Frontgate BRO KANE 166716B User manual

1/ 2
166716B BRO KANE TABLE LAMP BASE BRONZE
ASSEMBLY INSTRUCTIONS:
Pre-assembly
1) Please read all instructions carefullyand completely beforebeginning assembly.
2) Save all packing materials until assembly is completed to avoid accidentally
discarding anyparts.
Step1.
Step2.
1. Raise the Harp Caps (E) and insert the bottom ends
of Harp (D) into the Saddle (G).
2. Lower the Harp Caps (E) until they coverthe
two-pronged Saddle (G)
Unscrewthe Finial (A) from the Harp Top (C)

2/ 2
Step3.
Care Instruction
To reduce the risk of fire, electricalshock or personal injury, always turn off and unplug
the light fixture and allow it to cool prior to replacing the light bulb.
Do not touch bulb when fixture is turned on. Do not look directlyat lit bulb.
For metal lighting it must be dusted regularly andoccasionally wiping with soft damp cloth.
For tougher dirt, wash with hot and soapy water then rinse and let dry and wipe with dry
soft cloth afterwards.
For metal lighting never use abrasive, strongdetergent or any rinse powder as they
may contain alkali that damage the finish.
Keep flammable materials away fromlit bulb.
Please contact one of our Product Specialists for assembly assistance or questions at
1-800-537-8484 or email [e-mail]. Specialists are available weekdays 8:00 a.m.
to 8:00 p.m. EST or Saturday 9:30 a.m. to 6:00 p.m.
1. Place the Shade (B) over the Harp (D) making sure
the Harp Top (C) extends through the top ring of
Shade (B). SHADENOT INCLUDED
2. Secure the Shade (B) by turning the Finial (A) onto
the Harp Top (C).
3. Insert the specified light bulb (Not Included) into
the Socket (F). This Lamp has been ratedfor up
to a 100 Watt MAX E26 TypeABulb or a 23
Watt MAX CFLBulb. DO NOT EXCEED THE
SPECIFIED WATTAGE.