Forever Redwood THE GARAGE ARBOR KITS User manual

ASSEMBLY INSTRUCTIONS FOR THE
THE GARAGE ARBOR KITS
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
THE GARAGE ARBOR KITS
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
4
5
6
7
Drawing
Description
Posts
Support
Brace
Rafter
Central Supports
Slats
Boots
Qty.
2
2
2
2
Will
vary.
Will
vary.
2
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
THE GARAGE ARBOR KITS
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
D
E
F
G
H
I
J
Drawing
Description
½´´ X 3 ½´´ Anchor Bolts
(To attach the anchor bases to the ground).
5/16´´ X 3 ´´ Lag Bolts
(To attach the posts to the anchor bases).
5/16´´ X 5½´´ Bolts
(To attach the supports to the posts).
3/8´´ X 8´´ Bolts
(To attach the braces to the posts).
3/8´´ X 8´´ Lag Bolts
(To attach the supports to the braces).
3´´ Deck Screws
(To attach the rafters to the supports. / To
attach the slats to the rafters. / To attach the
boots to the posts).
5/16´´ X 4´´ Bolts
(To attach the central support to the Rafter).
Washers
5/16´´ Nuts
3/8´´ Nuts
Note: Dimensions of your hardware will vary depending on size.

P| 3
THE GARAGE ARBOR KITS
www.ForeverRedwood.com
No
1
2
3
4
5
6
7
DESCRIPTION
Posts
Support
Brace
Rafter
Central Supports
Slats
Boots
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.

P| 4
THE GARAGE ARBOR KITS
www.ForeverRedwood.com
NOTE: In order to know where the post needs to be placed, check the numbers on them. If the post is not marked, then place
the single Supports on the ground to locate the markings for each post position and clearly set your bearings. (“Don´t attach yet,
only place them on the ground to begin with”).
Step 1: Placed your posts. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Step 2: Attach the supports (2) to the posts with 5/16´´ X 5 ½ Bolts (C). Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
1
2
2
1
5/16´´ X 5 ½ Bolts

P| 5
THE GARAGE ARBOR KITS
www.ForeverRedwood.com
Step 3: Attach the braces (3) to the posts with 3/8´´ X 8´´ bolts (D). After that, attach the braces (3) to the support with
3/8´´ X 8´´ lag bolts (E). Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Step 4: Attach the rafters (4)to the posts with 3´´ deck screws (F). Each part has a series of numbers that indicate where to attach
the part with the corresponding number.
3
4
3
3/8´´ X 8´´ Lag Bolts
3/8´´ X 8´´ Bolts
3´´ Deck Screws

P| 6
THE GARAGE ARBOR KITS
www.ForeverRedwood.com
Step 5: Attach the central support (5) to the posts with 5/16´´ X 4´´ (G). Each part has a series of numbers that indicate where to
attach the part with the corresponding number.
Step 6: Attach the slats (6) to the posts with 3´´ deck screws (F). Each part has a series of numbers that indicate where to attach
the part with the corresponding number.
5
3´´ Deck Screws
6
5/16´´ X 4´´ Bolts

P| 7
THE GARAGE ARBOR KITS
www.ForeverRedwood.com
Step 7: Attach the boots (6) to the posts with 3´´ deck screws (F). Each part has a series of numbers that indicate where to attach
the part with the corresponding number.
3´´ Deck Screws
6

P| 8
THE GARAGE ARBOR KITS
www.ForeverRedwood.com
This completes the Arbor Assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't
hesitate to call us (866 332 2403) or email us. We are here to support you.