World Market ASHLYN 516570 User manual

Assembly Instructions
Thank you for your purchase. If you have any questions pertaining to the assembly of this
furniture piece, please contact the nearest World Market store. If you are not near a store,
please call our customer service call center toll free at 877-967-5362 for assistance.
2023.07.20
ALL PRODUCTS SOLD AT WORLD MARKET ARE NOT
FOR COMMERCIAL USE AND ARE INTENDED FOR
RESIDENTIAL USE ONLY.
ASHLYN BOOKSHELF
SKU 516570
PAGE 1

LABEL DESCRIPTION QTY
ATop Panel 1
BVertical Panel 6
CMiddle Panel 1
DBottom Panel 1
EWood Rail 1
FFeet 4
Component List
PICTURE
PAGE 2

LABEL DESCRIPTION QTY
H-1 Cam-bolts 12
H-2 Cam locks 12
H-3 Allen bolts
M6*1-1/2” 12
H-4 Round head wood screw
M3*1-1/2” 4
H-5 26
Hardware List
Wood dowel
Ø8*1-5/8”
PICTURE
PAGE 3

Tool List
T-1 1
Cam lock wrench
T-2 1
Allen wrench
Ø4
LABEL DESCRIPTION QTY
PICTURE
PAGE 4

Assembly Preparation
Before Beginning:
Unpack all hardware bags and components to ensure you have all parts. Take note of bolt
hardware size differences and components that may have directional labels (Example: TOP or
FRONT).
Read the assembly instructions, cover-to-cover. Save any Care and Maintenance
instructions pages for after the assembly has been completed.
It is always recommended to have 2 adults on hand for assembly.
Do not assemble on hard, abrasive flooring or carpeted surfaces that can damage or get caught in
the components during assembly.
Assemble on a clean non-marring surface (such as the product’s packing foam).
Do not discard any packaging until the product has been fully assembled.
In case of missing parts, please contact your nearest World Market store or call our customer
service call center at call 1-877-967-5362.
WARNING: Small parts are a choking hazard. Adult supervision is required before, during,
and after assembly.
PAGE 5

NOTE:Upon opening thoroughly clean all wood surfaces to remove dust and dirt
that may have settled onto finish during shipment. In order to prevent
damage during assembly, please assemble this item with at least two
people.
Turn the cam-bolt screws until they are
tight, the shoulder should be against the
surface of the part.
How to use the cam-tool
NOTE: The arrows on the hidden cam-locks should point to the cam-bolts
SHOULDER
ARROW
H-2
H-1
ARROW
T-1
NOTE:
PAGE 6

Assembly Steps
Step 1
(H-1) Cam bolts x6
(H-2) Cam locks x6
(H-5) Dowels x6
•Assemble the Vertical Panel (B).
•Place Top panel (A) upside down on padded non-marring surface.
•Insert 6x Dowels (H-5) and rotate 6x Cam-Bolts (H-1) into the holes in the Top panel(A).
•Place 6x Cam-Bolts (H-1) into the holes in the Vertical Panel(B) and attach using 6x Cam-
Locks(H-2).
PAGE 7

Step 2
(H-3) Allen bolts x6
Step 3
(H-1) Cam bolts x6
(H-2) Cam locks x6
(H-5) Dowels x6
(H-5) Dowels x6
•Assemble the Vertical Panel (B).
•Insert 6x Dowels (H-5) and rotate 6x Cam-Bolts (H-1) into the holes in the Middle Panel (C).
•Place 6x cam-bolts (H-1) into the holes in the Vertical Panel (B) and attach using 6x Cam-
Locks (H-2).
•Assemble the Middle Panel (C).
•Insert 6x Dowels (H-5) in the Vertical Panel (B).
•Rotate 6x Allen bolts (H-3) into the holes in the Middle Panel (C) by Allen wrench.
PAGE 8

Step 4
(H-3) Allen bolts x6
Step 5
(H-4) Screws x4
(H-5) Dowels x2
(H-5) Dowels x6
•Assemble the Bottom Panel (D).
•Insert 6x Dowels (H-5) in the Vertical Panel (B).
•Rotate 6x Allen bolts (H-3) into the holes in the Bottom Panel (D) by Allen wrench.
•Assemble the Wood Rail (E).
•Insert 2x Dowels (H-5) and rotate 4x Round headwood screws (H-4) into the holes in the Bottom
Panel (D) by Allen wrench.
PAGE 9

Step 6
Step 7
•Assemble the Feet (F).
•Rotate 4x Feet (F) into the holes in the Bottom panel(D).
Rotate 4x Feet(F) into the holes in the Bottom panel(D).
Warning label position
•The bookshelf is now ready for use.
PAGE 10