Fuho TA-1620 User manual

16CH STAND ALONE
TRIPLEXTRIPLEX
OPTION
HDDx2
16CH
MJPEG Remote
USB
Audio XGA
ALAR M MOTION
Audio
ALARM MOT ION
LAN
2008 AUG. Ver.4.0
MANUAL

1
2
4
5
6
6
6
6
7
7
7
7
7
7
7
8
8
8
8
8
9
9
9
10
10
10
10
10
10
11
11
11
12
13
13
13
13
13
14
15
16
23
24
25
26
26
27
CONTENT
1) SPECIFICATION
2) FRONT PANEL
3) REAR PANEL
4) INITIALIZATION
5) DVR SYSTEM SETUP
TIME/DATE SET
HDD FORMAT SET
FACTORY RESET
VIDEO SYSTEM
LANGUAGE
BUZZER
RELAY ENABLE
AUDIO SOUND
CHANGE PASSWORD
FIRMWARE UPDATE
6) DISPLAY SETUP
CAMERA NAME
COLOR SET
AUTO SEQ. SET
BOUND COLOR
7) PTZ SETUP & OPERATION
PTZ SETUP
PTZ OPERATION
8) DVR RECORDING SETUP
HDD OVERWRITE
REC SPEED & QUALITY
PLAYBALCK FRAME RATE
RECORD SETUP
AUDIO SOURCE
9) DVR RECORDING OPERATION
MANUAL RECORDING
SENSOR & MOTION RECORDING
SECHEDULE RECORDING
10) DVR PLAYBACK
RPOMPT PLAYBACK
SEARCH BY TIME
EVENT LIST
RECORD LIST
11) FILES BACKUP
12) NETWORK SETUP
13) NETVIEWER OPERATION
14) STORAGE
15) REMOTE CONTROLLER
16) DEFAULT SETTING TABLE
17) RECORD TIME TABLE
18) PASSWORD AUTHORIZATION
19) HDD COMPATIBILITY

1) SPECIFICATION
NTSC PAL
‧1‧
Video Type
Video Input
Audio Input
Video Output
Audio Output
Display Mode
Display Resolution
Recording Resolution
Compress Rate
(KB/image)
Recording Speed
Compress Algorithm
Operation System
Triplex
Recording Mode
Schedule Recording
Status Indicator (LED)
Event Mode
Alarm Port
PlayBack
Network Protocol
Communication Protocol
HDD Type
HDD Management
P/T/Z Control
Back Up
Firmware Update
Language
Control Mode
Remote Control
Network Function
Power Supply
Unit Dimension
Unit Weight
Operating Temperature
16 CH Input/ 1V p-p / 75 Ohm / BNC
1 CH Input/ RCA
2 CH Monitor Output / BNC
1 CH Output / RCA
Full Mode，4/9/13/16 Division，Circulate Auto Switcher
720 x 480
720 x 240
Normal Image:13~17KB
Complex Image: 20~25KB
Max. 120 fps
720 x 576
720 x 288
Normal Image: 15~19KB
Complex Image: 22~27KB
Max. 100 fps
Modified M-JPEG
Embedded Linux
Record/Playback/Netwowork
Full-Time, Manual, Schedule, Event
Every day circulation four sectors (full-time/minute)
Power, Record, Playback, Network, USB Archive, Zoom magnify,
Freeze, Key Lock
Alarm Trigger, Motion Trigger
Recording Duration:1~99 minute
Alarm in (16ch)/Relay Out (1ch/N.O. or N.C.)
Normal: 1multiple seed
Fast Forward: x2/ x4 / x8 / x16 multiple speed
Fast Backward: x2 / x4 / x8 / x16 multiple speed
Single still image per pushbutton
Searching Function: time table/Event/Manual/Schedule
TCP/IP、DHCP
RS-485
SATA HDD 3.5 inch / 7200 rpm *2
Automatic formatting by stystem
Internal Communication Protocol, RS-485 interface Control
USB 1.1
USB 1.1 flash drive
English/ Chinese / Others
Front panel/ IR remote controller/ Remote keypad control (Optional)
NetViewer (PC application program), LAN download
Live Play Viewer / Network events playback / USB drive files play
AC I/P VOL: AC115V~AC230V CUR: 5A MAX. FREQ: 50~60Hz
43 (w)x31 (D)x4.8 (H) cm (Standard 1U machine)
Approx. 3.5 kg ( Not included Hard Discs)
5℃ ~ 40℃

2) FRONT PANEL
POWER REC PLAY NETWORK
USB
ZOOM
FREEZE
LOCK
12345678
9 10 11 12 13 14 15 16
MEN U
USB Z OO M FR EZ L OCK
ABCDE
AB
POWER REC PLAY NETWORK
USB
ZOOM
FREEZE
LOCK
C
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
D
MENU
USB ZOOM FREZ LOCK
E
USB plug Indicator Led
Channel Buttons
Direction/Auto Switcher
Direction/Display mode
Direction
Direction/System Inf
Functions
MENU PLAY/PAUSE STOP RECORD
USB ZOOM IN/ OUT FREZ LOCK
Direction/Auto Switcher/
System Info./Display mode
‧2‧

★Read page 26 for【Password Authorization】
‧3‧
Front Panel
Status Indicator
(LED)
USB plug
Channel no
Display Mode
Auto Switcher
System Info.
MENU
FREZ
ZOOM
USB
LOCK
REC.
STOP
ENTER
PLAYBACK/
PAUSE
Direction
->FF
Power, Record, Playback, Network, USB Archive, Zoom magnify,
Freeze, Key Lock
Full Mode given under status of recording and playback
Press the buttons to show 4, 9, 13 and 16 divisions.
Double clicks to view each channel from the divisions.
a.Quad sequence switch in quad split mode .
b.Single channel display in sequence.
Channels or duration of stay seconds are settable.
Press to indicate current system information.
Press to enter MENU. Press again to “save” or “exit” the menu.
a.Under full mode, press FREZ to freeze current screen (frame)
b. Under divisions, press FREZ to freeze and select the single
channel that you want to look at.
Press to get a white block. Position the block to mark the
“zoom in”. Press again the button to zoom in the image.
a. Press button to archive video streams. Press again to stop archiving.
b. Under full screen mode, press the button to get and save snapshots.
*Caution: System error may occur if the USB storage is removed
while backup is under way.
Press to lock and get all buttons inactive. Press again to unlock,
pass words ★required.
Press to start manual recording.
Press to stop recording or playback.
Enter an option.
Under recording or monitor modes, press this button to playback procedure.
During playback, press to pause the recording.
Position the MENU or change the option.
In playback operation, push ->
Fast Forward to x 2 / x 4 / x 8 / x 1 6 multiple speed
In playback operation, push
<-Fast Backward to x 2 / x 4 / x 8 / x 1 6 multiple speed
USB drive, firmware update & backup
<-FR

3) REAR PANEL
VIDEO OUT POWER
XGA
AUDI O OUT
AUDI O IN
12345 6 7 8
910 11 12 13 14 15 16
VIDE O OU T 2
VIDE O OU T 1
VIDE O IN
ALAR M
LAN RS -485
DC12 V
D+ D- G
XGA
(OPTION)
RJ45 PORT
RS-485
D+ D- G
ALARM 1
25
‧4‧
Network
connection
Audio Input
Speaker
output
Power
Input
Camera input 1~16
Alarm sensor input / output (DB25)
1、
2、
3、
4、
5、
6、
7、
8、
9、
Sensor input of camera 1
Sensor input of camera 2
Sensor input of camera 3
Sensor input of camera 4
Sensor input of camera 5
Sensor input of camera 6
Sensor input of camera 7
Sensor input of camera 8
Sensor input of camera 9
10、
11、
12、
13、
14、
15、
16、
17、Relay .COM output
18、Relay N.C output
Sensor input of camera 10
Sensor input of camera 11
Sensor input of camera 12
Sensor input of camera 13
Sensor input of camera 14
Sensor input of camera 15
Sensor input of camera 16
19、Relay N.O output
20、GND
21、GND
22、GND
23、GND
24、GND
25、GND

‧5‧
£
Use the power cord provided in the package to connect the power supply
(AC115V~AC230V).
£Connect BNC of Cameras to BNC of DVR
Coaxial cable cat6 or above is suggested.
£DVR Network Cabling
Please connect HUB or Router to the TCP/IP port with RJ connector and make
sure the led is light. Static IP & DHCP are supported.
£Alarm I/O
Alarm I/O DB25(25PIN)
£Speed Dome Camera
Pelco D、Pelco P & MIKAMI Speed Dome protocol supported.
£Start Up
Turn on the switch on the rear panel after above setting.
Press [MENU] and key in password to enter DVR menu.
Power Supply
★Read page 26 for【Password Authorization】
4) INITIALIZATION
PASSWORD
PASSWORD CHECK

£HDD FORMAT SET
£FACTORY RESET
‧6‧
5) DVR SYSTEM SETUP
Press enter MENU. Select 【SYSTEM SET】to set or change the options.
£
1.Select【TIME /DATE SET】and press button to select the options.
Press button to change the settings not under recording status.
2.Date formats 【FORMATE】:yyyy/mm/dd、mm/dd/yyyy、dd/mm/yyyy
3.Time displays on screen when 【DISPLAY】”ON”, not on screen when “OFF”.
4.【LOCAL】is the location of TIME/DATE display. “TOP” or “BOTTOM” available.
TIME /DATE SET
When enter into【HDD FORMATE SET】 , it will warn you “YES”to clear
all data whereas select “NO”. It is not possible to undo HHD format.
Enter into【FACTORY RESET】 and select “YES”to get system default
setting whereas select “NO”. ※for details of【DEFAULT SETTING】
TIME/DATE SETUP
DATE 2006/06/21
TIME 04:44:37
FORMAT YYYY/MM/DD
DISPLAY ON
LOCAL TOP
ENTER SET EXIT
SYSTEM SETUP
[ATTENTION ]
WILL BE LOST ALL HDD DATA ARE YOU SURE ?
YES NO
TIME/DATE SET
HDD FORMAT SET
FACTORY RESET
ENTER SET EXIT
SYSTEM SETUP
TIME/DATE SET
HDD FORMAT SET
FACTORY RESET
ENTER SET EXIT
[ATTENTION ]
DO YOU WANT TO INITIALIZE ?
YES NO

£FIRMWARE UPDATE
‧7‧
£
£
£
£
£
VIDEO SYSTEM
Select【VIDEO SYSTEM】and press to select (NTSC) or (PAL) system.
LANGUAGE
Select【LANGUAGE】and press to select language on screen display.
BUZZER SOUND
Select【BUZZER SOUND】and press to set “ON”or “OFF”of buzzer sound.
RELAY ENABLE
Select【RELAY ENABLE】and press to enable or disable relay device.
※Enter【SENSOR SETUP】to setup sensor.
AUDIO SOUND
Select【AUDIO SOUND】and press to enable or disable the audio.
Only single channel for audio input/output.
£CHANGE PASSWORD
Enter into【CHANGE PASSWORD】to select either【ADMIN PASSWORD CHANGE】
or 【USER PASSWORD CHANGE】. Key in the password and then give a new password.
Key in new password again to confirm this change.
Get the update firmware and put it into directory X:\Firmware of the USB drive( 'X' is the
given name for USB drive under Windows OS. Put the USB drive into the USB port and
enter into【FIRMWARE UPDATE】. Select【UPDATE START】”YES” to tart update or
”NO” to stop proceeding.
※Only use USB port to update firmware. System error results from removing the USB
drive while updating. DVR must reboot after firmware update. To prevent from system
error, run factory reset before use.
CHANGE PASSWORD
ENTER SET EXIT
ADMIN PASSWORD CHANGE
USER PASSWORD CHANGE
FIRMWARE UPDATE
UPDATE METHOD USB
UPDATE START
ENTER SET EXIT

6) DISPLAY SETUP
‧8‧
Enter into MENU . Select 【DISPLAY SETUP】to set up display of each channel.
£
£
£
£
CAMERA NAME
Enter【CAMERA NAME】 to name the camera on screen display.
Select the camera no andress
to name the camera. Select the letters, numbers or symbols at the bottom of screen
with maximum 6 bites for camera's name.
COLOR SET
Enter【COLOR SET】to adjust contrast, brightness, hue and saturation for current
channel. Press to select options. Press to do the adjustments, and the
changes shown directly on screen display.
AUTOSEQ SET
【AUTOSEQ SET】and【QUAD SEQUENCE】provided. about Auto Switcher button
details on FRONT PANEL.
1. Enter【AUTOSEQ】to setup the duration seconds of single channel in sequence.
The maximum duration is up to 99 seconds. It will pass the display in case of setting
0 second. (The default is 02 seconds).
2. Select【QUAD SEQUENCE】and press setup the duration seconds of quad
sequence. The maximum duration is up to 99 seconds. (The default is 02 seconds).
BOUND COLOR & BLANK COLOR
Select 【BOUND COLOR】or【BLANK COLOR】and press to setup the color
of margin lines of blue/white or background of blue/black.

£PTZ SETTING
£PTZ OPERATION
AUTO PAN
7) PTZ SETUP & OPERATION
‧9‧
Make sure to understand the usage for speed dome before your setting up【PTZ】
1. Select the Speed Dome camera from【CHANNEL SELECT】and setup【DEVICE ID】
accordingly.
2. Setup【FAST DOME TYPE】and then【PROTOCOL】. Finish setup of【BAUDRATE】
to operate Speed Dome camera.
3. 【PAN/TILT SPEED】default on 03 and range from 01(slow) to 05 (fast).
After above setting, you can preset a journey of speed dome.
1. Enter【PRESET ADJUST】to select number of 【PRESET SELECT】.
2. Enter【ADJUST POS】to preset the positions of every stop of the journey via navigator
of remote controller and PTZ control button. ( check page 30 for reference).
3. Press back to 【PRESET ADJUST】and select【SAVE PRESET】to save
the settings.
4. Select 【CLEAR PRESET】to clear a preset or clear all presets by selecting
【CLEAR ALL PRESET】。
5. Select 【RETURN TOUR TIME】to set the time that return TOUR mode for speed dome.
6. Press the right side down button on remote controller to enter PTZ control mode.
Under this mode, press up/down/right/left to control speed dome or PTZ control
button. And button on remote controller enables the speed dome moved
by your setting of the presets.
PTZ
[ ]
[ ]
ZOOM_IN ZOOM_OUT
CHANNEL SELECT: 1
DEVICE ID: 001
PRESET ADJUST
FAST DOMW TYPE: FUM 626
PROTOCAL : PELCO D
BAUDRATE : 2400 bps
PAN/TILT SPEED: 03
ENTER SET EXIT
ENTER SET EXIT
PRESET
PRESET SELECT: 01
ADJUST POS
SAVE PRESET
CLEAR PRESET
CLEAR ALL PRESETS
RETURN TOUR TIME: 30

8) DVR RECORDING SETUP
‧10‧
Enter and select【RECORD SETUP】to setup recording functions.
£
£
£
£
£
OVER WRITE
Select【OVER WRITE】and press “YES” to overwrite data in HDD or “NO”
not overwrite it.
※Caution：It's impossible to undo overwritten data.
REC SPEED & QUALITY
Select【REC SPEED】and press to setup recording speed. The default is 60 frames
per second (fps). Setting more frames results more fluently of image movement during play
back. But the larger frame rates may shorten of record time. For reference.
※CIF mode: NTSC 120fps; PAL 100fps. Under CIF mode, DVR will record all channels and
cannot work on option 【RECORD CH SET】.
Select【REC QUALITY】and press to adjust recording quality. Range from 01
(normal) to 04 (better) , default on 03. A better quality image means big size and casues
short record time. For reference, please look up page 32「Record Time」table。
PLAYBACK SPEED
Select【PB SPEED】and press to setup playback speed, default on “AUTO”.
※Caution：Playback speed comes fast forward or fast backward when【REC SPEED】
and【PC SPEED】are not set up at same speed. Setup both of them at the same speed
or set them “AUTO” for a normal playback speed.
RECORD CHANNEL SET
Enter【RECORD CH SET】and press to select channel. Press to enable
or disable of the REC. button , default on able for all channels.
AUDIO SELECT
Enter【AUDIO SELECT】and press to select the audio recordable channel.
The channel selected could do the recording with audio at the same time. This selected
channel on screen display will be yellow marked.

9) DVR RECORDING OPERATION
‧11‧
This DVR provides three recording modes, manual recording, sensor & motion
recording and schedule recording.
£MANUAL RECORDING
Manual recording is pressed to start recording by the user.
1. Press to start recording and saving data to HDD. There will be a red ●
marked on screen display when recording.
2. Press to stop recording.
(Key in the password in case it was set.)
£SENSOR & MOTION RECORDING
Enter and select 【SENSOR SETUP】to setup the sensor recording.
1.Select【CHANNEL SELECT】. Press to select the channel and setup
【ALARM ENABLE】、【MOTION ENABLE】、【MOTION LEVEL】and
【MOTION AREA SET】.
2. Sensor Recording：Select【ALARM ENABLE】and press to setup external sensor
(Normal Open 、Normal Close & Off). Choose N.C./N.O. to work with external sensor
device. On screen display pops up with an “M” upon sensor triggered and DVR starts
the recording, buzzer and screen display.
3. Motion Recording：Select【MOTION ENABLE】and press to setup motion
detection. On screen display pops up with an “M” upon motion detected and DVR
starts the recording, buzzer and screen display.
4.【MOTION LEVEL】sensitivity grades from 01 (low) to 09 (high). Enter
into【MOTION AREA SET】and press to select the area. Press up/down/
right/left buttons to block the area (yellow- motion detection /clear-OFF)
Press again to enable/disable motion area. Press MENU to exit and save the setting.
A B
OFF ON
PASSWORD
PASSWORD CHECK

S
‧12‧
5.Set【BUZZER TIME】for buzzer duration seconds, available from 01 to 99
seconds ( default on 05 seconds).
6.Sensor recording time, default on 10 seconds, is subject to【SENSOR REC TIME】
and ranges from 10 seconds to 99 seconds. Enable【ALARM SCREEN】to provide
full screen display for the alarm triggered camera.
£SCHEDULE RECORDING
Press and select 【SCHEDULE SETUP】to setup schedule recording as
4 sections a day.
1. Enter【SCHEDULE SETUP】and press to select ON/OFF, START, END &、
T/M(footnote 1) also FPS (frame per second). Use button to change the selection.
Press to save and exit setting.
2. will be marked on screen display after schedule set and can not press
to stop the recording.
3. In any emergency case (not in schedule), press to start a manual recording
and press to stop manual recording to back to origin schedule setting.
4. Priority in schedule table 1 > 2 > 3 > 4. Top priority runs the recording time prior
to other schedules. For example, Schedule 2 (06:00~06:23) will run after schedule
1 (06:00~06:59) at 06:59
Footnote ：「 T 」means to record according to setting of START/END time.
「 M 」 means to record according to setting of MOTION RECORDING
or SENSOR RECORDING during START/END time.
START STOP T/M FPS
1 ON 00:00 ~ 06:59 T 30
2 ON 00:00 ~ 20:59 T 60
3 ON 21:00 ~ 23:59 M 60
4 OFF __:__ ~ __:__ _ ___
ENTER SET EXIT

‧13‧
10) DVR PLAYBACK
4 palyback modes are provided as 「DIRECT PALY」、「PLAY TIME SELECT」、
「RECORD EVENT LIST」and 「MANUAL RECORD LIST」Press to enter
palyback.
£
£
£
£
DIRECT PLAY
Use DIRECT PLAY to retrieve the initial video records.
1. Press and select【DIRECT PLAY(10)】to start playback.
2. DIRECT PLAY retrieved the initial video records, even the HDD was overwritten.
3. FF/FR is able to speed up to X 16 multiple when playback. Press to stop playback.
PLAY TIME SELECT
Select PLAY TIME SELECT to retrieve the video records by time.
1.Press and select 【PLAY TIME SELECT(11)】to search time and retrieve the video
records. Press to select year/month/day/hour/minute/second and to give digits.
2. Select the time bar only for red marks, video available,
FF/FR is able to speed up to X 16 multiple when playback. Press to stop playback.
RECORD EVENT LIST
Select RECORD EVENT LIST to retrieve the video records occurred by events.
1. Press and select 【RECORD EVENT LIST(12)】to get event list. Press to select
events and to playback.
2. FF/FR is able to speed up to X 16 multiple when playback. Press to stop playback.
MANUAL RECORD LIST
Select MANUAL RECORD LIST to retrieve the video recorded by manual recording.
1.Press and select 【MANUAL RECORD LIST(13)】to get manual recording list.
Press to select the recording and to playback.
2. FF/FR is able to speed up to X 16 multiple when playback. Press to stop playback.
Manual recording creates a record in manual record list. System builds up list record
at 00:00/04:00/08:00/12:00/16:00/20:00. Suppose DVR starts recording
at 07:30 until 19:30. List record 07:30-08:00、08:00-12:00、12:00-16:00、
16:00-19:30 will be found.

A S
USB
USB USB
USB
A
A
S
‧14‧
11) FILES BACKUP
DVR provides USB backup & CD-RW backup. Backup should be play via NetViewer
program. For details, please refer to chapter 13. NetViewer
£USB BACKUP
Live images or video records can be saved as backup files in USB flash. 2 modes are
available “STILL” and “MOVIE”
1. Enterand select【BAKUP SET】【USB BACKUP】【BACKUP MODE】for
”MOVIE” or “STILL” mode. Press to save and exit.
2. Insert USB flash drive to USB port. Playback the video for backup, then press to
start USB backup.
3. Press to start movie backup while icon will be shown on screen. Press again
will stop the backup. Do not remove USB flash drive until icon is gone.
4. Select a single channel for snapshots (STILL mode). Press to have snapshots.
Do not remove USB flash drive until icon is gone.
★Caution：A error may occur if the USB storage is removed under or status.
USB BACKUP
COPY PC APPLICATION
CD_RW BACKUP
USB BACKUP
ENTER SET EXIT ENTER SET EXIT ENTER SET EXIT
USB BACKUP
USB BACKUP
BACKUP MODE : MOVIE
USB INFORMATION
INSTALL : YES
TOTAL SIZE : 123.8M
USED SIZE : 120.7M
USED PER : 98%
BACKUP MODE : STILL
USB INFORMATION
INSTALL : YES
TOTAL SIZE : 123.8M
USED SIZE : 120.7M
USED PER : 98%
ENTER SET EXIT
START 2006/06/19 14:45
END 2006/06/20 10:06
BACKUP SET
START TIME SET
BACKUP MEDIA : CD
BACKUP SIZE : 0650MB
BACKUP START

12) NETWORK SETUP
‧15‧
Press to enter menu. Select【NETWROK SETUP(4)】to setup network.
A remote user could download instruction manual and NetViewer via IE browser.
User could remotely access the DVR through NetViewer.
£SETUP
【IP MODE(4-4)】(footnote 3) : ” Static IP” & “DHCP”
1.”Static IP” Mode must set【IP ADDR(4-1)】、【SUB NET(4-2)】、【GATEWAY(4-3)】。
2. “DHCP” does not require above setting. Press to exit and get DHCP set.
Enter【NETWORK SETUP(4-5)】to setup the available channel on (NetViewer).
【VIDEO PORT(4-6)】default on 5000；【COMMAND PORT(4-7)】default on 5001.
Press to change【VIDEO PORT(4-6)】&【COMMAND PORT(4-7)】, up to 20
options.【MAC ADDR(4-8)】is the only MAC Address.
※ IP ADRESS, SUB NET & GATEWAY: Block the number and use to change the
digits. Or press and use to set particular digits, 255 is the maximum.
Press again to save the setting
.
Footnote 3：Please contact your ISP to confirm 【IP MODE】
Operation
After above setting, user could download the instruction manual and NetViewer via
IE browser. Please refer to chapter 13 for details of【NetViewer】
£
[ ]
NETWORK SET
IP ADDR : 192.168.009.200
SUB NET : 255.255.240.000
GATEWAY : 192.168.009.004
IP MODE : STATIC IP
N/W ENABLE
VIDEO PORT : 5000
COMMAND PORT : 5001
MAC ADDR : 00.16.55.01.02.03
ENTER SET EXIT

13) NETVIEWER OPERATION
‧16‧
£
£
£
£
Instruction
Network Viewer make it possible to monitor, playback and back up video remotely.
System Requirement
OS：Windows 2000 or above
Software Retrieving & Installation
Retrieving software via USB flash from DVR：
1. Insert USB flash drive into USB port.
2. Enter MENU and select「BACK UP(7)」「COPY PC APPLICATION」to copy
NetViewer.exe、NVP3000_DLL_MMX.DLL and WNASPI32.DLL to USB flash drive.
3. Copy 3 files NetViewer.exe、NVP3000_DLL_MMX.DLL and WNASPI32.DLL from
USB flash to PC. Then, NetViewer.exe is workable.
→Retrieving software via IE Browser：
Access DVR IP via IE browser and then find the below pictures shown.
1.Click NetViewer to download netviewer.exe
2.After installation of NetViewer, icon will be created on PC desk. Click the
icon to run it.
BACKUP SET
USB BACKUP
COPY PC APPLICATION
CD_RW BACKUP
ENTER SET EXIT

(3) Buttons
DVR
AVI
LOCAL
‧17‧
£INTERFACE
(1) Video Display
Video comes up to this area in divisions subject to setting.
(2) Status Indicator
It lights up while recording.
It lights up while AVI backup.
It lights up while saving video to PC
Real time monitor
Pause/Stop
AVI format
HDD Backup
Disconnect
Connect
Press to start monitor in remote
Stop monitor or backup files
Convert files to .AVI format
Disconnect to DVR
Connect to the DVR
Save video stream to PC's HDD (Using to playback)
(1)
(5)
(2)
(3)
(6)
(4)