3
Parts list
Page 1
Assembly Instruction
General View
Required Tools
GH
FK
inner bottom frame 1pc
-
Rubber Mallet
-Small Slotted screwdriver
-Small Philips screwdriver
(handle assembly)
1.It is recommended that the cabinets are assembled by more than one
person.
2.The use of a raised flat surface during assembly is highly recommended.
3.During shipping and handing,some of the tabs that are used for assembly
may have closed together.Use a small slotted screwdriver to either pry
up or push from behind the tab to re-open.
4.Make sure that the unit is placed on a level surface,as this may effect
the performance of the unit.
down 1pc
4pcs
A
B
C
D
E
F
K
G
H
I
J
left back 1pc left side 1pc left door 1pc right door 1pc
I JDCBA
top 1pc
E
right back 1pc right side 1pc
4pcs 4pcs
4pcs 4pcs 4pcs
Accessories list
outside bottom frame 1pc shelf 1pc
2pcs
PRODUKTZEICHNUNGEN | PRODUCT’S VIEW | RYSUNKI PRODUKTU | NÁKRESY PRODUKTU | SCHÉMAS DU PRODUIT
LE ILLUSTRAZIONI DI PRODOTTO | LAS ILUSTRACIONES DE PRODUCTO
22.10.2019
Parts list
Page 1
Assembly Instruction
General View
Required Tools
GH
FK
inner bottom frame 1pc
-
Rubber Mallet
-Small Slotted screwdriver
-Small Philips screwdriver
(handle assembly)
1.It is recommended that the cabinets are assembled by more than one
person.
2.The use of a raised flat surface during assembly is highly recommended.
3.During shipping and handing,some of the tabs that are used for assembly
may have closed together.Use a small slotted screwdriver to either pry
up or push from behind the tab to re-open.
4.Make sure that the unit is placed on a level surface,as this may effect
the performance of the unit.
down 1pc
4pcs
left back 1pc left side 1pc left door 1pc right door 1pc
I JDCBA
top 1pc
E
right back 1pc right side 1pc
4pcs 4pcs
4pcs 4pcs 4pcs
Accessories list
outside bottom frame 1pc shelf 1pc
2pcs
Parts list
Page 1
Assembly Instruction
General View
Required Tools
GH
FK
inner bottom frame 1pc
-
Rubber Mallet
-Small Slotted screwdriver
-Small Philips screwdriver
(handle assembly)
1.It is recommended that the cabinets are assembled by more than one
person.
2.The use of a raised flat surface during assembly is highly recommended.
3.During shipping and handing,some of the tabs that are used for assembly
may have closed together.Use a small slotted screwdriver to either pry
up or push from behind the tab to re-open.
4.Make sure that the unit is placed on a level surface,as this may effect
the performance of the unit.
down 1pc
4pcs
A
B
C
D
E
F
K
G
H
I
J
left back 1pc left side 1pc left door 1pc right door 1pc
I JDCBA
top 1pc
E
right back 1pc right side 1pc
4pcs 4pcs
4pcs 4pcs 4pcs
Accessories list
outside bottom frame 1pc shelf 1pc
2pcs
Ax1 Bx1 Cx1 Dx1 Ix1 Jx1
x4
Parts list
Page 1
Assembly Instruction
General View
Required Tools
GH
FK
inner bottom frame 1pc
-
Rubber Mallet
-Small Slotted screwdriver
-Small Philips screwdriver
(handle assembly)
1.It is recommended that the cabinets are assembled by more than one
person.
2.The use of a raised flat surface during assembly is highly recommended.
3.During shipping and handing,some of the tabs that are used for assembly
may have closed together.Use a small slotted screwdriver to either pry
up or push from behind the tab to re-open.
4.Make sure that the unit is placed on a level surface,as this may effect
the performance of the unit.
down 1pc
4pcs
A
B
C
D
E
F
K
G
H
I
J
left back 1pc left side 1pc left door 1pc right door 1pc
I JDCBA
top 1pc
E
right back 1pc right side 1pc
4pcs 4pcs
4pcs 4pcs 4pcs
Accessories list
outside bottom frame 1pc shelf 1pc
2pcs
Parts list
Page 1
Assembly Instruction
General View
Required Tools
GH
FK
inner bottom frame 1pc
-
Rubber Mallet
-Small Slotted screwdriver
-Small Philips screwdriver
(handle assembly)
1.It is recommended that the cabinets are assembled by more than one
person.
2.The use of a raised flat surface during assembly is highly recommended.
3.During shipping and handing,some of the tabs that are used for assembly
may have closed together.Use a small slotted screwdriver to either pry
up or push from behind the tab to re-open.
4.Make sure that the unit is placed on a level surface,as this may effect
the performance of the unit.
down 1pc
4pcs
A
B
C
D
E
F
K
G
H
I
J
left back 1pc left side 1pc left door 1pc right door 1pc
I JDCBA
top 1pc
E
right back 1pc right side 1pc
4pcs 4pcs
4pcs 4pcs 4pcs
Accessories list
outside bottom frame 1pc shelf 1pc
2pcs
x4 x8x2 x4 x4 x4
Parts list
Page 1
Assembly Instruction
General View
Required Tools
GH
FK
inner bottom frame 1pc
-
Rubber Mallet
-Small Slotted screwdriver
-Small Philips screwdriver
(handle assembly)
1.It is recommended that the cabinets are assembled by more than one
person.
2.The use of a raised flat surface during assembly is highly recommended.
3.During shipping and handing,some of the tabs that are used for assembly
may have closed together.Use a small slotted screwdriver to either pry
up or push from behind the tab to re-open.
4.Make sure that the unit is placed on a level surface,as this may effect
the performance of the unit.
down 1pc
4pcs
A
B
C
D
E
F
K
G
H
I
J
left back 1pc left side 1pc left door 1pc right door 1pc
I JDCBA
top 1pc
E
right back 1pc right side 1pc
4pcs 4pcs
4pcs 4pcs 4pcs
Accessories list
outside bottom frame 1pc shelf 1pc
2pcs
Ex1
Kx2
