Forest FRA58 User manual

RETREAT
SHED
5"x8" FRA58
Issue: 0119
Forest Garden Ltd | Unit 288 | Oak Drive | Hartlebury Trading Estate | Hartlebury | Worcestershire | Dy10 4JB

NO
Screws
PANEL 1
Size: 1179x1455mm
PANEL 1
Size: 1179x1455mm
PLACE
IN
LOCATION
MUS T PRE DRILL
Step 1 Step 2
INSTRUCTIONS
INFORMATION
This building is pressure treated to ensure longevity of all timber components and to protect against rot. This may leave a colour difference on some parts that will even out as the moisture
content stabilises. This will not need additional treatment.
- This product must be built on a solid level base.
- The roof of this building is not a load bearing structure.
- Please keep all plastic bags and small parts away from children
- Timber is a natural material. It will shrink and swell as a result of varying moisture content.
- Due to the nature of the material the doors may need some trimming for a neater fit.
Technical Help line: 0333 7777 089 8.30 am and 5.00 pm Monday to Friday.
Please check all parts prior to assembly
Assembly of damaged parts may be deemed to be acceptance and this may affect the remedies you are entitled to.
If the product is not constructed in accordance with the instructions, or is altered in any way (e.g. painted), the manufacturer cannot be held liable for any resulting damage
This article contains biocidal products to give protection against wood destroying insects & wood rotting fungi. Contents may vary.
May contain : Basic copper carbonate (Copper (II) carbonate – Copper (II) hydroxide (1:1), Cupric oxide, Copper hydroxide carbonate, oxyethyl, ammoniumpropionate, Copper HDO,
Propiconazole, Tebuconazole, Boric acid, Benzalkonium chloride.
Wear gloves when handling freshly treated wood. Avoid breathing dust when cutting treated or untreated wood. Dispose of off-cuts responsibly – do not burn.
Important : Assembly
of this shed requires a
minimum of two adults.
PANEL 2
Size: 2268x1710mm
PANEL 5
Size: 2393x1455mm
3x
50mm
Screws Connect
Walls
2x
50mm
Screws
Into
Floor
2x
50mm
Screws
Into
Floor
BATTEN 1 (45452548PMPPT)
Size: 45x45x2548mm ANGLED
Qty: 2
BATTEN 2 (70122548PPT)
Size: 70x12x2548mm
Qty: 2
BATTEN 3 (70251680P)
Size: 70x25x1680mm
Qty: 4
BATTEN 4 (121121233PAII45)
Size: 121x12x1233mm ANGLED
Qty: 4
PANEL 1 (TG58FL)
Size: 1179x1455mm
Qty: 2
PANEL 2 (POA8PS)
Size: 2268x1710mm
Qty: 1
PANEL 3 (POA58WS)
Size: 2268x1710mm
Qty: 1
PANEL 4 (POA5DE)
Size: 2393x1455mm
Qty: 1
PANEL 5 (POA5PE)
Size: 2393x1455mm
Qty: 1
PANEL 6(POA58FLH)
Size: 2548x1170mm
Qty: 1
PANEL 7 (POA58FRH)
Size: 2548x1170mm
Qty: 1
Fixing Pack: FRA58FP
Flush Hinge
Qty 4
Door Hinge
Qty 3
Handle Set
Qty 1
Rimlock
Qty 1
Casement Stay
Qty 2
Escutcheon
Qty 1
50mm Screw Qty 40
Shingle Pins Qty 400
20mm Screw Qty 46
40mm Screw Qty 16 30mm Screw Qty 54
Catch Plate
Qty 1
Striking Plate
Qty 1
DOOR (POAD)
Size: 650x1739mm
Qty: 1
WINDOW (POAW)
Size: 244x658mm
Qty: 4
BLOCK (152120100P)
Size: 152x100x12mm
Qty: 1
FINIAL (FIN34914418)
Size: 349x144x18mm
Qty: 2
Pozi Drive Screwdriver
Tools needed (Not supplied)
Tape Measure Hammer Drill
60mm Screw Qty 4
Chisel

PANEL 3
Size: 2268x1710mm
Step 3
Step 4
Step 6 Step 7
SCREW MUST GO TROUGH FLOOR PANEL
AND INTO THE BATTENS OF FLOOR PANEL
MUS T PRE DRILL
INSIDE VIEW
DETAIL A
OVER-
LAPPING
3x
50mm
Screws Connect
Walls
2x
50mm
Screws
Into
Floor
Connect
Walls
3x
50mm
Screws
Connect
Walls
3x
50mm
Screws
2x
50mm
Screws
Into
Floor
A
PANEL 5
Size: 2393x1455mm
PANEL 4
Size: 2393x1455mm
3x
30mm
Screws
3x
30mm
Screws
3x
30mm
Screws
3x
30mm
Screws BATTEN 3
Size: 70x25x1680mm
BATTEN 3
Size: 70x25x1680mm
BATTEN 3
Size: 70x25x1680mm
BATTEN 3
Size: 70x25x1680mm
Step 5
SLIDE
UP
SLIDE
UP
DROPS
INTO PLACE
PANEL 7 (Right)
Size: 2548x1170mm
PANEL 6 (Left)
Size: 2548x1170mm
3x
50mm
Screws
3x
50mm
Screws
INTO
WALLS
3x
50mm
Screws
3x
50mm
Screws
INTO
WALLS
ROOF
CENTRAL
4x
50mm
Screws
4x
50mm
Screws
INTO
ROOF
INTO
ROOF
INTO
WALLS
INTO
WALLS
BATTEN 1
Size: 45x45x2548mm
Check
Side
BATTEN 1
Size: 45x45x2548mm
BATTEN 1
Size: 45x45x2548mm

Step 7
Step 9 Step 10
CEDAR SHINGLES ROOF Nails or staples
should be 19mm
from the edge of the
shingles and 38mm
above the butts of
the course.
Alternative courses
should
not align
4x
30mm
Screws
4x
30mm
Screws
BATTEN 2
Size: 70x12x2548mm
BATTEN 2
Size: 70x12x2548mm
Step 11
2x
40mm
Screws
2x
40mm
Screws
Smaller
Part
3x
20mm
Screws
Smaller
Part
3x
20mm
Screws
HINGE
HINGE
WINDOW (POAW)
Size: 244x658mm
WINDOW (POAW)
Size: 244x658mm
WINDOW (POAW)
Size: 244x658mm
3x
20mm
Screws
3x
20mm
Screws
REPEAT
Step 8
3x
30mm
Screws
3x
30mm
Screws 3x
30mm
Screws
3x
30mm
Screws
BATTEN 4
Size: 121x12x1233mm
BATTEN 4
Size: 121x12x1233mm
BATTEN 4
Size: 121x12x1233mm
BATTEN 4
Size: 121x12x1233mm
May Also be fitted to the
top of the window
Step 11
2x
20mm
Screws
2x
20mm
Screws
2x
20mm
Screws
CASEMENT
STAY
2x
40mm
Screws
2x
40mm
Screws
2x
60mm
Screws
2x
60mm
Screws
2x
40mm
Screws
2x
40mm
Screws
MUST PRE DRILL MUST PRE DRILL
MUS T PRE DRILL
MUS T PRE DRILL
ALTERNATIVE
BE CAREFUL
WHEN
SCREWING IN
WINDOWS TO
NOT SPLIT WOOD

Step 11
Step 12
3x
20mm
Screws
3x
20mm
Screws
3x
20mm
Screws
Smaller
Part
3x
30mm
Screws
Smaller
Part
3x
30mm
Screws
Smaller
Part
3x
30mm
Screws
DRILL
KEY
HOLE
2x
20mm
Screws
Key
Plate
4x
20mm
Screws
BLOCK
Size: 152x100x12mm
4x
40mm
Screws
4x
40mm
Screws
Rim-
Lock
Drill
Recess
35mm Wide
15mm Deep
4x
20mm
Screws
Door
Knob
SHED
Door
3x
30mm
Screws
Flush
Hinge
Door
Flush
Hinge
3x
30mm
Screws
SHED
Step 14
2x
20mm
Screws
CATCH
PLATE
2x
20mm
Screws
STRIKING
PLATE
MUS T PRE DRILL
MUS T PRE DRILL
MUS T PRE DRILL MUS T PRE DRILL
Step 13
FINIAL
Size: 349x155x18mm
FINIAL
Size: 349x155x18mm
2x
30mm
Screws
2x
30mm
Screws
CHISEL
RECESS
CATCH
PLATE
RIMLOCK
NEEDS TO
CATCH ON
PLATE