Fuji Xerox DC900 User manual

DC900/1100 Quick Reference Guide_______________________________________________
_______________________________________________________________________________________________________
Reference No: Fuhji-0205-Rev01 Created by FXS CRO
Page 1 of 16
Page
Basic Copying
Reduce/Enlarge , Stapling , 2 Sided Copying 2
Image Quality Screen
Original Type, Lighten / Darken 4
Scan Options Screen
Bound Originals, Mixed Size, Edge Erase..Etc 5
Output Format Screen
Booklet Creations 7
Multiple Up
Annotation 8
Covers 9
Poster
Set Numbering 10
Folding (optional) 11
Transparency Separators 12
Repeat Image
Tab Copying 13
Stored Programming Screen 14
IC Printing
Setup Menu 15
Setup of Mailboxes
Billing Meter 16
Service : 6766-8888 ( press 1 )
Serial Nos : ……………………

DC900/1100 Quick Reference Guide_______________________________________________
_______________________________________________________________________________________________________
Reference No: Fuhji-0205-Rev01 Created by FXS CRO
Page 2 of 16
COPIER
Basic Copying Screen
Reduce / Enlarge %
Steps 1. Load Document
2. Reduce / Enlarge
3. More
4. Variable %
5. Enter desire %
6. Press Start
Odd Size Original to A4
Steps 1. Load Document on platen glass
2. Scan Options
3. Original Size
4. Input the X/Y axis using the measurement scale
5. Press Save
6. Basic Copying
7. Reduce / Enlarge
8. Select Auto %
9. Paper Supply
10. Select A4
11. Press Start

DC900/1100 Quick Reference Guide_______________________________________________
_______________________________________________________________________________________________________
Reference No: Fuhji-0205-Rev01 Created by FXS CRO
Page 3 of 16
Single sided to Double Sided Copying
Steps 1. Load Document
2. 2 Sided
3. Select 1 

2
4. Press Start
Double Sided to Double Sided Copying
Steps 1. Load Document
2. 2 Sided
3. Select 2 

2
4. Press Start
Double Sided to Single Sided Copying
Steps 1. Load Document
2. 2 Sided
3. Select 2 

1
4. Press Start
Stapling ( max 100 sheets )- Optional
Steps 1. Load Document
2. Select Finishing
3. Select Collated Stapling / Punching
4. Select the desire staple and hole punch position
5. Press Start

DC900/1100 Quick Reference Guide_______________________________________________
_______________________________________________________________________________________________________
Reference No: Fuhji-0205-Rev01 Created by FXS CRO
Page 4 of 16
IMAGE QUALITY SCREEN
Original Type
Steps 1. Load document
2. Image Quality
3. Original Type
4. Select desire mode : Text, Photo Text, Photo or Pencil Text
5. Press Save
Lighten / Darken
Steps 1. Load document
2. Image Quality
3. Lighten / Darken
4. Select desire copy density
5. Press Save

DC900/1100 Quick Reference Guide_______________________________________________
_______________________________________________________________________________________________________
Reference No: Fuhji-0205-Rev01 Created by FXS CRO
Page 5 of 16
SCAN OPTIONS SCREEN
Bound Originals
Steps 1. Load document
2. Scan Options
3. Bound Originals
4. Select Left page then to Right or Right page then left
5. Press Save
6. Press Start
Mixed Size Originals
Steps 1. Load document
2. Scan Options
3. Mixed Size Originals
4. Select On
5. Press Save
6. Basic Copying
7. Select desire paper size
8. Press Save
9. Press Start

DC900/1100 Quick Reference Guide_______________________________________________
_______________________________________________________________________________________________________
Reference No: Fuhji-0205-Rev01 Created by FXS CRO
Page 6 of 16
Edge Erase
Steps 1. Load document
2. Scan Options
3. Edge Erase
4. Select items :
Equal Opposite Edges, 4 Independent Edge or 4 Equal Edges
5. Select desire erase area
6. Press Save
7. Press Start
Mirror Image
Steps 1. Load document
2. Scan Options
3. Mirror Image/ Negative Image
4. Mirror Image
5. Select On
6. Press Save
7. Press Start
Negative Image
Steps 1. Load document
2. Scan Options
3. Mirror Image/ Negative Image
4. Negative Image
5. Select On
6. Press Save
7. Press Start
Image Shift
Steps 1. Load document
2. Scan Options
3. Image Shift
4. Select desire areas : Off, Auto Center or Variable Shift
5. Key in desire mm to be shifted ( max 50 mm )
6. Press Save
7. Press Start

DC900/1100 Quick Reference Guide_______________________________________________
_______________________________________________________________________________________________________
Reference No: Fuhji-0205-Rev01 Created by FXS CRO
Page 7 of 16
OUTPUT FORMAT SCREEN
Booklet Creations
Steps 1. Load Document
2. Output Format
3. Select Booklet Creation
4. Choose left bind / top bind
5. Select With or Without Covers
6. Press Save
7. Select Basic Copying
8. Select Paper Tray : A4 or A3 ( landscape only )
9. Press Start
Multiple Up
(Combine 2 or 4 pages onto 1 sheet of paper)
Steps 1. Load Documents
2. Select Multiple Up
3. Select 2 Up, 4 Up or 8 Up
4. Select the required layout order
5. Press Start

DC900/1100 Quick Reference Guide_______________________________________________
_______________________________________________________________________________________________________
Reference No: Fuhji-0205-Rev01 Created by FXS CRO
Page 8 of 16
Annotation
( Stamp, date and page number can be added to copy )
Steps 1. Load document
2. Output Format
3. Select Annotation
4. Select desire item
5. Press Save
6. Press Start
Note :
Stamp - On -Confidential, Copy prohibited, Urgent, Important, Circulation,
Side 2 recycled, Draft and Void
Date - On ( date added )
Page number - On ( page number is added )

DC900/1100 Quick Reference Guide_______________________________________________
_______________________________________________________________________________________________________
Reference No: Fuhji-0205-Rev01 Created by FXS CRO
Page 9 of 16
Covers
Steps 1. Load paper for the cover in any trays
2. Select Output Format
3. Select Cover
4. Select desire front cover
5. Select desire back cover
6. Select paper trays for body page and cover
7. Press Save
8. Press Start
Poster
Steps 1. Load document on the platen glass
2. Select Output Format
3. Select Poster
4. Select Output Size
5. Select desire output size
6. Select Paper Tray Settings
7. Press Start

DC900/1100 Quick Reference Guide_______________________________________________
_______________________________________________________________________________________________________
Reference No: Fuhji-0205-Rev01 Created by FXS CRO
Page 10 of 16
Set Numbering
Lightly print a sequential control number on the background of each copy set
Steps 1. Load document
2. Output Format
3. Select Set Numbering
4. Select On
5. Select Control number
6. Key in Starting nos.
7. Select desire item ( user account nos, date/time, serial nos )
8. Press Save
9. Press Start
Note :
Start number : 1 to 9999
Text : Display the ( set numbering –text )
User Account nos : User account is printed ( only when auditron is activated )
Date/Time : Print the dated and time that copying started
Serial number : The serial number of the machine is printed