Freedom Irving 23745261 User manual

IRVING CARVER CHAIR
23745261
Page 1 of 4
www.freedom.com.au
www.freedomfurniture.co.nz
Thank you for purchasing the Irving carver chair. Before you begin to assemble your new piece
of furniture, please check to ensure that all hardware and parts have been supplied. This page
lists all contents included in the carton(s).
Follow instructions closely as deviation from them may present a possible safety risk and may
void your warranty.
It is recommended that assembly is done on a soft surface such as carpet to avoid any damage.
If you experience any problems with your new purchase please phone Freedom Customer
Service (FCS) 1300 135 588 (Australia) or 0800 469 327 (New Zealand)
Hardware (supplied)
Parts
Care Information
Timber
Periodically check and re-tighten any fasteners. Dust weekly using a soft,clean cloth.Do not
use harsh abrasives,chemicals or polishes containing silicone.Avoid direct sunlight as this will
cause the timber to change colour.It is important to remove moist substances immediately.
PU
Dust weekly with a clean dry duster. Protect from direct and indirect sunlight. Maintain at least
30cm between your furniture and heat sources. Use Freedom recommended care products
designed for your furniture. Use care products strictly in accordance with the manufacturers
instructions.
M6×14mm
A (x16) B (x1)
1 2 3 4 5

IRVING CARVER CHAIR
23745261
Page 2 of 4
www.freedom.com.au
www.freedomfurniture.co.nz
Step 1.
Step 2.
3
A2
A
1
4

IRVING CARVER CHAIR
23745261
Page 3 of 4
www.freedom.com.au
www.freedomfurniture.co.nz
Step 3.
Step 4.
A
5
A

IRVING CARVER CHAIR
23745261
Page 4 of 4
www.freedom.com.au
www.freedomfurniture.co.nz
Step 5.
Step 6.
A