3x
20mm
Screws
3x
20mm
Screws
3x
20mm
Screws
Flush
Hinge
Flush
Hinge
50mm 50mm
12x
Panel
Pins
3
Each
Batten
Both
Windows
1x
50mm
Screws
1x
50mm
Screws
3x
20mm
Screws
3x
20mm
Screws
3x
20mm
Screws
3x
20mm
Screws
3x
20mm
Screws
3x
20mm
Screws
3x
20mm
Screws
3x
20mm
Screws
Flush
Hinge
Into
Hinge
2x
20mm
Screws
2x
20mm
Screws
2x
20mm
Screws
Casement
Stay
INSIDE VIEW
Over
Hang
Window Frame (Window)
Size: 574x695mm
Window Glaze (Window)
Size: 502x623mm
Batten 18 (Window 2)
Size: 15x12x508mm
Batten 18 (Window 1)
Size: 15x12x629mm
Batten 16 (Window 1)
Size: 15x12x629mm
Batten 16 (Window 2)
Size: 15x12x508mm
Batten 17 (Window Sill)
Size: 45x28x556mm
Step 18 Step 19
Step 20 Step 21
4x
25mm
Screws
3x
60mm
Screws
DRILL 20mm HO LE
PIN
DRILL 20mm HO LE DRILL 25x10mm HO LE
RIM-
LOCK
HANDLE
FRONT
3x
25mm
Screws
2x
25mm
Screws
HANDLE
escut-
cheon
4x
25mm
Screws
3x
25mm
Screws
3x
25mm
Screws
3x
25mm
Screws
4x
25mm
Screws
4x
25mm
Screws
Door Panel (Door)
Size: 456x1820mm
Door Panel (Door)
Size: 456x1820mm
Batten 8 (Door)
Size: 45x28x1763mm
Door Block (Door)
Size: 97x150x20mm HINGE
HINGE
HINGE
3x
30mm
Screws
STRIKING
PLATE
2x
20mm
Screws
Supplied
With
Rim-lock
1x
30mm
Screws
1x
30mm
Screws
Turn
Button
Turn
Button
1x
30mm
Screws
Turn
Button
1x
30mm
Screws
Turn
Button