Freezimer DIM-30A User manual

Ice Maker
Instruction Manual
To ensure proper use and for your safety, please read the following
instructions completely before operating the appliance.
DIM-30A
www.freezimer.com
MAX
ON/OFF
ICE FULL
ADD WATER
TAKE ICE
MIN

TO OBTAIN WARRANTY SERVICE YOU MUST PROVIDE A VALID PROOF OF
PURCHASE. PLEASE STAPLE YOUR RECEIPT TO THIS PAGE FOR FUTURE
REFERENCE.
POUR OBTENIR LE SERVICE SUR GARANTIE VOUS DEVEZ FOURNIR UNE PREUVE
D’ACHAT VALIDE. S’IL VOUS PLAIT AGRAFE VOTRE REÇU A CETTE PAGE POUR LA
REFERENCE FUTURE.
PARA OBTENER SERVICIO DE GARANTÍA, DEBE PROVEER UN RECIBO ORIGINAL.
POR FAVOR ENGRAPE SU RECIBO A ÉSTA PÁGINA EN CASO QUE NECESITE
HACER UN RECLAMO.
www.freezimer.com
This machine is intended to produce ice only. It is not intended
for the long-term storage of ice. Move any excess ice into a
freezer for long-term storage (>6 hours) if you desire to keep it.
Ice that is left to sit in the bucket will melt over time.
IMPORTANT
Cette machine a été conçue pour produire de la glace seulement.
Elle ne doit pas être utilisée pour stocker de la glace à long terme.
Déplacez la glace en surplus dans un congélateur pour un
stockage à long terme (>6 heures) si vous désirez la garder. La
glace qui reste dans le seau fondra.
IMPORTANT
Esta máquina está diseñada para producir solamente hielo. No
está diseñada para almacenar hielo a largo plazo. Traslade el
hielo sobrante a un congelador para almacenarlo a largo plazo
(más de 6 horas) si desea conservarlo. El hielo que quede en la
cubeta se derretirá con el tiempo.
IMPORTANTE

It is important that you read these instructions before using your portable ice
maker and we strongly recommend that you keep them is a safe place for future
reference.
Thank you for purchasing this Freezimer product. We are glad you chose us. We
believe that your purchase of this product opens a relationship between you and
Freezimer. We will provide the customer support needed to nurture that
relationship.
This manual contains important information regarding the proper installation,
use and maintenance of your product. Following this manual will ensure that your
product will work at its peak performance and efficiency. Please save the original
product packaging in case you need to safely transport or store your product.
www.freezimer.com 1
For Your Records:
Please write down the model number and serial number below for future
reference. Both numbers are located on the ratings label on the back of your unit
and are needed to obtain warranty service. You may also want to staple your
receipt to this manual as it is the proof of your purchase, and is also needed for
service under your warranty.
Model Number: __________________________________
Serial Number: ___________________________________
Date of Purchase: ________________________________
To better serve you, please do the following before contacting customer service:
· If you received a damaged product, immediately contact the dealer that sold
you the product.
· Read and follow this instruction manual carefully to help you install, use and
maintain your product.
· Read the troubleshooting section of this manual as it will help you diagnose
and solve common issues.
·Visit us on the web at http://www.freezimer.com for product guides, additional
troubleshooting resources and up-to-date information. If you need service, our
friendly customer service representatives are available via email at
[email protected]

TABLE OF CONTENTS
BEFORE PUTTING INTO USE .................................................................................... 3
SPECIFICATIONS ......................................................................................................... 3
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY TIPS ........................................................................................ 4-6
NAME OF THE PARTS ................................................................................................ 6-7
OPERATING PROCEDURES & MAINTENANCE
UNPACKING YOUR ICE MAKER ............................................................................... 7
CONNECTING YOUR ICE MAKER ............................................................................ 8
CONTROL PANEL AND INDICATOR LIGHTS
HOW TO CLEAN .......................................................................................................... 9
CARE AND MAINTENANCE ....................................................................................... 10
USING YOUR ICE MAKER ......................................................................................... 11
30A ICE MAKER APP OPERATION .......................................................................... 12-17
TROUBLESHOOTING ................................................................................................. 18-19
Limited Warranty ….…………………………………………………………………....................…….. 20-25
www.freezimer.com 2

BEFORE PUTTING INTO USE
SPECIFICATIONS
●Before connecting the appliance to the power supply, please let the
ice maker machine stand upright for 24 hours, which reduce the
possibility of the cooling system malfunctioning due to improper
handling during transportation.
●Clean your unit thoroughly before putting into use.（See“How to Clean”）
●Use the parts diagram on page 6 to insure proper positioning of internal
components.
Type
Voltage
Frequency
Current
Power
Refrigerant
Water offer
Ice out
Machine Size
Package Size
N.G
Water tank capacity
G.W
Ice storage capacity
Ice Capacity
DIM-30A
100V-120V
60Hz
2.6A
167W
R134A/ 58g
Half-auto
Continuous
16.4*10.6*16.4 inch
18*13*19 inch
35lbs
2.8L
38.2lbs
1.5KG
40lbs/24h
www.freezimer.com 3

SAFETY PRECAUTIONS
1. This appliance can be used by children that are eight years old and above
and persons with reduced physical, sensory, or mental capabilities, or lack
of experience and knowledge, if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be done by children without supervision.
2. Do not place hands or objects on or near the ice maker’s evaporator
when it is in operation.
3. Do not operate the appliance if the cord is damaged. If the supply cord
is damaged, it must be replaced by the manufacturer in order to avoid a
hazard.
4. Connect the ice maker to proper outlets only. There should be no other
appliance plugged into the same outlet. Be sure that the plug is fully
inserted into the receptacle.
5. Do not run the cord over carpeting or other heat insulators. Do not cover
the cord. Keep the cord away from traffic areas and do not submerge in
water.
6. Unplug the ice maker before cleaning or making repairs.
7. Exercise caution and use reasonable supervision when appliance is used
near children.
8. Do not clean your ice maker with flammable fluids. The fumes can
create a fire hazard or explosion.
9. Do not tip over.
IMPORTANT SAFETY INFORMATION
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the
risk of electrical shock by providing an escape wire for the electrical current.
www.freezimer.com
！
4

www.freezimer.com
10. If the ice maker is brought indoors from outdoors during the winter
time, give it a few hours to warm up to room temperature before
plugging it in.
11. Fill with portable water directly or tap water with purification system.
12. Do not store explosive substances, such as aerosol cans with a
flammable propellant, in this appliance.
13. This appliance is intended to be used in household and similar
applications, such as: Staff kitchen areas in shops, offices, and other
working environments; Farm houses and by clients in hotels, motels,
and other residential type environments; Bed and breakfast type
environments; Catering and similar non-retail applications.
14. Before using this product, place the machine on a platform.
15. Please keep the ice maker stewing 24 hours after receiving the machine.
16. Please make sure that the rear drain is firmly plugged before adding
water to the water tank.
17. The ice cube will be relatively small at first, but this is not a defect.
18. Do not use near hot objects or in dirty air.
19. Do not immerse the machine in water or use it in places where the
machine may be splashed in water or in the bathroom.
20. Do not dismantle or modify the machine.
21. Stop using the machine immediately when an exception or failure occurs.
22. Do not touch the ice making section of this product, and do not open
the lid when in use.
23. Please pull out the plug by holding the front insulation part of the plug,
do not pull the wire.
24. Please periodically clean the dust off the power head.
25. Do not plug the power plug when your hands are wet.
26. Disconnect the power supply and drain out the remaining water from
the rear drain when the ice machine has not been used for a while.
27. The ice cubes of the first cycle may have an odor due to water quality.
This is not a defect. After several times, the smell will disappear. We
suggest you use an ice maker cleaning agent or citric acid to clean it
before you use. Please do not use the ice cubes with an odor to avoid
physical discomfort or other diseases.
5

NAME OF THE PARTS
www.freezimer.com
28. Do not damage the cooling circuit (the piping).
29. Do not damage the power cord and the power plug.
30. Do not use damaged power plugs or loose sockets.
31. Please don't repair or fix the broken power cord by oneself. Please
contact the after-sales service when the power cord is damaged.
1. Water Bin: Used for storing water.
There are 2 methods for adding water:
Pour potable water into water bin directly.
Pour tap water, use water bin filter with dispenser.
2. Max Line: Outside the water tank is a line marking labeled “MAX”. Do
not fill the water tank above this line.
3. Water Bin Filter: Built in a space-saver countertop design, purified water
tank is used to get better high-quality water source, Pull-tab top caps can
be easily inserted and removed for quick filter changes.
4. 1PACK Water Dispenser: Water filter can effectively filter the water of
fluoride, chlorine, lead, dirt, harmful metals and other substances in the
Water Bin
Max Line
Water Bin Filter
6
（1PACK Water Dispenser）
Air Vents
Water Drain
Indicator Lights
Air Vents
Transparent Window
MAX
ON/OFF
ICE FULL
ADD WATER
TAKEICE
MIN
1
2

UNPACKING YOUR ICE MAKER
www.freezimer.com
water, remove the odor, to provide clean and healthy drinking water.
Open the package, take out the filter, and rinse it clean. Put the filter into
the pitcher and press it firmly.
As the first 3 cans of filtered water may contain black granular toner,
please use it for watering plants or just discard it.
5. Transparent Window: Allows you to check how much ice has been
produced without having to open the top and letting warm air in.
6. Indicator Lights: ON/OFF, TAKE ICE, ADD WATRER, ICE FULL.
7. Air Vents : Located on the back and sides of the unit, these vents help
prevent the unit from overhearing. Please leave at least six inches of
space all around the unit for proper ventilation.
8. Water Drain: Allow you to empty the water from the tank easily.
1. Remove the exterior and interior packaging. Check if the ice bin and water filter are
inside. If any part or accessory is missing, please contact our customer service.
2. Keep the machine upright for 24 hours before the first use.
3. Find a location for your ice maker that is protected from direct sunlight and other
sources of heat (i.e.:stove,furnace,radiator). Place the ice maker on a level surface.
Maker sure that there is at least 5 inches of space between the back and sides of
your ice maker and the wall.
4. The appliance must be positioned so that the plug is accessible.
7
PROP. 65 WARNING FOR CALIFORNIA RESIDENTS This symbol indicates the refrigerant R600a and the
non-metal-lic materials of the appliance are flammable. It’s
a warning symbol. Warning: Risk of fire / flammable materials.
WARNING:
Cancer And Reproductive Harm
www.p65warning.ca.gov

CONNECTING YOUR ICE MAKER
www.freezimer.com
1. This unit should be properly grounded for your safety. The power cord of
this appliance is equipped with a three-prong plug which connects with
standard three prong wall outlets to minimize the possibility of electric
shock.
2. Plug your appliance into an exlusive, properly installed, grounded wall
outlet. Do not under any circumstances, cut or remove the third (ground)
prong from the power cord. Any questions concerning power and/or
grounding should be directed toward a certified electrician.
3. This appliance requires a standard 115 volt, 60Hz electrical outlet with
three-prong ground.
Before using your ice maker, it is strongly recommended to clean it
thoroughly.
* Improper use of the grounded plug can result in the risk of electrical
shock. If the power cord is damaged please email our customer service
at [email protected]
DANGER
！
The ice maker is not designed to be installed in an outside area such as a
garage or a porch. Ambient temperatures of below 50 F or above 100.4 F
will hinder the performance of the appliance.
8

CONTROL PANEL AND INDICATOR LIGHTS
www.freezimer.com 9
2.CONTROLS / INDICATOR LIGHTS:
●1.Standby Mode: When the ice maker is powered on, both LEDs light up and you will hear
a beep sound. The ON/OFF button lights up in red and the ice outlet button lights up in blue,
and the machine is in standby mode at this time.
●2. ON/OFF button: Press the button once in standby mode to turn on the ice making
process. Once turned on, the blue LED ring will light up and the unit will start making ice. To
stop ice making, press the power button again, the red LED ring will illuminate and the ice
maker will return to standby mode.
●3.Cleaning: In standby mode, press and hold the ON/OFF button for more than 3 seconds,
and the machine will start and enter the cleaning mode (the ON/OFF indicator blinks in red
and blue light alternately), after the cleaning is over, the machine enters the shutdown
standby mode. If you want to stop the cleaning mode in the middle, please press and hold
the ON/OFF button again for 3 seconds, and the machine will return to the standby mode.
ADD WATER
ICE FULL
Press the button to turn on your ice maker. Once on, a blue LED ring will light up and the
unit will begin to make ice. Press the button again to stop making ice and enter standby mode.
Press and hold the button for more than 3S in the standby state, and the machine will
enter the cleaning mode. If you want to stop the cleaning in the middle of the process, please
press and hold the button again for 3 seconds, and the machine will return to the standby
mode.
Press "TAKE ICE" button and hold on during any mode, the light will flicker and ice will come
out after 2 seconds.
The indicator light turns red when the water reservoir does not have sufficient water.
The indicator light turns red when the ice basket is full.

HOW TO CLEAN
www.freezimer.com
●1. Cleaning: In standby mode, press and hold the ON/OFF button for more
than 3 seconds, and the machine will start and enter the cleaning mode
(the ON/OFF indicator blinks in red and blue light alternately).
●2. After the cleaning is over, the machine enters the shutdown standby
mode.
●3. Dry the exterior with a soft cloth. The outside of the ice machine should
be cleaned regularly.
●4. Close the drain cap.
●5. Warm Tip: Before moving the machine or after you finish using it, please
drain the water from the water tank by using the water drain.
● 6. If the machine has not been used for a long time, please clean it
before use. If it is used frequently, please clean it automatically every half
month.
Note: When the machine is working, long press the power button for more than 3 seconds,
and the machine will enter the shutdown standby mode.
●4. TAKE ICE: Press the "TAKE ICE" button and hold it in any mode, the indicator light will
flash for 2 seconds and the ice will come out. If the ice cubes are stuck on the rotating rod
while taking out the ice, please stop taking out the ice and press the "TAKE ICE" button again
to collect the ice again.
●5. ADD WATER: When the machine detects that there is no water supply for more than
60 seconds, the machine will enter the water shortage mode, the add water light will turn
on, and the compressor will stop working at the same time. When the machines completely
stops running, touch the ON/OFF button once to exit and secure the machine into standby
mode.
●6.ICE FULL: After an hour, ice or other objects block the infrared rays, and the ice full
indicator lights up, and the machine enters ice full protection mode. While under the ice full
protection mode, touch the ON/OFF button once to exit the protection mode and enter the
standby mode.
10

CARE AND MAINTENANCE
www.freezimer.com
1. Before commencing any cleaning, unplug the unit and remove any ice
cubes. Use a diluted solution of water and vinegar to clean the inside
and the outside surface of the Ice Maker. Do not spray Ice Maker with
chemicals or diluted agents such as acids, gasoline or oil. Rinse
thoroughly before starting.
2. Keep any ventilation openings of the appliance enclosure, or in the
built-in structure, clear of obstruction. Do not use mechanical devices
or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
3. Open the drain cap on the back of the machine to drain the water.
4. Clean the inside with diluted detergent, warm water and a soft cloth.
5. The exterior of the ice maker should be cleaned regularly with diluted
detergent and warm water.
6. Dry the inside and outside with a soft cloth.
7. After cleaning, plug the drain pipe on the back of the machine into the
cover.
Tip: When the machine is not in use, open the drain to allow the water to
drain completely from the tank.
Always use fresh water before starting any ice production, either at
initial installation or after a long shut-off period.
11

USING YOUR ICE MAKER MACHINE
www.freezimer.com
1. Press the "ON/OFF" button after the ice maker is powered on, it will start
running. You can also use the mobile APP to control the ice maker
remotely.
Tip: You can use potable water directly or use tap water with the included
water purification system.
2. Pull out the water tank, pour water into the water tank with or without
water purification system, making sure that it does not exceed the
maximum water level.
3. When the ice maker is on, check the water level regularly. If the water
pump fails to pump water, the ice maker will automatically stop and the
"ADD WATER" indicator will turn on. Press the "ON/OFF" button to stop,
add water to the level mark, then press the "ON/OFF" button again to
power on.
Tip: Be sure to turn off the machine before adding water.
4. When the ice storage bucket is full, the ice maker will automatically stop
working and the "ICE FULL" indicator will light up. To restart ice making,
remove the ice cubes and press the "ON/OFF" button.
5. Change the water in the tank every twenty-four hours to ensure a safe
level of hygiene. If the unit is not going to be used for a few days, drain
the water tank under the ice storage bucket and any water in the water
tank in the ice maker (through the drain on the back of the machine),
then refill and run again.
6. The minimum water level is 1.3 inches and the maximum water level is
4.5 inches. When the water level is low, the "ADD WATER" indicator will
light up. Please add water, be sure to turn off the machine before adding
water.
12

30A ICE MAKER APP OPERATION
Notes:
1. At present, the APP distribution network is only suitable for the 2.4G WIFI
network. Please ensure that the ice maker WIFI and the mobile phone
APP WiFi are connected to the 2.4G network at the same time; After the
device is successfully connected to the network, you can use the mobile
phone to remotely control the ice maker with WIFI network or mobile
data network.
2. ON/OFF in the mobile APP interface only
represents the switch of the APP panel,
unable to control the ON/OFF switch of
the ice maker. To control the machine
with APP, you need to use the key
operation in the ON state.
3. Device Network Connection
Step 1: Connect the ice maker to the power supply; Enter the App Store and
Google Play Store with your mobile phone to search for “SMART LIFE”
or scan the QR code below to download the APP program;
www.freezimer.com 13
  
 


Step 2: Please ensure that the mobile phone turns on Bluetooth mode and
connected to the WIFI network;
Step 3: Press the button and the button of the ice maker at the
same time, the two buttons flash alternately, and enter the
automatic network connection;
Step 4: Open the SMART LIFE APP, enter the home page (Figure 1), the main
page displays Add Device, click Add Device or click the upper right
corner to enter the device matching (Figure 2);
14
ON/OFF TAKE ICE
(Figure 1) (Figure 2)

The APP is matched to the device, click "Add" (as shown in Figure 3), select
the 2.4G WIFI network, and enter the WIFI password to configure the
network (as shown in Figure 4).
www.freezimer.com 15
(Figure 3) (Figure 4)
2.4G WiFi
********
Select the WIFI network, enter the password, the ice maker will enter the
network configuration state (as shown in Figure 5).
After the network distribution is successful, click the icon in the upper
right corner (as shown in Figure 6) to enter the APP operation interface
(as shown in Figure 7),

www.freezimer.com 16
(Figure 5) (Figure 6) (Figure 7)
A
B
In the APP interface：
Area A is the operation area, which can operate ice making, cleaning, and
timing functions.
Area B is the function prompt area, which cannot be operated by keys;
You can use the SMART LIFE APP to scan the QR code below to obtain the
distribution network guide map.

Button and Operation Description
Button Instructions
ON/OFF for the APP panel, ON means usable state,
OFF means closed, and the APP cannot be used.
The blue display indicates that the machine is
turned on, in a working or standby state;
After the machine is turned on, press the button to
start the ice-making, and press it again to cancel
the ice-making; The button turns blue in an
ice-making state, and the button turns white when
stops making ice.
www.freezimer.com 17
