Franke FRE60P10B User manual

You’re about to begin a very happy and delicious
relationship. Let’s get started.
This is no ordinary oven.
Welcome to your newWelcome to your new
Franke OvenFranke Oven
FRE60P10B - 60CM PYROLYTIC OVEN

2
AN IMPORTANT NOTE
Please read this document and the safety information carefully before you first use
your oven.
SUPPORT
Speak to our customer service representatives.
Australia: 03 9700 9100 | [e-mail]
New Zealand: 09 964 0400 | [e-mail]
WARRANTY
Your Franke product is protected by a 2-year warranty. Should you ever need to make a
warranty enquiry, simply contact our service department.
Australia: 03 9700 9100 | ser[email protected]
New Zealand: 09 964 0400 | ser[email protected]
GET SOCIAL
Keep up to date on all things Franke by following us on Facebook and Instagram.
@FrankeAUS
#makeitwonderful
“Let’s let everyone else be ordinary,“Let’s let everyone else be ordinary,
while we make it wonderful”while we make it wonderful”

Contents 3
Chapter 1: Ready, set up, go
5 Introducing your new Franke oven
6 What’s in the box?
6 First time use
6 Warnings and safety
6 Installation instructions
9 Setting the time
9 Child lock function
9 Environmental information
9 Disposal
Chapter 2: Life with your Franke Oven
11 Functions
12 Operating your oven
12 Reminder timer function
12 Pre-set cooking function
13 Pyrolytic function
13 Auto shut-off timer
Chapter 3: Getting the most out of your Franke Oven
15 Cleaning and care
15 Interior lighting
15 Deactivating the LED display
15 Pyrolytic self-cleaning
Chapter 4: Problem, meet solution
17 Trouble shooting
Chapter 5: Last, but not least
19 Warnings, hazards, risks and legal
Looking for something?
21 Glossary and index
CONTENTS

Chapter 1 Ready, set up, go 4
READY, SET UP, GOREADY, SET UP, GO
CHAPTER 1
Your Franke oven is designed to be set up
quickly and easily - so you can start creating delicious
masterpieces even sooner.

5Introducing: Your new Franke Appliance
INTRODUCING: YOUR NEW FRANKE OVEN
ACCESSORIES
Left knob Reminder Timer
Button
Auto Cut Off Timer
Button
Start button
Stop / Pause button Right knob
LEFT KNOB
Used to select the cooking function.
RIGHT KNOB
Used to select the cooking temperature and also to change the time.
START BUTTON
Used to start cooking.
STOP / PAUSE BUTTON
Used to stop or pause cooking. Selecting this button twice turns the oven off.
AUTO CUT OFF TIMER
Used to set the clock, and also for a pre-set cooking timer
REMINDER TIMER BUTTON
Used to set a cooking countdown timer. Beeps 10 times when finished.
Slider bracket
Support the rails on
the left and right of
the oven.
Universal pan
For cooking large
quantities of food
including cakes or
frozen foods
Wire shelf
For grilling, roasting
or baking dishes.
Telescopic runner
The mechanism
on which the
accessories sit

Chapter 1 Ready, set up, go 6
WHAT’S IN THE BOX?
1 x Franke Oven
1 x Wire shelf
1 x Slider bracket
1 x Universal pan
1 x Telescopic runner
1 x Power cable
FIRST TIME USE
When the oven is first switched on, it may give off an unpleasant smell. This is due to the bonding
agent used for the insulation panels within the oven.
Run the oven using the conventional cooking function, 250 degrees Celsius, for 90 minutes to clean all
the impurities and to disregard the smell. Ensure that all packaging is removed.
Please note that the oven may emit a puff of white smoke upon first use.
WARNINGS & SAFETY
• The appliance will become hot during use and directly after use, care should be taken to avoid
touching heating elements.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
• It is necessary to allow disconnection of the appliance from the supply after installation. The
disconnection can be achieved by having the plug accessible or by incorporating a switch in the
fixed wiring in accordance with the wiring rules.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
• Do not use a steam cleaner to clean this appliance.
• WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the
possibility of electric shock.
• Children should be supervised to ensure that they do not play with the appliance.
• WARNING: Accessible parts may become hot during use. Young children should be kept away.
• If any parts become damaged, they must be replaced by the manufacturer only.
• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass, since
they can scratch the surface, which may result in shattering of the glass.
INSTALLATION INSTRUCTIONS
Check the appliance for damage after unpacking it, and don’t connect the appliance if it has been
damaged in transport.
Keep packing materials such as plastic bags and polystyrene out of reach of children as these are
dangerous at all times.
Only a licensed professional may connect the appliance - damage cause by incorrect installation is
not covered under the warranty. Ensure that the panels of the cabinetry around the oven are heat
resistant, and the glues and materials can withstand temperatures of at least 120 degrees Celsius.
Ensure there is adequate air flow around the rear of the oven and there is a gap between the oven and
kitchen unit.
The oven must not be installed behind a decorative door in order to avoid overheating.

Chapter 1 Ready, set up, go 7
Shelf placement and warning
To ensure the oven shelves operate safely, correct placement of the shelves between the side rail is
imperative. Shelves and the pan only can be used between the first and fifth layers.
Placement of the shelves should follow the installation instructions accurately and in the right direction
to ensure no items will fall when removing the shelf or tray.
Bulb replacement
For replacement, process as follows:
1. Disconnect power from the mains outlet or switch off the circuit breaker of the unit’s mains outlet.
2. Unscrew the glass lamp cover by turning it counter clockwise (note, it may be stiff) and replace
the bulb with a new one of the same type.
3. Screw the glass lamp cover back in place.
NOTE: Only use 25-40W/220V-240V, T300°C halogen lamps.
Securing the oven to the cabinet
1. Fit oven into the cabinet recess.
2. Open the oven door.
3. Secure the oven to the kitchen cabinet with two “A” distance holders
which fit the holes in the oven frame and fit the two “B” screws.
OR
Ventilating openings
Ventilating openings
When cooking is finished or in pause state or in waiting state, if the oven’s center temperature is
over 75 degree, the cooling fan will continue working for 15 minutes. Or when the oven’s center
temperature becomes lower than 75 degree, the cooling fan will stop in advance.

Chapter 1 Ready, set up, go 8
L
N
F570
min. H560
D606
E600
80
250
100
595
595
560
575
Connection of the oven wiring
Cabinet installation dimensions

Chapter 1 Ready, set up, go 9
SETTING THE TIME
After connecting the unit to power, the symbols 0:00 will be shown on the display.
1. Press the ‘Clock’ button until the hour figure flashes.
2. Rotate the ‘Right knob’ to adjust the hour figure.
3. Press the ‘Clock’ button so the minute figures flash.
4. Rotate the ‘Right knob’ to adjust the minute figure.
5. Press the ‘Clock’ button to confirm the new time settings.
CHILD LOCK FUNCTION
This oven comes fitted with a child lock feature for the protection of young children.
To activate hold: ‘start’ and ‘stop/pause’ simultaneously for 3 seconds. This will illuminate the ‘lock’
icon.
To deactivate hold: ‘start’ and ‘stop/pause’ simultaneously for 3 seconds. This will release the child
lock, and the ‘lock’ icon will not be shown.
ENVIRONMENTAL INFORMATION
This Franke appliance is particularly energy efficient, however to make the most out of it, and to save
even more energy make sure you adhere to the following steps:
1. Open the appliance door as infrequently as possible during operation.
2. It is best to bake several items on after the other, as the cooking compartment is still warm.
3. Only preheat the appliance if necessary for the recipe
4. For longer cooking times, you can switch the appliance off 10 minutes prior to the end cooking
time, and use the residual heat.
DISPOSAL
Dispose of all packaging in an environmentally friendly manner. Franke practises environmentally
conscious behaviour, and this appliance is labelled in accordance with the used electrical and
electronic appliances waste guidelines.
If you have any questions on disposals, please call the Franke customer service
team on 03 9700 9100.

10Chapter 2 Life with your Franke Oven
life with your franke ovenlife with your franke oven
CHAPTER 2
We designed this oven with one thing in mind.
How do we create a wonderfully simple user experience
for you, our customer?

11Chapter 2 Life with your Franke Oven
Oven Lamp
Which enables the user to observe the progress of cooking without opening the
door. Oven lamp will light for all cooking functions.(except pyrolytic function).
Convection
A heating element plus fan force. This results in an even distribution of heat.
Default temperature 180°C.
Defrost
Ambient air circulating around the oven cavity to safely defrost frozen food.
Bottom Heat
A concealed element in the bottom of the oven provides a concentrated heat to
the base of food (ideal for pizzas). Default temperature 60°C.
Conventional Cooking
A top and bottom heating element work together to provide conventional
cooking. Default temperature 220°C.
Double Grilling with Fan
Using the top heat element in combination with the grill function.
Radiant Grilling
The inner grill element maintains the temperature.
Default temperature 210°C.
Double Grilling
The inside heating element and top element working together.
Default temperature 210°C
Conventional with Fan
Combination of both the heating elements and the fan. This is also the most
energy efficient setting. Lightly browned on the outside, moist on the inside
(ideal for roasting).
Pyrolytic Function
When the function set to prolytic mode, LED display “PYA”. The default
temperature is 450°C. The timer can be set 1:30 or 2:00 hours.
OVEN FUNCTIONS

12Chapter 2 Life with your Franke Oven
OPERATING YOUR OVEN
To select a cooking function and choose your desired temperature:
1. Rotate the ‘left knob’ to choose the cooking function.
The symbol chosen will be shown.
2. Rotate the ‘right knob’ to adjust the temperature to your desired pre-set.
3. Press the ‘start’ button to begin cooking.
4. You can adjust the temperature at any stage. Rotate the ‘right knob’ to desired temperature and
press the ‘on’ button again to update. If ‘start’ is not pressed within 3 seconds, it will revert back
to the previous temperature setting.
5. Press the ‘stop/pause’ button to stop/pause cooking function.
6. Press the ‘stop/pause’ button for a second time to switch oven off.
REMINDER TIMER FUNCTION
The timer allows you to keep an eye over the amount of cooking time that has elapsed. With the
cooking functions off, use the timer to set a reminder:
1. Press the ‘timer’ button to select the hour figure.
2. Rotate the ‘right knob’ to set the hour figure of the timer.
3. Press the ‘timer’ button to select the minute figure.
4. Rotate the ‘right knob’ to set the minute figure of the timer.
5. Press the ‘start’ button to confirm. The time left until the buzzer sounds
is now shown.
NOTE: Timer is not able to be used while cooking is in progress
PRE-SET COOKING FUNCTION
1. Press the ‘pre-set timer’ button once to select the required hour to commence cooking
(the hour will flash until set).
2. Rotate the right control knob to the required hour (start time).
3. Press the ‘pre-set timer’ button again to adjust the minutes (if required).
This will flash until set.
4. Rotate the right control knob to the required minutes.
5. Select the desired cooking function with the left control knob.
6. Rotate the right control knob to adjust the temperature setting as required.
7. Press the ‘start’ button
8. Set the Auto Shut Off timer by rotating the left control knob to reach the desired cooking
time required.
9. Press the ‘start’ button , you will only see the and the actual time of the day on, however
not the selected function or temperature on the screen.
10. As the pre-set time arrives, the oven will switch on to the pre-selected function and
temperature setting.
11. Once the Auto Shut Off timer counts back to zero, it will beep 3 times and completely
switch off the oven.

13
PYROLYTIC FUNCTION
This function sllows you to clean thoroughly the oven cavity.
1. Rotate “left knob” to select the pyrolytic function. LED will display “PYA”.
2. Press “ “ to confirm the cooking. And the default time is 2 hours, “PYA” will display on the LED.
3. Rotate “left knob” to change the pyrolytic time. There have two levers time can be selected
”1:30 or 2:00”.
NOTE:
If the oven door is open when the oven is working, the LED will display “DOOR” and the buzzer will
sound continuously until the door was closed or press cancel button.
Step 1: Before activating the pyrolytic cleaning function, remove any excessive spillage and make sure
that oven is empty. Do not leave anything inside it e.g. pans, baking tray, dripping pan or both side
racks.
As the Pyrolytic cycle will generate temperatures of up to 450°C these accessories could be heavily
damage during the self clean cycle, if left inside.
To remove the side racks:
I. First, you will need to remove the screw located at the bottom middle of both side racks using a flat
head screw driver.
II. One at a time, slowly tilt upwards from the bottom of the rack and moving away from the side of the
oven.
III. Gently pull out the top of the rack, out of the 2 fixing holes.
*Note: Simply reverse these three steps when fitting your side racks back into the oven, once the cycle
has finished and the oven has completely cooled down and safe to touch.
When finished pyrolytic cleaning, don’t interrupt the power in an hour.
AUTO SHUT-OFF TIMER
1. Select the required function (left knob).
2. Select the required temperature (right knob)
3. Press ‘start’ button to begin cooking.
4. Rotate the left control knob clockwise to select cooking time.
5. Then press the ‘start’ button to memorise. If start is not pressed within 3 seconds it will revert
back to the previous time set.
Chapter 2 Life with your Franke Oven

14Chapter 3 Getting the most out of your Franke oven
getting the most out ofgetting the most out of
your franke ovenyour franke oven
CHAPTER 3
Getting the most out of your Franke oven.
Your Franke oven turns work into play, and inspires
creativity every single day.

15Chapter 3 Getting the most out of your Franke oven
CLEANING AND CARE
We want your Franke Appliance to be looking this good for a long time to come. To ensure that the
various surfaces are not damaged through cleaning, please observe the following:
Glass: Glass cleaner and with a microfiber cloth.
Plastic: Hot soapy water with a soft cloth.
Control panel: Clean with a dish cloth and then dry with a soft cloth.
Interior enamelled surfaces: A mix of hot soapy water, vinegar and lemon juice. Wash with a dish
cloth, and then allow the cooking compartment to dry.
Accessories: Hot soapy water and if there are stubborn food deposits, use a stainless steel
scouring pad.
Rails: Hot soapy water and a dish cloth.
Stainless steel handle: Hot soapy water and a mild stainless steel cleaning product with a soft cloth.
INTERIOR LIGHTING
If the interior lighting bulb or cover is defective for any reason or the light no longer operates, please
call our service team for support.
DEACTIVATING THE LED DISPLAY
If the illuminated control panel is too bright for your liking, it is possible to deactivate it temporarily
while the oven is off.
Press and hold the ‘start’ button for 3 seconds to deactivate the LED display. Pressing any button or
turning the rotary knob will reactivate the LED display.
PYROLYTIC SELF-CLEANING
During the ‘pyrolytic’ function, the oven heats up to an extremely high temperature (450°C). This
effortless cleaning process burns off the residues left from roasting or baking. All you have to do is
wipe the ash out at the end with a damp cloth.
For safety reasons the oven door is locked, and will be unlocked when the appliance cools.
To activate the pyrolytic function:
1. Turn the ‘left knob’ to the ‘PYA’ setting
2. Press the ‘start’ button to confirm. This process takes 2 hours and a countdown
is displayed.

16Chapter 4 Problem, meet solution
problem, meet solutionproblem, meet solution
CHAPTER 4
We don’t expect your experience with your new Franke
oven to be anything but wonderful, but here’s some
trouble shooting remedies just in case.

17Chapter 4 Problem, meet solution
TROUBLE SHOOTING
You shouldn’t have any issues with your Franke Appliance, however there are some problems which
can easily be fixed by trouble shooting the table below. If you can’t find your problem, or the remedy
has not fixed the issue, then give our friendly customer service team a call on 03 9700 9100, email
[email protected] or inf[email protected]
Problem Cause and Remedy
The appliance does
not turn on
Check the circuit breaker or fuse box. Check to see if any
other appliances are working.
The appliance door cannot
be opened
The oven is completing its self cleaning pyrolytic function
(PYA). Wait until this is completed and the oven cools down.
The rotary knob can no
longer be turned easily
There is dirt under the rotary selector. Press on the outer
edge of the knob so that you can clean the opposite end.
Pyrolytic function
not starting
The appliance door is open. Please close the door
and try again.
Error message is displayed
Turn the oven on and off again. Cut power to the oven for
10 seconds. If the error remains please contact our support
team and inform them of the error code.
Buttons not responding Clean the control panel with hot soapy water, and ensure
that hands are clean when operating buttons.
0:00 is displayed on the
control panel
Power has been cut since last use, and the clock has
been reset.
Screen is blank The oven either has had its power cut off, or is in energy
saving mode. Press any button to exit power save mode.

18Chapter 5 Last but not least
last but not leastlast but not least
CHAPTER 5
This section contains the warnings, precautions and
legal notices to make sure everything runs smoothly.

19Chapter 5 Last but not least
PYROLYTIC FUNCTION PRECAUTIONS
The oven must be prepared properly for the pyrolytic function. Remove all loose interior parts from
the oven. The racks are to be removed for the duration of the cleaning process. The trays should be
removed during the process to ensure ideal heat distribution. If you want to clean a baking tray, only
place on tray at a time on the bottom shelf. Any additional accessories, packaging or food should not
be present during the pyrolytic process.
The Appliance will become extremely hot during the process and any object surrounding the oven
must be removed (for example tea towels or cooking gloves hanging on the handle). Please keep
children away from the appliance during the self cleaning operation.
Any objects or baking accessories which have not been approved (e.g. pots or pans) will release
harmful noxious gases if left in the oven during this process. This poses a serious risk to human health.
Please dispose of these utensils if left in the oven unintentionally.
OVEN DOOR PRECAUTIONS
Never apply pressure on the oven door when it is closed or open. Never use the oven door as a seat or
bench or apply any pressure to it while it is open. Do not place cookware or accessories on the
oven door.
Glass that has become scratched poses a risk of cracking and ultimately shattering which is a serious
risk to injury. Ensure that glass scraper or any sharp objects are kept away from the oven at all times.
The hinges on the oven door pose a threat for you hands to be trapped. Keep hands clear of the
opening with operating the oven door.
ELECTRIC SHOCK HAZARD
Never carry out an repairs yourself, always get an authorized technician to do any repairs or
maintenance on your oven. If any electrical components become damaged or there is exposed wiring,
there is a risk of electrical shock.
Ensure whenever the oven is in operation and you come into contact with it, that appropriate footwear
is worn.

20Chapter 5 Last but not least
HAZARDS
The following is a comprehensive list of all hazards and risks this product possesses.
Risk of fire:
• Any combustible items left in or near the oven during operation
• During the pyrolytic function if large amounts of food is left inside the oven.
• Be aware of baking paper coming into contact of the heating element.
Risk of burns:
• The appliance becomes very hot. Never touch any surfaces or compartments which has been
exposed to the heating elements.
• Accessories also become very hot. Use appropriate gloves and ovenware.
• Alcoholic vapours may catch fire. Never use a high quantity of alcohol in a cooking recipe.
Risk of scalding:
• Any liquid in the cooking compartment may become hot and potentially dangerous if not
handled carefully.
Risk of magnetism:
• Magnets are used during the creation and operation of the control panel.
Keep away all pace makers.
Risk of electric shock:
• The insulation and coating of oven accessories may cause electric shock if they come into contact
with electrical components.
Risk of death or serious injury to human health:
• The appliance will become extremely hot (around 450°C) during the pyrolytic function and any
non approved cooking utensils may release noxious gases which are hazardous to human health.
• During the pyrolytic functions it is also extremely important to keep children away from the
cooking compartment.
• The cables and wiring harnesses at the rear of the oven must not be tampered with or come into
contact with the hot appliance.
• If the appliance is not operating correctly, do not continue to operate it.
Discuss your problem with our customer service team.