Zest 4 Leisure Rebecca Table User manual

Assembly Instructions
(W x D x H) 1.80m x 0.715m x 0.750m
Product Name: Rebecca Table
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]
V2-10.15

Rebecca Table Assembly Instructions
Requires 2 person assembly.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Rebecca Table Pack List
Item Description Quantity
ALeg 4
B Table Top 1
C Leg Brace 2
D Central Brace 1
Fixings
70mm Screws 26
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Rebecca Table is now complete.
1. Position Leg A as shown in Fig.1a and attach to Table Top B using 4no 70mm
Screws - 2no per side (Figs.1b & 1c). ). Ensure LegA is completely flush into
groove before fixing.
Repeat procedure for remaining Legs A.
2. Position Leg Brace C 350mm (nom.) from base of Legs B and attach using 4no.
70mm Screws –2no. per Leg A (Fig.2). Repeat procedure for remaining Leg
Brace C.
3. Position Central Brace D as shown in Fig.3a and attach to Leg Braces C using
2no 70mm Screws –1no per Leg Brace C (Fig.3b).
1b1a 1c
3a23b