Freestyle Navigator 2.0 User manual

ENGLISH
NAVIGATOR 2.0
S1
S2
S4
S3
CONTROL BUTTONS
S1.Start/stopbutton
S2.Lap/resetbutton
S3.Modebutton
S4.Lightbutton
DISPLAY MODES:
Thewatchhassixdisplaymodes:
HOMETIME/FOREIGNTIME(TM2),
COMPASS(COMP),CHRONOGRAPH
(CHR),RECALL(RCL),TIMER(TMR)
andALARM(ALM).
Tochangefromonedisplaymodeto
another,pressS3buttononce.The
modedescriptionwillappearfor
around2secondsbeforetheselected
modeisactivated.
NOTE:Inanysettingmode,ifthereis
nokeymanipulationforaround1-2
minutes,thewatchwillautomatically
savetheentereddataandexitthe
settingmode.
HOME AND FOREIGN TIME DISPLAY:
TodisplayFOREIGNTIMEmode,press
S1buttonwhenHOMETIMEmodeis
displayed.Themodedescription(TM2)
willbedisplayed.Tochangebackto
HOMETIMEmode,pressS1button
again.
TO SET THE TIME AND CALENDAR:
1. PressS3buttontoselectHOME
 TIME/FOREIGNTIMEmode.
2. PressandholdS2buttonfor
 around2seconds.Thesecond
 digitswillblink.
3. PressS1buttontoresetthesecond
 digitstozero.
4. PressS3button,theminutedigits
 willblink.
5. PressS1buttontosettheminute
 digits.Holdingdownthebuttonwill
 speeduptheprocess.
6. PressS3button,thehourdigitswill
 blink.
7. PressS1buttontosetthehour
 digits.Holdingdownthebuttonwill
 speeduptheprocess.
8. Followthesamepatterntosetthe
 hourformat,date,month,year,
 hourlychimeoptionandbutton
 beepoption.
9. Tosetthehourformat,pressS1
 buttontotogglebetween12-hour
 and24-hourformat.TheP.M.indi-
 catormaybedisplayedtoindicate
 thetimeperiod12:00A.M.–11:59
 P.M.in12-hourformat.
10.Tosetthehourlychimeoption,
 pressS1buttontoturnitONor
 OFF.
11.Tosetthebuttonbeepoption,press
 S1buttontoturninONorOFF.
12.Afternishedmakingalltheset-
 tings,pressS2buttontoconrm.
NOTE:Theday(oftheweek)is
automaticallysetinaccordancewith
thedate.Thedatecanbesetwithin
therangeof1January2008to31
December2099.
NOTE:InFOREIGNTIMEsettings,only
thehourdigitsandminutedigitsare
opentosetting.Allothersettingsare
synchronizedbetweenHOMETIMEand
FOREIGNTIMEmode.
TO USE THE COMPASS:
PressS3buttontoselectCOMPASS
mode.Thecurrenttimewillbe
displayedforaround0.5second,then
therelativecompasspointandangular
bearingwillbedisplayed.
NOTE:Thismovingpointerrepresents
thedirectionofNorth(N).
NOTE:Ifthereisnokeymanipulation
for20seconds,thecompasssensor
willbedeactivatedforpowersaving
andthewatchwilldisplayonlythe
currentHOMETIMEorFOREIGNTIME
(dependsonyourselectionintime
mode).PressS1buttontore-activate
thecompasssensor.
NOTE:Ifthecompassdoesnotseem
toworkwell,forexample:whenit
displaysthewrongcompassdirection
oritdisplays“DIST”(distort)onthe
screen,thenyouhavetocalibratethe
compass.Youshouldalsocalibrate
itafterreplacingthebattery.Ifyour
watchhasbeenexposedtostrong
electromagneticelds,suchaselectric
lines,magnetsorloudspeakers,then
youhavetocalibrateitagain.Please
alsocalibratethecompassbefore
usingitforthersttimeandbeforea
longtrip.
NOTE:Becauseofthedifferencebe-
tweentrueNorthandmagneticNorth,
youhavetocompensateitbyadjusting
thecompassdeclination.Thedeclina-
tionangleforyourlocalareamaybe
foundbelow:
City  Declination
   Angle
  
Anchorage 22E
Atlanta 4W
Bombay 1W
Boston 16W
Calgary 18E
Chicago 3W
Denver 10E
Jerusalem 3E
London 4W
LittleRock 3E
Livingston,MT 14E
Munich 1E
NewYorkCity 14W
Orlando 5W
Oslo 2W
Paris 2W
RioDeJaneiro 21W
SanFrancisco 15E
Seattle 19E
Shanghai 5W
Toronto 11W
Vancouver 20E
WashingtonDC 10W
Waterbury,CT 14W
TO SET THE DECLINATION ANGLE:
InCOMPASSmode,
1. PressandholdS2buttonfor
around  2seconds
toenterintoCALmode.
2. PressS3button,thedeclination
 anglewillblink.
3. PressS1orS3buttontosetthe
 declinationangle.Holdingdownthe
 buttonwillspeeduptheprocess.
4. Afternishedmakingallsettings,
 pressS2buttontoreturntoCOM-
 PASSmode.
TO CALIBRATE THE COMPASS:
InCOMPASSmode,
1. PressandholdS2buttonfor
around  2seconds
toenterintoCAL(cali- 
bration)mode.
2. PressS1button,thepointerswill
 begintorotateclockwise.
3. Rotatethewatchhorizontallyin
 clockwisedirectionslowlyforat
 least2rotations,takingatleast15
 secondsperrotation.
4. PressS1buttonorleavethewatch
 idlefor60secondstoconrmthe
 calibrationprocess,orpressS2
 buttonorS3buttontoabortthe
 calibrationprocess.
TO USE THE CHRONOGRAPH:
1. PressS3buttontoselectCHRONO
 GRAPHmode.
2. Thechronographwillthenbe
 displayedinitscurrentstatus–
 reset,runningorstopped.
3. Toresumeacounting,pressS1
 buttontoresumefromwhereitleft
 off.
4. Tostartanewcounting,resetthe
 chronographtozerorst.PressS1
 buttontostopcounting,then
 pressandholdS2buttonforaround
 2secondstoreset.
Forthemeasurementofelapsedtime,
InCHRONOGPRAHmode,
1. PressS1buttontostartcounting.
2. Tostopcounting,pressS1button.
 PressS1buttontoresumefrom
 whereitleftoff.
3. Toresettozero,pressS1buttonto
 stopcountingandthenpressand
 holdS2button.
Forthemeasurementofsplittime,
InCHRONOGRAPHmode,
1. PressS1buttontostartcounting.
2. Whilethechronographisrunning,
 pressS2buttononcetoregistera
 lap.Thelapnumberandlaptime
 oftheregisteredlapwillbe
 displayed.Thechronographisstill
 runninginthebackground.
 Afteraround10seconds,thelap
 numberandsplittimeofthecur
 rentlapwillbedisplayed.
3. Repeatthelaststepuntilallthe
 lapshavebeenregistered.
4. Tostopcounting,pressS1button.
 PressS1buttontoresumefrom
 whereitleftoff.
5. Toresettozero,pressS1buttonto
 stopcounting,thenpressandhold
 S2buttonforaround2seconds.
NOTE:Thewatchcanregisterand
recorduptoamaximumof30laps.
NOTE:Thechronographcancountup
toamaximumof99hours,59minutes
and59.99seconds.
NOTE:Youcanleavethechronograph
runningwhileswitchingovertoother
operatingmodes.

Toreducecarbonfootprint,these
Freestyleinstructionsareprintedwith
soyinksonrecycledpaper.
ENGLISH
TO USE THE RECALL FUNCTION:
1. PressS3buttontoselectRECALL
 mode.
2. PressS1buttontoscrollthrough
 therecordedindividuallaptimeand
 totalelapsedtime.
NOTE:Therecallfunctionisavailable
onlywhenthereislaprecord.The
message“NOLAPS”willbedisplayed
ifthereisnolaprecord.
NOTE:Thelaprecordwillbecleared
whenthechronographisreset.
TO SET THE TIMER:
1. PressS3buttontoselectTIMER
 mode.
2. PressandholdS2buttonfor
 around2seconds,thetimerselec
 tionwillblink.
3. PressS1buttontotogglebetween
 timerinterval1andtimerinterval2
 toset.
4. PressS3button,theseconddigits
 willblink.
5. PressS1buttontosetthesecond
 digits.Holdingdownthebuttonwill
 speeduptheprocess.
6. PressS3button,theminutedigits
 willblink.
7. PressS1buttontosettheminute
 digits.Holdingdownthebuttonwill
 speeduptheprocess.
8. PressS3button,thehourdigitswill
 blink.
9. PressS1buttontosetthehour
 digits.Holdingdownthebuttonwill
 speeduptheprocess.
10.PressS3button,theaction-at-end
 selectionwillblink.
11.PressS1buttontoselectamongCS
 (CountStop),CR(CountRepeat)
 andCCU(CountUp).
12.Afternishedmakingalltheset-
 tings,pressS2buttontoconrm.
NOTE:Illustrationoftheaction-at-end
selections:
a) CS(CountStop)–thetimerwill
 stopwhenthecountdownteaches
 zero.
b) CR(CountRepeat)–thetimer
 willrepeatthecountdownwhenthe
 countdownreacheszero.
c) CCU(CountUp)–thetimercount
 uptoamaximumof23hours59
 minutesand59secondswhenthe
 countdownreacheszero.
NOTE:Thetimercannotbeactivated
ifthevalueoftimerinterval1isset
as0:0’00”.
TO USE THE TIMER:
1. PressS3buttontoselectTIMER
 mode.
2. Thetimerwillbedisplayedinits
 currentstate–reset,running,or
 stopped.
3. Toresumeacounting,pressS1
 buttontoresumefromwhereitleft
 off.
4. Tostartanewcounting,reloadthe
 timerrst.
 PressS1buttontostopcounting
 andthenpressS2button.
5. Afterreachingzeroinacountdown,
 atunewillbeemitted.Tostopthe
 tune,pressanybutton.
NOTE:Youcanleavethetimerrunning
whileswitchingovertootheroperating
modes.
TO SET THE ALARM:
1. PressS3buttontoselectALARM
 mode.
2. PressS2buttontoselectamong
 alarmentries1,2and3toset.
3. PressandholdS2buttonforaround
 2seconds.Theminutedigitswill
 blink.
4. PressS1buttontosettheminute
 digits.Holdingdownthebuttonwill
 speeduptheprocess.
5. PressS3button,thehourdigitswill
 blink.
6. PressS1buttontosetthehour
 digits.Holdingdownthebuttonwill
 speeduptheprocess.
7. PressS3buttonthealarmfre
 quencywillblink.
8. PressS1buttontoselectamong
 daily(DLY)andindividualday(of
 theweek)only–Sunday(SUN),
 Monday(MON,Tuesday(TUE),
 Wednesday(WED),Thursday(THU),
 Friday(FRI)andSaturday(SAT).
9. Afternishedthesettings,pressS2
 buttontoconrm.
NOTE:Thealarmwillautomaticallybe
activatedafterbeingset.
NOTE:Thealarmwillworkaccording
toHOMETIMEorFOREIGNTIME(de-
pendsonyourselectionintimemode).
TO USE THE ALARM:
InALARMmode,
1. PressS2buttontoselectamong
 alarmentries1,2and3toset.
2. PressS1buttontoactivatethe
 alarm.Thealarmindicator will
 bedisplayed.
3. PressS1buttonagaintodeactivate
 thealarm.Themessage“OFF”will
 bedisplayed.
WHEN AN ALARM GOES OFF:
A20-secondalarmtunewillbeemitted
atthedesignatedtimewhenthealarm
isactivated.Tostopthetune,press
anybutton.
TO USE THE BACKLIGHT:
PressS4buttontoturnontheback-
lightforaround3seconds.
BEZEL-ACTIVATED BACKLIGHT
FUNCTION:
1. PressandholdS4buttonforaround
 3secondsactivatedordeactivate
 thebezel-activatedbacklightfunc-
 tion.
2. Whenthefunctionisactivated,the
 lightbulbicon willbedisplayed.
 Youcanthenturnonthebacklight
 foraround3secondsbytouching
 thebezelofthewatch.
NOTE:Tousethebezel-activated
backlightfunction,thecasebackofthe
watchmustbeindirectcontactwith
yourskinduringwear.
LOW BATTERY DETECTION:
Whenthebatteryofthewatchisclose
todepletion,thebatterylowindicator
willbedisplayed.
FS8127-NAVIGATOR2.0-1067-MR01