Kozyard Glider Textilene User manual

Glider Textilene loveseat
Bench
Assembly Manual
Kozyard LLC Products
www.kozyard.com
Copyright 2016 - 2023 Kozyard LLC. | All Rights Reserved.
Version:20231006
• Prior to assembly, ensure that you lay out and identify all
the parts listed in the parts list.
• Tighten all nuts and bolts securely. Hand-tighten all bolts
before use. Avoid using power tools or applying excessive
force during assembly and bolt tightening.
• If you encounter any difficulties during assembly or if any
part is missing or damaged, please don't hesitate to
contact our customer service team via email at
[e-mail] or by calling our toll-free number at
866-355-0018.
• The weight capacity of this chair is 250 lbs.
• Clean the frame components and fabric with a mild soap
solution, then rinse thoroughly. Avoid using bleach, acid,
or any other solvents on either the fabric or frame compo-
nents.
• For a comprehensive warranty policy, please visit
www.kozyard.com. Be aware that warranty terms can
change without prior notification.
• For the best performance and safety of your chair, inspect
and tighten all bolts and fasteners regularly
Assembly Instructions
Care and warranty

F
G
A
B
C
D
E
Description Qty
Part
12
6
8
8
8
8
1
1
1
2
1
1
1
Glider
Right Leg
Left Leg
Leg Connector
Back Bolt
Bolt
Bolt
Washer
Allen Key
Right Arm
Left Arm
Seat
I
J
K
L
M
N
O
Description Qty
Part
H2
M6*15
M6*30
M6*40
M6*18
Bolt
Plastic washer
Part list

Loveseat
A
J
A
C
B
J
1. Connect the right arm (Part B) to the back (Part A)
using Bolt (J) as shown in the diagram.
2. Connect the left arm (Part C) to the back (Part A)
using Bolt (J) as indicated in the diagram.

3. Attach the seat (Part D) to the armrests (Part B and Part C)
using Screw (J) and Screw (I) as depicted in the diagram.
4. Connect the gliders (Part E) to the armrests (Part B and
Part C) using Screw (L), washer (N), and Plastic washer (M)
as indicated in the diagram.
Loveseat
C
J
BD
I
EL
N
M

5. Connect the right leg (Part F) to the glider (Part E)
using Screw (L), washer (N), and Plastic washer (M)
as illustrated in the diagram.
6. Connect the left leg (Part G) to the glider (Part E) using
Screw (L), washer (N), and Plastic washer (M) as shown
in the diagram.
Loveseat
L
L
N
M
N
E
E
F
M
E
G