Forever Redwood SAN DIEGO PORTSIDE User manual

ASSEMBLY INSTRUCTIONS FOR THE
SAN DIEGO PORTSIDE
WOODEN BENCH
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
SAN DIEGO PORTSIDE WOODEN BENCH
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
Drawing
Description
Seat
Legs
Qty.
1
2
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
SAN DIEGO PORTSIDE WOODEN BENCH
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
D
Drawing
Description
5/16´´ X 5 ½´´ Bolts
(To attach the seat to the legs.)
5/16´´ Washers
5/16´´ Nuts
3´´ Deck Screws
(To attach the legs to the seat).
Note: Dimensions of your hardware will vary depending on size.

P| 3
SAN DIEGO PORTSIDE WOODEN BENCH
www.ForeverRedwood.com
No
1
2
DESCRIPTION
Seat
Legs
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.

P| 4
SAN DIEGO PORTSIDE WOODEN BENCH
www.ForeverRedwood.com
Step 1: Place the seat (1) upside down. After that, use 5/16´´ x 5 ½´´ bolts (A) with washers (B) & nuts (C) to attach the legs (2)
to the seat. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Step 2: Attach the front board of the seat (1) to the legs (2) with 3’’ deck screws (D). Each part has a series of numbers that
indicate where to attach the part with the corresponding number.
2
2
1
2
5/16´´ X 5 ½´´ Bolts
8 X 3´´ Deck screw
1
2

P| 5
SAN DIEGO PORTSIDE WOODEN BENCH
www.ForeverRedwood.com
Step 3: Finally, turn the bench over its feet.
This completes the Bench Assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't
hesitate tocall us (866 332 2403) or email us. We are here to support you.