FOS Technologies DMX-6 User manual

FOS 6CH Console

DMX-6
User Manual
Thank you for purchasing of the DMX-6. The This device is used to control spotlights,
dimmers, lighting effects equipment or other DMX controlled devices. To optimize
the performance of this product, please read the user manual carefully before use.
What is included
The following items are included in the box:
▪1pc DMX-6
▪1pc 9V DC power adapter
▪1pc User Manual
Safety Instruction
IMPORTANT INFORMATION!
In order to optimize the recovery and recycling of the materials that old
appliances contain and reduce the impact on human health and the
environment, ensure that this product is recycled at the end of its life.
WARNING!!! To reduce the risk of fire, electric shock, or injury to
persons, follow these important safety instructions:
▪This product is intended for indoor use only!
▪Always turn off, unplug power and allow fixture to cool before servicing.
▪Ensure that fixture is properly grounded.
▪Please keep this User Guide for future consultation.
▪To prevent risk of fire or shock, do not expose fixture to rain or moisture.
▪Make sure power cord is never crimped or damaged.
• Disconnect the unit’s main power when left unused for long periods of time.

Features
▪6 channel faders
▪Master fader
▪Compact design
▪Simple operation
▪Power adapter included
Product Overview
DMX Out Power switch DC power input
Power supply
You can use either a 9-V battery or the 9-V connector for external power supply.
Before connecting check for correct polarity.
Changing the battery
To insert or change the battery, switch off the device first. Loosen the screws located
at the edges of the base plate. Do not loosen the three screws in the middle of the
base plate. Carefully remove the base plate. Take care not to damage the cable.
Change the battery.Remount the base plate without squeezing the cables.
Insert and tighten the screws.
Connection
Connect the DMX input of the device to the DMX output of a DMX controller or
another DMX device. Connect the output of the first DMX device to the input of the
second one, and so on to form a daisy chain. Always ensure that the output of the
last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W)..

SPECIFICATIONS
Ouput: 3pin XLR female
Operating voltage: 9V DC power supply unit or 9V radio batter 6LR61 or 6LF22
Dimension: 173 x 154 x 60 mm
Weight: 0.8 kg