Forever Redwood THE SILVERADO MODERN PERGOLA User manual

P| 0
THE SILVERADO MODERN PERGOLA –CANTILEVERED ROOF
www.ForeverRedwood.com
ASSEMBLY INSTRUCTIONS FOR
THE SILVERADO MODERN PERGOLA
CANTILEVERED ROOF
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
THE SILVERADO MODERN PERGOLA –CANTILEVERED ROOF
www.ForeverRedwood.com
ONTENT OF BOXES
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Drawing
Hurricane
Gale Wind
Stahdard
Description
Posts
Single Supports-A
Single Supports-B
Supports-A with
In-Between Blocking
Supports-B with
In-Between Blocking
Supports-C with
In-Between Blocking
Lateral Blockings
In- Between Covers-A
In- Between Cover-B
Rafters
Slats
Boots
Standard, Gale Wind or
Hurricane Anchors Bases.
If ordered.
L-Plaques
Qty.
4
2
2
2
1
1
2
2
1
16
3
4
4
8
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
THE SILVERADO MODERN PERGOLA –CANTILEVERED ROOF
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
D
E
F
G
H
I
J
Drawing
Description
½´´ X 3 ½´´ Anchor Bolts
(To attach the anchor bases to the ground).
5/16´´ X 3´´ Lag Bolts
(To attach the anchor bases to the posts).
3/8´´ X 7´´ Bolts
(To attach the Supports-A to the posts. / To attach the
Supports-B together. / To attach the Supports-A together. / To
attach the Single Support-B to the Support-C with in-between
blocking).
3/8´´ X 7 ½´´ Bolts
(To attach the Supports-A to the posts).
3/8´´ X 9´´ Bolts
(To attach the Supports-A to the posts and to the lateral
blockings. / To attach the Supports-B to the posts. / To attach
the Supports-A together and to the lateral blockings).
3/8´´ X 4´´ Lag Bolts
(To attach the Single Supports-A to the Supports B&C).
3/8´´ X 8´´ Lag Bolts
(To attach the Single Supports-B to the Supports-A with in-
between blocking).
3´´ Deck Screws
(To attach the in-between covers A&B to the supports A&B. /
To attach the rafters to the lateral blockings. / To attach the
slats to the rafters. / To attach the boots to the posts.).
3/8´´ X 2 ½´´ Lag Bolts
(To attach the L-Plaques to the supports-A).
3/8´´ X 3´´ Lag Bolts
(To attach the L-Plaques to the posts and to the supports).

P| 3
THE SILVERADO MODERN PERGOLA –CANTILEVERED ROOF
www.ForeverRedwood.com
No.
.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
DESCRIPTION
Posts
Single Supports-A
Single Supports-B
Supports-A with
In-Between Blocking
Supports-B with
In-Between Blocking
Supports-C with
In-Between Blocking
Lateral Blockings
In- Between Covers-A
In- Between Cover-B
Rafters
Slats
Boots
Standard Anchor Bases
L-Plaques
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.

P| 4
THE SILVERADO MODERN PERGOLA –CANTILEVERED ROOF
www.ForeverRedwood.com
NOTE: In order to know where the post needs to be placed, check the numbers on them. If the post is not marked, then place the
single Supports on the ground to locate the markings for each post position and clearly set your bearings. (“Don´t attach yet, only
place them on the ground to begin with”).
Step 1: Install the anchor bases (13)with ½´´ X 3 ½´´ anchor bolts (A). Please see the “How to anchor your pergola document”
for all details. Set your post (1) in the saddle of the anchor bases. Drill a ø ¼´´ hole in the post prior to anchoring to facilitate the
ratcheting of the hardware. After that, use 5/16´´ X 3´´ lag bolts (B) to attach each post to its respective anchor base.
Step 2: Use 3/8´´ X 7´´ bolts (C), 3/8´´ X 7 ½´´ bolts (D) & 3/8´´ X 9´´ bolts (E) to attach the single Supports-A (2) to the posts.
Each part has a series of numbers that indicate where to attach the part with the corresponding number.
1
1
1
1
2
2
13
5/16´´ X 3´´ Lag Bolts
3/8´´ X 7 ½´´ Bolts
3/8´´ X 9´´ Bolts
3/8´´ X 7´´ Bolts

P| 5
THE SILVERADO MODERN PERGOLA –CANTILEVERED ROOF
www.ForeverRedwood.com
Step 3: Attach the Single Support-B (3) to the posts with 3/8´´ x 9´´ bolts (E). After that, use 3/8´´ x 4´´ lag bolts (F) to attach to
the Single Supports-A. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Step 4: Place the Support-B with in-between blocking (5), into the post notches as shown and attach to the post with the single
Support-B bolts. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
3
5
3/8´´ X 9´´ Bolts
3/8´´ X 4´´ Lag Bolts

P| 6
THE SILVERADO MODERN PERGOLA –CANTILEVERED ROOF
www.ForeverRedwood.com
Step 5: Attach the Single Support-B to the Support-B with in-between blocking (5), use 3/8´´ X 7´´ bolts (C). After that, use
3/8´´ x 4´´ lag bolts (F) to attach the Support-B with in-between blocking to the Single Support-A.
Step 6: Place the Supports-A with in-between blocking (4), into the post notches as shown and attach to the post with the single
Supports-A bolts. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
4
4
5
3/8´´ X 7´´ Bolts
3/8´´ X 4´´ Lag Bolts

P| 7
THE SILVERADO MODERN PERGOLA –CANTILEVERED ROOF
www.ForeverRedwood.com
Step 7: Use 3/8´´ X 7´´ bolts (C) to attach the Single Supports-A to the Supports-A with in-between blocking (4). After that,
attach the Supports-A with in-between blocking to the Supports-B, use 3/8´´ x 8´´ lag bolts (G).
Step 8: Attach the lateral blockings (7) to the Supports-A with 3/8´´ x 9´´ bolts (E). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
7
4
4
3/8´´ X 7´´ Bolts
3/8´´ X 8´´ Lag Bolts
3/8´´ X 9´´ Bolts
3/8´´ X 9´´ Bolts
Previously Installed
7

P| 8
THE SILVERADO MODERN PERGOLA –CANTILEVERED ROOF
www.ForeverRedwood.com
Step 9: Use 3/8´´ x 4´´ lag bolts (F) to attach the Support-C with in-between blocking (6) to the Supports-A. Each part has a
series of numbers that indicate where to attach the part with the corresponding number.
Step 10: Attach the Single Support-B (3) to the Single Supports-A with 3/8´´ x 4´´ lag bolts (F). After that, use 3/8´´ x 8´´ lag
bolts (G) to attach to the Supports A&B with in between blocking. Each part has a series of numbers that indicate where to attach
the part with the corresponding number.
6
3
3/8´´ X 4´´ Lag Bolts
3/8´´ X 8´´ Lag Bolts
3/8´´ X 4´´ Lag Bolts

P| 9
THE SILVERADO MODERN PERGOLA –CANTILEVERED ROOF
www.ForeverRedwood.com
Step 11: Use 3/8´´ x 7´´ bolts (C) to attach the Single Support-B (3) to the Support-C with in-between blocking.
Step 12: Attach the in-between covers A&B (8,9) to the Supports A&B with in-between blocking, use 3´´ deck screws (H). Each
part has a series of numbers that indicate where to attach the part with the corresponding number.
3
8
3´´ Deck Screws
9
8
3/8´´ X 7´´ Bolts
9

P| 10
THE SILVERADO MODERN PERGOLA –CANTILEVERED ROOF
www.ForeverRedwood.com
Step 13: Use 3/8´´ x 3´´ lag bolts (J) to attach the L-Plaques (14) to the posts and to the supports. The L-Plaques marked in blue
in the drawing will be attached to the supports-A with 3/8´´ x 2 ½´´ bolts (I). Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
Step 14: Attach the rafters (10) to the lateral blockings with 3´´ deck screws (H). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
14
3/8´´ X 2 ½´´ Lag Bolts
3/8´´ X 3´´ Lag Bolts
3´´ Deck Screws
10

P| 11
THE SILVERADO MODERN PERGOLA –CANTILEVERED ROOF
www.ForeverRedwood.com
Step 15: Use 3´´ deck screws (H) to attach the slats (11) to the rafters. Each part has a series of numbers that indicate where to
attach the part with the corresponding number.
Step 16: Finally, attach the boots (12) to the posts with 3´´ deck screws (H). Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
11
3´´ Deck Screws
3´´ Deck Screws
11
11
12
12
12
12

P| 12
THE SILVERADO MODERN PERGOLA –CANTILEVERED ROOF
www.ForeverRedwood.com
This completes the Pergola assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question,
don't hesitate to call us (866 332 2403) or email us. We are here to support you.