Fuji Xerox Color C60 User manual

Choosing the product that
best fulfils your needs
Fuji Xerox Color C60/C70 Printer
with Integrated Fiery Ex-i and Fiery EX Print Server
Customer Expectation Document
June 2018 –Version 1.21
CSO-FN-CED-254

This page is intentionally blank

2
Contents
What Does This Document Mean to Me?..................................................................................................3
Product Overview...............................................................................................................................................3
Monthly Print Volume Range ........................................................................................................................3
Product Configuration......................................................................................................................................4
Space Requirements (Minimum Service Clearance)..............................................................................4
Installation Requirements..............................................................................................................................6
General Installation Requirements..............................................................................................................................................................................6
Responsibility Matrix........................................................................................................................................8
Product Specifications .....................................................................................................................................9
Security.................................................................................................................................................................................................................................9
Engine Specifications.......................................................................................................................................................................................................9
DMP Features .................................................................................................................................................................................................................. 10
Multi-Model Driver 2 (MMD2).................................................................................................................................................................................... 10
Network Scanner Specifications................................................................................................................................................................................ 10
Image Quality.................................................................................................................................................................................................................. 11
Copy/Print Speed............................................................................................................................................................................................................ 14
Paper / Throughput........................................................................................................................................................................................................ 14
Paper Tray Capabilities................................................................................................................................................................................................. 16
Document Handler......................................................................................................................................................................................................... 17
Billing Meters ................................................................................................................................................................................................................... 17
Auditron Function .......................................................................................................................................................................................................... 18
Cost Recovery .................................................................................................................................................................................................................. 18
Envelopes .......................................................................................................................................................................................................................... 18
Accessories/Options ....................................................................................................................................... 20
Finishing Options & Specifications ........................................................................................................................................................................... 20
Feeder Options & Specifications ............................................................................................................................................................................... 27
Support ............................................................................................................................................................... 28
Customer Support .......................................................................................................................................................................................................... 28
Remote Services .............................................................................................................................................................................................................. 28
Supplies .............................................................................................................................................................. 29
Consumables & Ordering............................................................................................................................................................................................. 29
Toner Cartridges............................................................................................................................................................................................................. 29
Safety Data Sheets ........................................................................................................................................ 30
Approvals .......................................................................................................................................................................................................................... 30
Integrated Fiery Colour Server Ex-i and EX Print Server................................................................... 30
System start-up............................................................................................................................................................................................................... 30
Microsoft Windows Certificate of Authenticity (COA) ....................................................................................................................................... 30
Specifications................................................................................................................................................................................................................... 31
Running Antivirus Software ........................................................................................................................................................................................ 32
Security.............................................................................................................................................................................................................................. 32
Non-standard Paper Size Support............................................................................................................................................................................. 32
Customer Service and Support................................................................................................................................................................................... 32
Adobe PDF Print Engine ............................................................................................................................................................................................... 32
File Creation..................................................................................................................................................................................................................... 32
Supported File Formats ................................................................................................................................................................................................ 33
Key Features and Considerations.............................................................................................................................................................................. 33
Purchasable Options...................................................................................................................................................................................................... 34
Variable Information .................................................................................................................................................................................................... 35
Network Specifications for EX-i Integrated Fiery and EX Print Colour Servers........................................................................................... 35
Printing Services.............................................................................................................................................................................................................. 35
Client Specifications...................................................................................................................................................................................................... 36
PPDs and Print Drivers .................................................................................................................................................................................................. 36
Fiery System Software Limitations........................................................................................................................................................................... 36
Business Validation Document.................................................................................................................. 36

3
What Does This Document Mean to Me?
The purpose of this document is to ensure that you understand the product capabilities, with regards to performance, and
to explain the recommended operating guidelines. With this information, you will be able to ensure the Fuji Xerox Color
C60/C70 Printer is the right product for your business. In this document you may see the product referred to as Fuji Xerox
Color C60/C70 or PCC60/C70. If you have any further questions, please contact your sales representative and they will be
happy to help.
This document is based on knowledge available at the time of publication and is for you to keep for future reference. It is
an “evergreen” document. It will be updated as the program proceeds. Review of this material is mandatory prior to signing
an order.
Product Overview
The basic launch configuration of Fuji Xerox Color C60/C70 Printer will consist of a print engine that provides full 4-
colour/mono printing at up to 75 A4 pages per minute, a choice of feeding and finishing options and choice of Digital
Front End’s.
There will be no copier-only offering of this product.
As part of the Fuji Xerox Color C60/C70 Printer development program, there is a choice of Print Servers depending on
Customer requirements:
•Integrated Fiery Colour Server Ex-i (subject of this document)
•EX Print Server, Powered by Fiery (subject of this document)
•Integrated FreeFlow Print Server
Note: Only one Print server can be attached concurrently
Monthly Print Volume Range
This product is designed for operation based on the following recommended monthly print volumes:
Fuji Xerox Color C60/C70
Minimum AMPV
10,000
Maximum AMPV
70,000
Duty Cycle
350,000
Machine Life
4,500,000
Rated Print Speed
(A4 LEF)
Color C60
Color C70
60 ipm colour
70 ipm colour
65 ipm B/W
75 ipm B/W
Monthly Print Volume Range numbers quoted are A4 equivalent impressions - an A3/SRA3 sheet equals 2 x A4 equivalent
impressions.
AMPV (Average Monthly Print Volume) Range- AMPV assumes 70% colour / 30% mono per month.
Working outside this range may affect machine performance. If the device consistently operates at a higher AMPV than
the maximum stated, the customer should consider the purchase of multiple devices or a device with a higher average
monthly print volume.
Duty Cycle- If the device is occasionally used outside of the AMPV range, printing should not exceed the duty cycle limit.
Duty cycle represents the rated print volume capacity of the device for a given month (printed on recommended stock
and assuming 8hrs per day, 20 days per month usage).
Machine Life- The manufacturer’s Print Volume limit for reliable performance of the device for the machine’s life.
Rated Print Speed- Pages printed per minute on A4 Long Edge Feed stock, 90gsm.
All references to print volumes are based on using centerline paper.

4
Product Configuration
Item
Standard (✓)
or Option (O)
Comments
Print
Server
Digital Front End (DFE), RIP
O
There is a choice of Colour Print Server available for the
Color C60/C70 Printer and includes Integrated Fiery
Colour Server Ex-i, EX Print Server and Integrated
FreeFlow Print Server.
The Color C60 / C70 is not sold as a Copier only model
Feeding Options
Bypass Tray
✓
If an OHCF is purchased, the Bypass tray is relocated to
its new position on these units.
A4 High Capacity Feeder (A4 HCF)
O
Cannot work in tandem with another HCF or OHCF
A4 High Capacity Feeder (A3 OHCF)
single tray
O
Cannot work in tandem with another HCF or OHCF
Oversized High Capacity Feeder (A3
OHCF) 2 tray
O
Cannot work in tandem with another HCF or OHCF
Engine
(IOT)
Color C60 / C70
✓
Image Output Terminal (IOT) / Print Engine
Finisher Options
Interface Module (IFM)
O
Only required with a Finisher D4
Offset Catch Tray (OCT)
O
Cannot work in tandem with another Finisher Option
Standard Catch Tray
O
Cannot work in tandem with another Finisher Option
Finisher C3
O
Cannot work in tandem with another Finisher Option
Finisher C3 with Booklet Maker
O
Cannot work in tandem with another Finisher Option
Finisher C3 folder unit
O
Option for Finisher C3 only
Finisher D4 w/without booklet maker
O
Cannot work in tandem with another Finisher Option
and requires an IFM
C/Z Folding unit (D4 Folder Unit)
O
Option for Finisher D4 only
2/3/4 Hole Punch unit for Finisher C3
O
Options for Finisher C3 only
3 Hole Punch for Finisher D4
O
Option for Finisher D4 only
Square fold Trimmer
O
Option for Finisher D4 with Booklet Maker only
GBC AdvancedPunch
O
Requires an IFM and either HCS or Finisher D4
Space Requirements (Minimum Service Clearance)
These specifications are based on Occupational Health and Safety (OH&S) standards and allow for the safe and effective
operation and servicing of the device, including space for:
•Moveable components, such as draws and doors
•A technician to safely access the device
These space requirements (site width & site depth) are the minimum requirement and compliance with these standards is
mandatory for the safety of staff members. Site width and site depth changes with each configuration. Refer to the tables
below for actual site requirements for each configuration.
Site Diagram
Left Service
Clearance
330mm
Right
Service
Clearance
610mm
Front
Service Clearance
1070 mm
Site Width*1
Site
Depth*1
Machine IOT + chosen options
Rear Service Clearance
(Non Movable*2) 610mm
Rear Service Clearance
(Movable*2) 250mm

5
*1 Refer to the tables below for actual site space requirements for each available configuration
*2 Rear service clearance is measured from the wall to the back of the IOT (not the Integrated Fiery Server if fitted).
. Installation of an Oversize High Capacity Feeder; Finisher D3 w/booklet & folder or Finisher D4 results in a Non-Moveable
installation.
Minimum overhead clearance for all installations (Measured from floor to ceiling) = 2,000 mm (H). Actual machine height
is 1,423mm.
NOTE: If an External Print Server is connected, an additional 91.5cm x 91.5cm square site area is required outside of the
machine space requirements
TIP: when using the below table refer to the configuration of your device, working from left (feeder) to right (finisher)
IOT without HCF
Configuration
Min. Site Space (mm)
Comment
(refer to site diagram for
dimensions required)
Site Width
Depth (with
Integrated Fiery)
IOT + Catch Tray
2372
2123
Movable Installation
IOT + C3 Finisher
2802
2123
Movable Installation
IOT + C3 Finisher (with Booklet Maker)
2861
2123
Movable Installation
IOT + C3 Finisher (with Booklet Maker & folder)
3332
2483
Non-Movable Installation
IOT + IFM + D4 Finisher (+ Booklet Maker)
3357
2483
Non-Movable Installation
IOT + IFM + D4 Finisher (+ Booklet Maker) + Square Fold Trimmer
4139
2483
Non-Movable Installation
IOT + IFM + D4 Finisher (+ Booklet Maker) + GBC AdvancedPunch
3662
2483
Non-Movable Installation
IOT + IFM + D4 Finisher (+ Booklet Maker) + GBC AdvancedPunch +
Square Fold Trimmer
4444
2483
Non-Movable Installation
IOT + IFM + D4 Finisher (with Booklet Maker & Folder Unit)
3557
2483
Non-Movable Installation
IOT + IFM + D4 Finisher (with Booklet Maker & Folder Unit) + Square
Fold Trimmer
4339
2483
Non-Movable Installation
IOT + IFM + D4 Finisher (with Booklet Maker & Folder Unit) + GBC
AdvancedPunch
3862
2483
Non-Movable Installation
IOT + IFM + D4 Finisher (with Booklet Maker & Folder Unit) + GBC
AdvancedPunch + Square Fold Trimmer
4644
2483
Non-Movable Installation
IOT with A4 HCF
Configuration
Min. Site Space (mm)
Comment
Site Width
Depth (with
Integrated Fiery)
IOT + A4 High Capacity Feeder (HCF) + Catch Tray
2452
2123
Movable Installation
IOT + A4 High Capacity Feeder (HCF) + C3 Finisher
2882
2483
Non-Movable Installation
IOT + A4 High Capacity Feeder (HCF) + C3 Finisher (with Booklet
Maker)
2941
2483
Non-Movable Installation
IOT + A4 High Capacity Feeder (HCF) + C3 Finisher (with Booklet Maker
& folder)
3412
2483
Non-Movable Installation
IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (+ Booklet
Maker)
3437
2483
Non-Movable Installation
IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (+ Booklet
Maker) + Square Fold Trimmer
4219
2483
Non-Movable Installation
IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (+ Booklet
Maker) + GBC AdvancedPunch
3742
2483
Non-Movable Installation
IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (+ Booklet
Maker) + GBC AdvancedPunch + Square Fold Trimmer
4524
2483
Non-Movable Installation

6
IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (with Booklet
Maker & Folder Unit)
3637
2483
Non-Movable Installation
IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (with Booklet
Maker & Folder Unit) + Square Fold Trimmer
4419
2483
Non-Movable Installation
IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (with Booklet
Maker & Folder Unit) + GBC AdvancedPunch
3942
2483
Non-Movable Installation
IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (with Booklet
Maker & Folder Unit) + GBC AdvancedPunch + Square Fold Trimmer
4724
2483
Non-Movable Installation
IOT with Oversize High Capacity Feeder (OHCF)
Configuration
Min. Site Space (mm)
Comment
Site Width
Depth (with
Integrated Fiery)
IOT + OHCF + Catch Tray
3080
2483
Non-Movable Installation
IOT + OHCF + C3 Finisher
3510
2483
Non-Movable Installation
IOT + OHCF + Finisher C3 Finisher (with Booklet Maker)
3569
2483
Non-Movable Installation
IOT + OHCF + Finisher C3 Finisher (with Booklet Maker & folder unit)
4040
2483
Non-Movable Installation
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker )
4065
2483
Non-Movable Installation
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker ) + Square Fold
Trimmer
4847
2483
Non-Movable Installation
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker ) + GBC
AdvancedPunch
4370
2483
Non-Movable Installation
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker ) + GBC
AdvancedPunch + Square Fold Trimmer
5152
2483
Non-Movable Installation
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker & Folder Unit)
4265
2483
Non-Movable Installation
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker & Folder Unit) +
Square Fold Trimmer
5047
2483
Non-Movable Installation
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker & Folder Unit) +
GBC AdvancedPunch
4570
2483
Non-Movable Installation
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker & Folder Unit) +
GBC AdvancedPunch + Square Fold Trimmer
5352
2483
Non-Movable Installation
Where a device is installed adjacent to an access way, additional space over and above that specified in this document
may be required. Space required for access ways is dependent on circumstance, and it is recommended that the local
statutory body be contacted for advice.
Installation Requirements
This section contains information on preparing for the delivery and installation of the Color C60 / C70 Printer
General Installation Requirements
•The product should not be exposed to direct sunlight, external heat sources, excessive dust or vibration.
•Do not operate the machine in a poorly ventilated room.
•The machine must be located on a stable and level floor.
•The site clearances must conform to the specifications stated in “Space Requirement (Minimum Service
Clearance)”
•At least 1 x network drop required for each Color C60/C70 installation. Additional drops may be required if
product is configured with an external print server.

7
Machine component dimensions & weight (in preparation for Delivery)
Physical modules and Print Server dimensions.
Module
Width
(mm)
Depth
(mm)
Height
(mm)
Weight
(kg)
IOT (Base / Base + UI)
710 / 1022
803
1153 / 1423
265 / 272
Bypass tray (extended)
560
N/A
N/A
N/A
OCT
410
N/A
N/A
6
A4 HCF
392
610
377
29
1 Tray OHCF
1020
762
992
190
2 Tray OHCF
1020
762
992
207
IFM
345
725
992
45
Finisher C3
840
650
1056
45
Finisher C3 w Booklet
899
650
1056
62
Finisher C3 w Booklet & Folder
1370
725
1056
118
Finisher D4
1050
725
1165
115
Finisher D4 w Booklet
1055
725
1165
150
Finisher D4 w Booklet & Folder
1255
725
1165
190
Square Fold Trimmer
1050
725
533
95
GBC AdvancedPunch
305
725
978
70
Refer to “Space Requirement (Minimum Service Clearance)” for configured site specifications
Delivery Restrictions
Any deliveries not occurring at street level locations must have elevators large enough to accommodate the product
modules. Passageways (doorways and hallways) must also be large enough to allow the machine to pass through.
Temperature & Humidity
Maximum: 32C and 85%RH
Minimum: 10C and 10%RH
Drastic climatic changes are detrimental to image quality, performance and consistency. It is strongly recommended that
the product be operated in an air-conditioned environment to achieve best performance.
For optimal operation of the printing system the temperature should be maintained between 20-25C and humidity
between 45-55% RH
Electrical Requirements
A dedicated 10Amp, 240Volt 50Hz supply is required for each Color C60 /C70 Printer IOT installation*.
In addition, the Color C60/C70 will require individual additional power outlets depending on options purchased:
Device or Option
Quantity
Outlet Type
A4 HCF
Powered by IOT
Powered by IOT
Oversize High Capacity Feeder (OHCF)
1
10 Amp
Finisher C3
Powered by IOT
Powered by IOT
Finisher D4
1
10 Amp
IFM (For Finisher D4)
1
10 Amp
C/Z Folding unit (CD1 Folder Unit finisher C3)
1
10 Amp
C/Z Folding unit (D4 Folder Unit)
Powered by Finisher D4
Powered by Finisher D4
Square Fold Trimmer
1
10 Amp
GBC AdvancedPunch
1
10 Amp
Integrated Fiery Print Server
1
10 Amp
Integrated FreeFlow Print Server
1
10 Amp
Fiery EX Print Server
3
10 Amp

8
*Where a dedicated supply is not available, it is the customer’s responsibility to provide the equivalent, and where the
equivalent is not available, Fuji Xerox will not be held responsible for any damage that may occur.
Fuji Xerox will not be held responsible for any damage that may occur as a result of lightning strikes, power surges, etc.
Fuji Xerox recommends protecting the Fiery Print Server from surges or spikes in electrical power that can damage the
server and result in extended downtime. In areas that tend to experience brownouts or blackouts with more frequency,
installation of an Uninterruptible Power Supply (UPS) is suggested. This protection is the responsibility of the customer.
It is not recommended to have a UPS with software installed. The additional introduction of the software is untested and
not verified by Fuji Xerox.
Surge protectors & UPS’s are provided by the Customer.
Power Consumption / Heat Emission / Noise Emission
Color C60 & C70 Printer
Sleep
Stand-by
Running
Power Consumption
2W (or less)
218W (or less)
1.14 KW (or less)
Heat emission
5.8 BTU/h
743 BTU/h
3889 BTU/h
Noise emission
N/A
+- 34.7 dB (A)
+- 57.4 dB (A)
Sound pressure level according to ISO7779
dB (A)-weighted sound pressure level (bystander positions)
Responsibility Matrix
The following table summarises customer and Fuji Xerox responsibilities relating to the product:
Action
Responsibility
Customer
Fuji Xerox
Installation Actions
Ensure adequate space and power to install device
✓
Confirm and maintain network integrity
✓
Unpack device components
✓
Connect all system components and install device hardware
✓
Install client software / device drivers on PC/workstations
✓*
Configure device to connect to the network
✓
Acquire and install client workstation network hardware and software
✓
Initial operator training
✓
Ongoing Actions
Order and install specified Customer Replaceable Units (CRUs) according to
machine instructions (refer to ‘Supplies’ section later in this document)
✓
Order and install staple and dry ink cartridges according to machine instructions
✓
Remove, repair and re-install any failed components
✓**
Provide Helpline support (Customer Care Centre)
✓**
Provide spare parts
✓**
Provide service
✓**
Perform system software upgrades
✓**
Download any additional fonts to server
✓
Utilise tools mode to adjust machine setting(transfer, registration etc) as required
for particular jobs.
✓
Monitor and adjust calibration for colour matching of colour management
system
✓
Install RIP utilities, printer description files, and print drivers on Client
workstations.
✓
Secure all system software
✓
Setup and administer clients
✓
* Fuji Xerox will provide installation of RIP client software and drivers on one client PC & MAC, as part of the
installation and training session. It is the responsibility of the Customer to disseminate Drivers and utilities to
all other users.
** Fuji Xerox responsibility when a Full Service and Maintenance Agreement (FSMA) is purchased. If FSMA is not
purchased, this action becomes a customer responsibility.

9
Product Specifications
Security
The Color C60/C70 IOT and/or Integrated/EX Fiery includes the following security features:
Active features:
•Print job submission utilises IPsec.
•Secure Scan transmits files using HTTPS (SSL)
•IPV6 support - accept or deny connections from a specific IP address.
•802.x support - IEEE Standard for Information technology. 802.1x Port Based Network Access Control ensures that
devices that are connected to the network have the proper authorisation.
•Secure Login –Device Access Password Protection ensures administrative set-up screen.
•IP Address Restriction (IP Filtering) controls communications with specific network clients.
•Encryption Communicated pathway and Encrypted PDF Direct Print.
Features with configurable parameters:
•Disk Encryption –Uses state-of-the-art AES 256-bit encryption to secure hard disk drive (HDD) data to avoid threats of
unauthorized retrieval/use of document data stored in the internal HDD. Disk Encryption is automatically disabled,
but can be enabled by the System Administrator; refer to the System Administrator Guide for specific instructions.
•Image Overwrite –Forces any temporary image files created during a copy, print, scan or scan to email job to be
overwritten when those files are no longer needed during normal processing, or "on demand" by the system
administrator. Hard Disk Data Overwrite is automatically enabled, but the system administrator can set the
overwrite parameters; refer to the System Administrator Guide for specific instructions.
Centerline Paper
The Color C60 / C70 Printer is designed using Fuji Xerox media described below as a “Centerline Paper”. “Centerline Paper”
is recommended to ensure generating the best image quality from the Printer. It delivers optimum performance in each
category of product specification. Other paper brands or weights may alter the print engine’s capability.
Every effort has been made to ensure that the Color C60 / C70 Printer supports a broad range of media. Please keep in
mind, however, that using only Fuji Xerox-recommended media maximises reliability and paper-handling performance.
All references to media capacity and performance in this document are based on centerline paper. You will see the term
“Centerline paper” several times in this document.
Centerline stock refers to 90gsm Xerox Colotech+.
Parameter Setting Corresponding Each Media
In order to maintain optimum throughput and image quality, the Color C60 / C70 offers parameter setting, which
customers can control. There are several parameters for adjustment, such as, alignment,
perpendicularity, skew, scale, print position and so on, corresponding to characteristics of each media.
Adjusted values can be saved as “profile” for recurring jobs. Please refer to product User Guide for more details.
Note: Paper quality may vary and influences print capability depending on paper manufacturing lot or storing. Please do
not store paper in a place with high temperature and humidity.
Engine Specifications
Item
Color C60 / C70
Comments
Output Resolution
Up to 2400 x 2400 dpi
Up to 600 x 600 dpi
Print
Copy
Scanning Resolution
Up to 600 x 600 dpi
Several scan resolution settings are selectable via Color C60/C70 User
Interface touch panel.
Lower resolutions will result in files that are smaller in size and
thereby reducing network traffic.

10
DMP Features
The Color C60/C70 Printer enables customers to access the latest office features utilising Office equivalent technologies.
These additional capabilities, called Document Messaging Platform (DMP), are available with an additional network
drop or via the Cisco SD2005 5-port 10/100/1000 switch. This enables the Color C60/C70 Printer configuration to
network both the device controller and the integrated Fiery EX-i or Fiery EX Print Server.
The following DMP features are available on the Color C60/C70 Printer:
Standard
•Network scanning –scan to email, scan to folder and scan to PC
•Thumbnail Preview
•SW High Compression , Incl Specific Color Scan
•
Optional
•Searchable PDF (Advanced Scan kit option)
•Scan to MS Word/Excel (Advanced Scan kit option)
•USB Memory Kit (print & scan)
•Gigabit Ethernet kit
The following DMP features are not available on the Color C60/C70 Printer:
•Xerox Standard Accounting for prints
•FAX
USB Print
USB Media Print enables walk-up users to print “Print-Ready” files (PDF, XPS, TIFF, JPEG, TXT) files directly from most
standard (FAT-32 formatted) USB Thumb Drives.
Files are sent directly from the USB drive to the print controller.
Windows 8 Certified USB drives are not supported
Multi-Model Driver 2 (MMD2)
Multi-Model Driver 2(MMD2) is the common PCL6 print driver to support various Fuji Xerox MFPs and Printers.
This is the print driver which can be used to send jobs to the printer without going through the EFI print servers.
⚫The MMD2 driver only supports the following options:
➢Supported Finishers: Offset Catch Trays(OCT), C3 Finisher/C3 Finisher with Booklet Maker, Finisher
D4/Finisher D4 with Booklet Maker
➢Selectable print size from 148mm x 210mm up to a maximum of: 297mm x432mm
➢Selectable media weight: 81-220gsm (Tray 1-4, 81-105gsm)
➢Multiple positioning stapling(4 positions) cannot be set by MMD2 driver.
The user can select the media size/media type with the MMD2 driver, however, the user cannot direct media to be fed
from the trays of HCF B1, High Capacity Feeder B1-S, or High Capacity Feeder C3-DS.
MMD2 print driver does not support coated paper; specialty paper or envelopes.
There is very limited Image quality control when using the “Image Option” tab in the MMD2 print driver
Sqaurefold trimmer is not supported with the MMD2 print driver
Network Scanner Specifications
Item
Description
Type
Colour Scanner
Original Paper Size
Same as the Copy function
Scanning Resolution
600x600dpi, 400x400dpi, 300x300dpi, 200x200dpi
Scanning Halftone
Each Colour of RGB: Input: 10 bits, Output: 8 bits
Scanning Speed*1
Black: 100ppm Colour: 100ppm
[Fuji Xerox Standard Document (A4LEF), 200dpi, scan to folder]
Connectivity
Ethernet 100BASE-TX/10BASE-T/1000BASE-T(Option)
Scan Method
Scan to e-mail
Scan to PC (FTP, SMB); Scan to USB(optional)
Store & Send Link
Scan to Folder
Store to WSD
Network Scanning
File Formats
using
Scan to e-mail; Scan to PC
PDF, DocuWorks, XPS, TIFF, JPEG
MS office (Optional)

11
Item
Description
Scan to USB
Store & Send Link
File Formats
using
Store to Folder
•Using CentreWare Internet Services:
PDF, DocuWorks, XPS, TIFF, JPEG
•Using Stored File Manager 3: TIFF and JPEG
•Using DocuWorks: DocuWorks
•Using Adobe Acrobat: PDF
File Formats
Using Network Scanning
TIFF and JPEG
File Formats
Store to WSD
XPS, TIFF, JPEG, BMP, PNG
Features available with optional
Advanced Scan kit
High Compression by faster scanner throughput
File Format: Searchable PDF(OCR)
File Format: MS Office(Word/Excel)
Features
(Standard)
Thumnail and preview
High Compression
Specific Color Scan, Password Encryption
*1 Scanning speed varies according to the document.
Image Quality
The Color C60/C70 is designed to produce a uniform image. However, Colour Image Quality is subjective and can be
impacted by lighting, and is strongly influenced by paper.
The Color C60/C70 employs a wide media latitude. Feeding heavyweight stocks will result in a higher than normal
amount of paper curl. The resulting paper curl can provide difficulties if precision cutting of the printed sheets is
required.
•As with any printing process, artifacts will occur. These include streaks, mottle, banding, spots, etc. For most jobs and
clients, the expected level of artifacts is within the normal operational and component quality ranges of the system
and will not affect the acceptability of the job. Maintenance procedures are available to mitigate these artifacts.
•Artifacts may occur with more frequency when running heavyweight coated media.
•Artifact-sensitive jobs should be monitored.
•Using products on the Recommended Materials List (RML) and maintaining your environment will also help to
minimise the occurrence of these artifacts.
•Colour quality perception is subjective and will be affected by ambient lighting conditions.
•The appearance of the document displayed on the monitor screen may not match the output print because the
monitor uses RGB Colour space parameters.
•The customer is responsible for calibrating the Color C60/C70 Printer.
•Image quality is strongly influenced by paper surface structure, texture, and Colour. To ensure that your customers
are optimally satisfied, key applications should be printed on the printer using representative paper and reviewed by
the customer.
•The surface texture of some uncoated papers may cause increased graininess in halftone areas printed with only
black toner. This effect may be minimized by adding process black and/or using smooth or coated papers (refer to
the Recommended Materials List).
•Sheets of a job may exhibit slight gloss differential from page to page or within a page. Operational mode, stock
and toner area coverage will have an impact on the ‘level’ of gloss differential.
•Streaks or non-uniform gloss may occur 110mm from the lead edge of a print. This is caused by a slight temperature
change in the heat roller after its first revolution. If this occurs Gloss Mode can be enabled to reduce severity.
•Prints may exhibit random white spots caused by paper dust, stray developer beads, or other miscellaneous particles.
You can reduce the occurrence of white spots by using Fuji Xerox approved paper. If you are cutting your own paper,
ensure that cut edges are dust free, and keep the machine in a clean and dust/dirt reduced environment. Failure to
do this will result in increased frequency of white spots.
•The Color C60/C70 printer is optimised for most media; specific media may result in curl, which can be corrected
using the internal de-curlers on the optional Interface Module (IFM) and optional Light Production Finisher (Finisher
D4).
•Typically, heavy weight papers exhibit increased variability of formation and surface smoothness, which may result
in degraded image quality. Similarly, image quality on textured papers may be degraded.
•If printing images using K toner only, images may be seen as rough or uneven due to paper formation. In this case,
please print on a coated paper or on a paper with smoother surface. Or, adding a few percentages of C, M, Y toner
may help achieving dark, rich black.
•All paper stretches to a certain extent during printing. The amount of stretch is dependent on paper type and
environmental conditions. Stretch is most noticeable on coated stocks. This stretch can affect front-to-back image
registration. Please use the Alignment Profiles feature to minimise this effect.
•Front-to-back registration, image quality (e.g.. white spots), and machine reliability can be adversely affected when
a paper sheet is inaccurately cut, is of poor quality, or loose paper fibers or crumb from coated materials are present
on the paper surface.
•Image registration, image quality (e.g. white spots), jam frequency and machine reliability can be adversely affected
when punched or drilled paper is of poor quality and/or loose hole plugs are present in the ream.

12
•Gloss differential may be exhibited especially when printing on a coated stock or on a high-density image.
•Colour or density variation among prints or on a print may be caused depending on paper being used or print
environment.
•Due to its high temperature and pressure at image adhesion process, prints may exhibit some paper-wave.
•Variation in Colour registration may be observed depending on ambient environment condition, paper types
used, paper weights etc
Print Quality & Colour Management
•The appearance of the document displayed on the monitor screen may not match the output print because the
monitor uses RGB colour space parameters.
•The customer is responsible for calibrating the Color C60/C70.
•For imported RGB images, optimal colour is achieved in the EPS format. Other imported file formats may produce
unexpected results.
•The specification for colour to colour mis-registration is equal to or less than 95 microns, evaluated on Colotech +
90gsm uncoated paper. Colour to colour mis-registration may vary outside of the specification when using
heavyweight papers above 90gsm.
Registration Specifications
Item
Trays 1-4 includes
OHCF (Trays 6-7)
Platen
Tray 5 (Bypass)
Platen
Document Handler
Lead Edge Registration*
± 1.1 mm
± 1.6 mm
± 1.8 mm
Side Edge Registration
± 1.8 mm
± 3.0 mm
± 2.4 mm
Skew along the Lead Edge (200mm)
± 1.6 mm
± 1.6 mm
± 1.7 mm
Skew along the Side Edge (400mm)
± 3.2 mm
± 3.2 mm
± 3.5 mm
Perpendicularity (400mm)
± 1.7 mm
± 1.9 mm
Parallelism (400mm)
± 1.0 mm
± 1.3 mm
Image Loss
•Lead Edge
•Trail Edge**
•Side Edge**
4.0 mm
4.0 mm
3.5 mm
4.0 mm
4.0 mm
3.5 mm
4.0 mm
4.0 mm
3.5 mm
Side 1-2 Registration (Lead Edge
Direction)
± 1.2 mm
Will be larger
-
Side 1-2 Registration (Side Edge
Registration)
± 2.4 mm
Will be larger
-
Magnification
± 0.3%
Horizontal R/E Precision (280mm)
Applicable for 100%
± 0.5%
-
-
± 0.5%
± 0.7%
Horizontal R/E Precision (280mm)
Applicable for 25 to 200%
± 1.0%
-
-
± 2.2%
Horizontal R/E Precision (280mm)
Applicable for 201 - 400%
± 2.0%
-
-
± 3.3%
Horizontal R/E Precision (400mm)
Applicable for 100%
± 0.5%
-
-
± 0.5%
± 0.7%
Horizontal R/E Precision (400mm)
Applicable for 25 - 200%
± 1.0%
-
-
± 2.2%
Horizontal R/E Precision (400mm)
Applicable for 201 - 400%
± 2.0%
-
-
± 3.3
Linearity (Vertical) 400mm span
± 0.7 mm
-
± 0.9 mm
Linearity (Horizontal) 280mm span
± 0.6 mm
-
± 0.6 mm
Linearity (Diagonall) 280mm span
± 0.7 mm
-
± 0.7 mm
* For paper <260mm long and <128 g/m2
** Add magnification variation for Trail and Side Edge
Effect of paper shrinkage due to environmental changes are not included.

13
Maximum Image Sizes
The Color C60/C70 will reproduce A3 full bleed when printing on SRA3 paper.
Copy
Max. Imageable Area
Guaranteed Image
Quality Area
297mm x 432mm
297mm x 432mm
Print
Max. Imageable Area
Guaranteed Image
Quality Area
323mm x 480mm
317mm x 480mm

14
Copy/Print Speed
The Color C60/C70 can run a maximum paper weight of 300gsm Speed through the printer is dependent upon paper size
and weight and is reflected in the table below.
The continuous print speeds shown in table below are for feeds from Trays 1 –4. Speed from Bypass Tray (5) will be
reduced by 10-20%. The control panel will allow you to select 60gsm stock, however, printing on stock below 64gsm the
printed results are not guaranteed.
Productivity in these charts are based on images per minute (ipm), not prints per minute.
LEF = Long edge feed; SEF = Short edge feed
Color C60
Color C70
Size
Weight
Colour (ipm)
B/W (ipm)
Colour (ipm)
B/W (ipm)
A4 LEF (8.5x11)
Plain, (64gsm –128gsm)
60
65
70
75
A3 (11x17)
Plain, (64gsm –128gsm)
30
33
35
37
SRA3 (12 x 18)
Plain, (64gsm –128gsm)
27
29
30
33
A4 (8.5x11) (Tray 5)
Transparency
18*
40
18*
40
A4 (8.5x11) LEF
Heavyweight 1 (129gsm –176gsm)
43
65
50
75
A3 (11x17)
Heavyweight 1 (129gsm –176gsm)
21
33
25
37
SRA3 (12 x 18)
Heavyweight 1 (129gsm –176gsm)
19
29
19
33
A4 (8.5x11) LEF
Coated 1(106gsm –150gsm)
43**
43**
50**
50**
A3 (11x17)
Coated 1(106gsm –150gsm)
21
21
25
25
SRA3 (12 x 18)
Coated 1(106gsm –150gsm)
19
19
19
19
A4 LEF (8.5x11)
Heavyweight 2 (177gsm –220gsm)
30
43
35
50
A3 (11x17)
Heavyweight 2 (177gsm –220gsm)
14
21
17
25
SRA3 (12 x 18)
Heavyweight 2 (177gsm –220gsm)
12
19
12
19
A4 LEF (8.5x11)
Coated 2 (177gsm –220gsm)
30
30
35
35
A3 (11x17)
Coated 2 (177gsm –220gsm)
14
14
17
17
SRA3 (12 x 18)
Coated 2 (177gsm –220gsm)
12
12
12
12
Tab Stock 1 A4 (Tray 5)
Pre-cut Tabs (106gsm –176gsm)
24
35
24
35
Tab Stock 2 A4 (Tray 5)
Pre-cut Tabs Heavyweight
(177gsm –220gsm)
17
24
17
24
Envelopes
Envelopes (A4)
22
22
22
22
*With finisher (9/9 ipm w/o)
**With finisher (35 ipm w/o)
Media heavier than 220 gsm is required to be fed through Tray 5 or the optional OHCF.
Image Quality adjustments can decrease productivity during a run, Finisher options may also impact productivity.
Paper / Throughput
Centreline stock is the recommended paper to maximise image quality and product reliability
This paper is specifically designed to maximise image quality and machine performance over a wide range of
environmental conditions. Unless otherwise specified, all references to media capacity and performance in this document
are based on this paper.
•Using coated (e.g., glossy, matte coated or photo finished / proofing) and/ or extra heavyweight (i.e., >176 gsm ) stock
may result in degraded reliability performance for the Color C60/C70. Customers using these materials exclusively or
extensively will see decreased performance as it relates to image quality and product reliability.
•Attempts to feed heavier than recommended paper stocks, and/or misuse of the media settings, may cause machine
damage or poor image quality. Using media at run modes other than that recommended for the grade may cause poor
image quality and serious machine damage.
•Environmental conditions may require that coated paper be fed one at a time through Tray 5 (Bypass). Relative
Humidity greater than 40% could cause multi-feeds. Output may require removal at 25 sheets in the tray when not
using a finisher. Gloss variation can occur from machine rolls, especially on high area coverage prints. The optional OHCF
C1-DS is recommended for high humidity (>40%) environments.
•The system does not prohibit running coated substrates from the internal trays (Trays 1-4); however, there can be a
significant increase in jams or multi-feeds. If large quantities of coated paper are to be run, the OHCF is recommended
for paper feeding.
•The maximum print/copy speed for the system is determined by the process speed of the Color C60/C70 engine; image
quality adjustments are done frequently to maintain consistent IQ.
•As a printer / copier, the Color C60/C70 is a document printer; therefore, in reverse order (faceup) printing the print
engine will not cycle up until the entire job is ready. This will impact First Copy Out Time (FCOT). The printer may cycle
down between each job depending on job complexity.

15
•When printing, overall system performance (‘Click to Clunk’ time) is primarily dependent upon the software applications
and network environment being used. Rasterising (RIP-ing) is only a small fraction of Click to Clunk time.
•If the requested finishing is outside machine capabilities, jobs may be held at the print server or outputted to the finisher
top tray.
•The system does not prohibit duplexing coated and heavyweight 2 substrates; however, there may be an increase in
jams. If problems occur, switch to manual duplex.
•If the adjustment arms are disturbed while re-loading paper in Tray 5, the paper size setting will return to default and
cause the job to stop until the paper size setting is corrected by the user.
•If the paper is changed while the machine is in Sleep Mode, the machine may not register the change in paper size. If
this occurs, first open the side paper guide to the largest size, close and re-open the tray, then adjust the side paper
guide to the correct size.
•Tray 5 cannot specify “Paper Colour”of paper loaded, its value is always set as “White”regardless of paper colour loaded.
Print Engine transmits “Paper Colour”value as “White”to the Print Server. Therefore “White”may be set as “Paper
Colour”in printer driver of Print Server,e.g. When choosing “Transparency “as “Paper Type”setting using FFPS printer
driver, “Paper Colour”is set to “Clear”automatically, which leads to a mismatch between Print Engine and Print Server
setting values. In this case, you can print when “Paper Colour”setting is changed to “White”.
•Attempts to feed heavier than recommended paper stocks, and/or misuse of the media settings, may cause machine
damage or poor image quality. Using media at run modes other than that recommended for the grade may cause poor
image quality and serious machine damage.
•Paper from all trays is printed topside first. When loading paper either in Tray 1, 2 or 3, please load paper so that the
side 1 is faced down in the tray. On the other hand, when loading paper in a tray of A4 High Capacity Feeder, or OHCF,
please place paper so that side 1 is faced up in the tray. It is recommended that Fuji Xerox branded paper be loaded
with ream wrapper seam-side up.
•Depending on properties of paper used, such as paper weights or type, runnability and image quality may vary.
•Depending on a paper used, the frequency of jam or multi-feed may increase. Following the steps below may decrease
the frequency.
−Fan the sheets before loading them in a tray.
−Invert the sheets vertically when loading them in a tray.
−Change paper-feeding-direction (long edge feed or short edge feed) when loading them in a tray.
−Invert front and back side of the sheets when loading them in a tray.
•Manufacturers of coated stock do not recommend use of their media when the ambient relative humidity exceeds 60%.
Relative humidity greater than 40% may increase multi-feeds from Trays 1- 5.
•The Color C60/C70 is designed to run various kinds of medias; however, specific media may result in curl, which can be
corrected using the internal de-curlers on the optional Interface Module (IFM) and optional Finisher D4.
•Colour to Colour mis-registration may vary outside of the specification when using heavyweight papers.
•The Color C60/C70 printer may not output a print for a few seconds to adjust paper feeding timing when running a job
with mixed media sizes.
•Copy speed may be significantly lowered when running a booklet-finished-job.
Non-standard Paper Size Support
The Color C60/C70 supports non-standard paper sizes. However, due to rounding and unit-conversions that occur in the
client applications, print server, and printer, some mismatch may occur between the paper size entered at the application,
and the paper size that must be entered at the printer. The operator may need to adjust the entered paper dimensions by
up to 2.5 mm in order for the printer to detect that the requested paper size has been loaded. In addition, the printer
interprets some paper sizes included in the PPD (PostScript Printer Description) as non-standard sizes.
Supported Paper Types
Every effort has been made to ensure that the Color C60/C70 supports a broad range of media. Keep in mind, however,
that using only Fuji Xerox recommended media maximises reliability and paper-handling performance.
Typically, heavy weight papers exhibit increased variability of formation, surface smoothness and stiffness, which may
result in degraded image quality.
Also refer to “Product Limitations” & “Recommended Paper”
Recommended Paper
Refer to the Recommended Materials list, available from your Fuji Xerox representative, for optimum media selections
(this resource is also available online at www.xeroxsupplies.com.au).
Storage
The recommended storage conditions for all paper supplies are 20C to 23C at 45%-55% relative humidity. Papers stored
or used outside the recommended environment are likely to affect the image quality output. Paper should always be
stored in sealed packs, on shelves located in a work place that is consistently controlled at the recommended environment
stated above.
Warm up time
IOT warm up time: 90 seconds or less, at a room temperature of 20°C
From a cold boot to the “All Services” screen ready, may take up to 3 minutes.

16
Duplex (2-sided) Copying / Printing
Automatic duplexing on media up to 220 gsm* can be performed from all trays.
Maximum Auto Duplex Support
Copy/Print mode
Coated/Uncoated
Copying
256gsm
Printing via EFI/FFPS servers,
or other print drivers(MMD2 print driver
or model-specified drivers)
220gsm
For 221-256gsm, copying results are not fully guaranteed. It is dependent on the media type.
Auto duplex printing can be set up to 220 gsm coated and uncoated, however results and performance are subjected to
Customer testing media prior to running a job.
SRA3 auto duplex up to 176gsm (coated and uncoated)
A3 auto duplex 176gsm (coated) and 220gsm (uncoated)
Manual duplexing can be performed on media up to 300gsm from Tray 5 (Bypass) and the optional OHCF. (Note: Image
quality degradation is possible above 220gsm).
As with any copier or printer, duplex performance is not expected to match the performance for single-sided copying.
Paper jam rates may be higher than the rate you will experience for the same throughput material in single-sided mode.
Transparencies
The specific premium transparency is available for use. Please contact your local Fuji Xerox Representative to order the
transparency. Transparencies are supported out of all internal trays, Tray 5 (Bypass), and Trays 6-7 (OHCF) if fed in the
correct manner. This premium transparency is specifically designed to provide optimum copy quality.
Use of other transparencies may cause machine damage and result in excessive service calls.
SIQA- (Simple Image Quality Adjustment toolset)
To achieve improved registration results with paper other than centerline paper, Fuji Xerox recommends that you use the
Simplified Image Quality Adjustment (SIQA) tool to create custom media profiles for a specific tray and paper type, this
will improve the front to back registration alignment.
This additional registration tool allows service or users to easily create profiles. The tool can also be used to make
Density adjustments inboard/outboard (SMILE Correction) and Image transfer (Transfer Voltage) value.
SIQA is software that should be installed on a Windows PC by the customer.
Therefore, the software can be installed in the Windows Client PC as well as EX Print Server. Please note that it cannot be
installed in the Integrated EXi Print Server (Linux OS).
Front to back registration alignment can only support media size 182x182mm or larger.
Users need to operate SIQA in the System Administration mode.
Paper Tray Capabilities
Tray #
Size
Capacity (using
90gsm Paper)
Specified Weights & Comments
#1 & 2
A5 SEF or 5.5” x 8.5”*
B5 SEF
A4 SEF, LEF
B5 LEF or 7.25” x 10.5” LEF**
B4 SEF
A3 SEF
11” x 17” SEF
12” x 18” SEF ***
SRA3 SEF ***
13”x 18”SEF***
500 sheets
Normal Weight (bond/plain): (64 –105gsm)
Heavyweight 1: (106–176gsm)
Coated 1: (106-150gsm)
Heavyweight 2: (177 –220gsm)
Coated 2: (151 –220gsm)
Min paper size: A5 SEF
Max paper size: SRA3 SEF (Tray 1 only)
A3 SEF (Tray 2)
64-220gsm stocks recommended
When feeding 177-220 gsm paper and/or coated stock it is
highly recommended to feed from tray 5 (Bypass) or trays 6/7
(HCF) due to degraded feeding performance of these papers
through trays 1-4. The control panel will allow you to select up

17
to 256gsm, however printed results above 220gsm are not
guaranteed.
#3 & 4
B5 LEF or 7.25”x10.5”LEF**
A4 LEF
870 (Tray 3)
1140 (Tray 4)
Stock weights the same as Trays 1 & 2
Min paper size: B5 LEF
Max paper size: A4 LEF
The control panel will allow you to select up to 256gsm,
however printed results above 220gsm are not guaranteed.
#5
(Bypass)
A6 SEF
B6 SEF
A5 SEF
B5 SEF,LEF
A4 SEF, LEF
B4 SEF
A3 SEF
11” x 17” SEF
12” x 18” SEF
SRA3 SEF
13“ x 19“ SEF
250 sheets
Same as Trays 1 –4 with additional 221 –300 gsm capability.
Min paper size: 100 x 148 (Postcard)
Max paper size: SRA3
#6
A4 HCF
(Option)
B5 LEF
A4 LEF
7.25”x 10.5” LEF
8.5” x 11” LEF
2000 sheets
Stock weights the same as Trays 1- 4
Min paper size: B5 LEF
Max paper size: A4 LEF
#6 & 7
OHCF
(Option)
Minimum B5 LEF
Maximum SRA3/ 13” x 19”
2000 sheets per tray
Stock weights are the same as Trays 1 –4 with additional 221
–300 gsm capability.
* The combinations of 5.5” × 8.5” SEF, A5 SEF, and B5 LEF cannot be loaded in different trays in one machine
** B5 LEF and Executive 7.25” x 10.5” cannot be loaded into the same tray.
*** Supported by Tray 1 only.
Document Handler
Item
Specification
Document Feed Type:
Duplex Automatic Document Feeder
Document Size
Min: A5 - Max: A3
Paper Weight
38-200gsm (When duplexing: 50-128gsm)
Capacity (90gsm)
250 sheets
Feeding Speed A4 LEF in simplex copy mode
Monochrome: up to 80 ipm, Colour: 75 ipm (A4 LEF)
Billing Meters
An automated meter capture service is available for customers with a Fuji Xerox Australia Support Services Agreement
(SSA). This service assists customers with convenient, accurate billing by eliminating the need for manual meter read
submission for each device. It is included as a standard part of support for customers with devices and networks
compatible with Fuji Xerox meter capture technology.
If your device or network is not compatible with our meter capture technology, you will be required to manually submit
your meter readings for billing purposes. The billing counters can be viewed on the control panel display screen.
Item
Description
Reported
Note
Meter 1
Colour Impressions
Yes
Total output for all color copies/prints regardless of paper size.
Meter 2
Black Impressions
Yes
Total output for all black & white copies/prints regardless of paper size.
Meter 3
Colour Large
impressions
Yes
Total output for all colour prints / copies larger than 297mm x 400mm.
Meter 4
Black Large
impressions
Yes
Total output for all black prints / copies larger than 297mm x 400mm.
Meter 5
Total Impressions
No
For Customer information only.

18
Auditron Function
The Color C60 / C70 engine has the following built-in Auditron features:
Auditron functionality only applies to Copy Mode
Item
Specification
User Access Restriction
Depends on Colour Server Functionality (1000users)
Number of Sheets
Depends on Colour Server Functionality (1000users) Upper bound: 9,999,999
Billing Meter Information
Depends on Colour Server Functionality Print Engine UI
Cost Recovery
EPSV (Electronic Partnership Supervisor)
The EPSV is currently supported on Color C60/ C70 with Integrated Fiery controller and connection to Equitrac systems
only.
Since the Color C60 and C70 with Integrated Fiery controller are designed for production environments, there are
limitations when connecting to external cost recovery systems.
•Black and white pages on the Equitrac server will count as colour for RGB and CMYK gray files
•Equitrac will record jobs that have incorrect property settings and have been suspended by the Integrated
Fiery Controller after a certain time. Fiery Command Work Station (CWS) is required to release the job.
•Only 1 printed job is kept on the Integrated Fiery Controller.
•Reprinting the job using CWS will not be tracked by the Equitrac Server.
•A Printer that is setup on the Equitrac server that does not use the Equitrac port will not be tracked.
•When installing the printer using the Equitrac port, all the colour management features of the Integrated
Fiery are disabled. Therefore color output may not be as accurate as expected.
The Equitrac Customer Expectation Document should be read in conjunction with this information.
A Fuji Xerox Analyst can assist with questions relating to Color C60 / C70 and Cost Recovery.
Envelopes
The C60/C70 currently supports running the following envelope sizes through Tray 5. Depending on thickness, up to 50 envelopes can
be loaded. Envelopes can also be fed from HCF Trays 6 & 7 with the small media bracket (post card kit) installed. Stack heights in these
trays may need to be reduced if jams are encountered with various envelope types.
Envelope Type/Size
Feed Direction Flap Open
UI Tools Input
Monarch
98.4 X 190.5mm
LEF
Custom Paper Size
190.0mm X 170.0 mm
Commercial #10
104.8mm X 241.3mm
LEF
Custom Paper Size
240.0mm X 173.0 mm
Envelope: Chou-kei3
120.0mm X 235.0mm
SEF
Default Input Size when customized in tools
Envelope: Kaku-ga
240.0mm X 332.0mm
SEF
Default Input Size when customized in tools
Envelope C4
229.0mm X 324.0mm
SEF
Default Input Size when customized in tools
Envelope C5
162.0mm X 229.0mm
SEF
Default Input Size when customized in tools
**Note: Please be aware that envelopes are not intended to be a primary media for this product and should only represent a
very small percentage of monthly print volume.

19
Envelope Feeding Guidelines/Limitations:
•Envelope should be run using media type “heavyweight 2”, “face-up” selected.
•Envelopes should be run open flap to the left (trail edge) which provides the best wrinkle free results. It is not
recommended to run closed flap because it is more susceptible to wrinkles, creases, light image, and the flap
sealing during the run.
•North American envelopes will only run in Custom Size Mode with manually inputting the size indicated above.
These dimensions include a commercial style open flap (specific dimensions for the envelopes being used should
be entered, including flap size).
•Envelope Basis Weight must be between 75 to 90 GSM.
•Bypass tray can handle SEF stacks of 30 –50 envelopes.
•Stacking capacity in SCT varies from approx. 30 to 100 envelopes.
•Frequent jams or damage may occur with certain size envelopes & flap designs.
•Image Quality may be compromised when running various flap & seam designs.
•Maximum reliable LEF / flap open exit tray stack height is less than 10 envelopes.
•Maximum reliable SEF stack height in SCT is 30 –50 envelopes
•Other variables that can affect envelope feeding performance:
•Envelope brand, size, weight, and seam configuration.
•Flap design, size, and shape.
•Orientation of Flap in feed trays –Inboard or Outboard.
•Storage / environmental conditions, and age of envelopes.
•Output devices used.