Forever Redwood ST. ANTHONY'S FACE TO FACE GLIDERS User manual

ASSEMBLY INSTRUCTIONS FOR THE
ST. ANTHONY´S
FACE TO FACE GLIDERS
ADULT
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
ST. ANTHONY´S FACE TO FACE GLIDERS - ADULT
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
4
5
6
7
8
9
Drawing
Description
Legs
Top Leg Support
Base Leg Support
(Long side)
Base Leg Supports
(Short sides)
Internal Knee Braces
Roof Frame
Straps
External Knee Braces
Floor
Qty.
4
2
2
1
4
1
4
4
1
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
ST. ANTHONY´S FACE TO FACE GLIDERS - ADULT
www.ForeverRedwood.com
CONTENT OF BOXES
No.
10
11
12
13
14
15
16
17
18
Drawing
Description
Bench Seats
Long Bench Supports
Short Bench Supports
Bench Backrests
Bench Arms
Covers
Roof Panels
Slat
Arms
Qty.
2
4
4
2
4
2
2
1
4
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 3
ST. ANTHONY´S FACE TO FACE GLIDERS - ADULT
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
D
E
F
G
H
Drawing
Description
5/16´´ X 2 ½´´ Bolts
(To attach the legs to the top leg supports).
5/16´´ X 5 ½´´ Bolts
(To attach the internal knee braces to the legs).
3/8´´ X 10´´ Bolts
(To attach the frame legs to the roof frame / To
attach the straps to the frame legs and to the roof
frame).
5/16´´ X 3 ½´´ Bolts
(To attach the external knee braces to the roof
frame / To attach the bench seat to the straps / To
attach the bench supports to the bench seat and to
the straps / To attach the bench backrest to the
bench seat / To attach the bench arms to the straps
and to the bench seats / To attach the roof panels
to the covers).
5/16´´ X 4 ½´´ Bolts
(To attach the base leg supports together. /To
attach the external knee braces to the frame legs /
To attach the base leg support to the frame legs /
To attach the covers to the frame legs / To attach
the arms to the frame legs).
3/8´´ X 6 ½´´ Bolts
(To attach the floor to the straps),
5/16´´ X 6´´ Bolts
( To attach the arms to the frame legs).
2 ½´´ Deck Screws
(To attach the slat to the roof panels).
Note: Dimensions of your hardware will vary depending on size.

P| 4
ST. ANTHONY´S FACE TO FACE GLIDERS - ADULT
www.ForeverRedwood.com
No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
DESCRIPTION
Legs
Top Leg Support
Base Leg Support (Long Side)
Base Leg Support (Short Side)
Internal Knee Braces
Roof Frame
Straps
External Knee Braces
Floor
Bench Seats
Bench Supports
Bench Backrests
Bench Arms
Covers
Roof Panels
Slat
Arms
Note: Part numbers in the Drawing are for
reference only. These do not match to the
numbers marked on the parts sent.

P| 5
ST. ANTHONY´S FACE TO FACE GLIDERS - ADULT
www.ForeverRedwood.com
Step 1: Attach the legs (1) to the top leg support (2) with 5/16´´ x 2 ½´´ bolts (A). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
Step 2: Use 5/16´´ x 5 ½´´ bolts (B) to attach the internal knee braces (5) to the legs and to the top leg support. Each part has a
series of numbers that indicate where to attach the part with the corresponding number.
5/16´´ X 2 ½´´ Bolts
Bolts
5/16´´ X 5 ½´´ Bolts
Bolts
2
1
1
5

P| 6
ST. ANTHONY´S FACE TO FACE GLIDERS - ADULT
www.ForeverRedwood.com
Step 3: Use 3/8´´ x 10´´ bolts (C) to attach the frame legs to the roof frame (6). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
Step 4: Use 3/8´´ x 10´´ bolts (C) to attach the straps (7) to the roof frame and to the frame legs. Each part has a series of numbers
that indicate where to attach the part with the corresponding number.
3/8´´ x 10´´ Bolts
6
3/8´´ x 10´´ Bolts
7
7
7
7

P| 7
ST. ANTHONY´S FACE TO FACE GLIDERS - ADULT
www.ForeverRedwood.com
Step 5: Attach the external knee braces (8) to the roof frame with 5/16´´ x 3 ½´´ bolts (D). After that, attach to the frame legs
with 5/16´´ x 4 ½´´ bolts (E). Each part has a series of numbers that indicate where to attach the part with the corresponding
number.
Step 6: Assemble the base leg support (3,4) with 5/16´´ x 4 ½´´ bolts (E), as shown Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
5/16´´ X 3 ½´´ Bolts
5/16´´ X 4 ½´´ Bolts
8
8
3
3
4
5/16´´ X 4 ½´´ Bolts
8

P| 8
ST. ANTHONY´S FACE TO FACE GLIDERS - ADULT
www.ForeverRedwood.com
Step 7: Use 5/16´´ x 4 ½´´ bolts (E) to attach the base leg support to the frame legs. Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
Step 8: Attach the floor (9) to the straps with 3/8´´ x 6 ½´´ bolts (F). Each part has a series of numbers that indicate where to
attach the part with the corresponding number.
5/16´´ X 4 ½´´ Bolts
3/8´´ X 6 ½´´ Bolts
9

P| 9
ST. ANTHONY´S FACE TO FACE GLIDERS - ADULT
www.ForeverRedwood.com
Step 9: Use 5/16´´ x 3 ½´´ bolts (D) to attach the long bench supports (11)to the bench seat (10). Each part has a series of
numbers that indicate where to attach the part with the corresponding number.
Step 10: Use 5/16´´ x 3 ½´´ bolts (D) to attach the bench seat (10) to the straps. Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
5/16´´ X 3 ½´´ Bolts
10
10
5/16´´ X 3 ½´´ Bolts
11
11
10

P| 10
ST. ANTHONY´S FACE TO FACE GLIDERS - ADULT
www.ForeverRedwood.com
Step 11: Attach the short bench supports (12) to the bench seats and to the straps with 5/16´´ x 3 ½´´ bolts (D). Each part has a
series of numbers that indicate where to attach the part with the corresponding number.
Step 12: Attach the bench backrests (13) to the bench seats with 5/16´´ x 3 ½´´ bolts (D). Each part has a series of numbers that
indicate where to attach the part with the corresponding number.
5/16´´ X 3 ½´´ Bolts
5/16´´ X 3 ½´´ Bolts
12
12
13
13
12

P| 11
ST. ANTHONY´S FACE TO FACE GLIDERS - ADULT
www.ForeverRedwood.com
Step 13: Use 5/16´´ x 3 ½´´ bolts (D) to attach the bench arms (14) to the straps and to the bench seats. Each part has a series of
numbers that indicate where to attach the part with the corresponding number.
Step 14: Use 5/16´´ x 4 ½´´ bolts (E) to attach the covers (15) to the roof frame. Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
5/16´´ X 3 ½´´ Bolts
14
15
5/16´´ X 4 ½´´ Bolts
15
14

P| 12
ST. ANTHONY´S FACE TO FACE GLIDERS - ADULT
www.ForeverRedwood.com
Step 15: Attach the roof panels (16) to the covers with 5/16´´ x 3 ½´´ bolts (D). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
5/16´´ X 3 ½´´ Bolts
16
16

P| 13
ST. ANTHONY´S FACE TO FACE GLIDERS - ADULT
www.ForeverRedwood.com
Step 16: Attach the slat (17) to the roof panels with 2 ½´´ deck screws (H). Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
Step 17: Finally, use 5/16´´ x 6´´ bolts (G) and 5/16´´ x 4 ½´´ bolts (E) to attach the arms (18) to the roof frame. Each part has a
series of numbers that indicate where to attach the part with the corresponding number.
2 ½´´ Deck Screws
17
5/16´´ X 6´´ Bolts
5/16´´ X 4 ½´´ Bolts
18
18
18
18

P| 14
ST. ANTHONY´S FACE TO FACE GLIDERS - ADULT
www.ForeverRedwood.com
This completes the Glider assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't
hesitate to call us (866 332 2403) or email us. We are here to support you.