Fuji Xerox DocuPrint CM315 z User instructions

Wifi Setup DocuPrint CM315 z
Connecting to
Setting up the
DocuPrintCM315 z
printer onawireless
network
DPCM315z_QSG_P1
the Wireless
Network
1WPS-PBC
Note: WPS-PBC (WPS Button), WPS-PBC (Operator Panel)
and WPS-PIN is only available when the wireless access
manual provided with the router.
point or router supports WPS-PBC. Please refer to the
Tap [Device] > [Network Settings] > [Wi-Fi] > [WPS].
2
(WPS Button)
Before starting WPS-PBC, confirm the position of the WPS
button on the wireless access point or router. Please refer to
the manual supplied with the router for more information.
1Press the button.
When the message “Push WPS Button on router” is
displayed, start the WPS-PBC on the wireless LAN
access point (router) within 2 minutes.
3
The printer restarts automatically to complete the
wireless LAN connection setting.
Ensure you have the name of your wireless
network (SSID), wireless network password,
security and encryption types.
To find the name and type of security
encryption of your wireless network on
your computer (example Windows 7):
a) Go to the Start Menu. Select Control
Panel and click on Network and
Sharing Centre .
b) Click on Manage Wireless Networks.
Double click on your preferred wireless
network. Note the SSID. Click on the
security tab. Note the security
encryption type.
Ensure you have connected the Wireless
LAN Adapter to the rear of the machine.
See over page for instructions.
Before you begin
Tap [Device] > [Network Settings] > [Wi-Fi] > [WPS].
2
1Press the button.
Tap [Connect via PIN].
Write down the eight-digit PIN code displayed on the
touch panel:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Make sure the message “Operate wireless router” is
displayed, and then enter the PIN code into the
wireless LAN access point.
3
2WPS-PIN
This procedure requires access to the WPS-PIN functions
of your wireless access point (WAP) or router.
For further information please refer to the documentation
supplied with your wireless access point or router.
The printer restarts automatically to complete the
wireless LAN connection setting.
http://onlinesupport.fujixerox.com/
Tap [Device] > [Network Settings] > [Wi-Fi].
2
Tap the desired access point.
If the desired access point doesn’t appear, proceed to
“Manual SSID Setup”.
4
3Tap [Wi-Fi Setup Wizard].
The printer searches
Enter the WEP key or passphrase.
If the encryption type of the selected access point is WEP:
a) Enter the WEP key using the keyboard, then tap [Next].
If the encryption type of the selected access point is WPA,
WPA2 or Mixed:
a) Enter the passphrase using the keyboard, then tap [Next].
5
The printer restarts automatically to complete the
wireless LAN connection setting.
1Press the button.
3Auto SSID Setup
Ensure you have the name of your wireless network (SSID),
wireless network password, security and encryption types.
For further information refer to
“Before you begin” at the start of this instruction.
.

Wifi Setup DocuPrint CM315 z
Connecting to
DPCM315z_QSG_P2
the Wireless
Network
Tap [Device] > [Network Settings] > [Wi-Fi] > [Wi-Fi Wizard Setup].
2
Enter the SSID using the keyboard, then tap [Next].
4
3Tap [Enter SSID].
Select the encryption type from [No Security], [Mixed Mode PSK],
[WPA2-PSK-AES] or [WEP].
If you do not set security for your wireless network:
a) Tap [No Security].
If you use [Mixed Mode PSK] or [WPA2-PSK-AES] encryption:
a) Tap [Mixed Mode PSK] or [WPA2-PSK-AES].
b) Enter the passphrase using the keyboard, then tap [Next].
If you use [WEP] encryption:
a) Tap [WEP].
b) Enter the WEP key using the keyboard, then tap [Next].
c) Tap the desired transmit key, then tap [Next].
5
The printer restarts automatically to complete the
wireless LAN connection setting.
Select the network mode from [Infrastructure] and [Ad hoc]
according to your environment, then tap [Next].
6
Attaching the Wireless LAN Adapter
1. Turn off the printer.
2. Push down on the latch of the wireless adapter socket cover, and then remove the cover.
3. Insert the connector of the wireless LAN adapter to the wireless adapter socket.
1Press the button.
4Manual SSID Setup
http://onlinesupport.fujixerox.com/
Do you know about the Fuji Xerox
Online Support Assistant?
24/7 access to a range of self help resources.
In a web browser go to:
http://onlinesupport.fujixerox.com/
1) Enter the product model number:
DPCM315dw
2) Choose the matching product
from the list.
3) Choose from a variety of tools.
- Self Help: A comprehensive knowledge
base of solutions, many with embedded
Customer Training Videos.
- Documentation: Downloadable User and
Admin Guides, Quick Start Guides etc.
- Drivers: Latest downloadable drivers.
Please subscribe to our YouTube Channel to
be notified each time we upload new videos!
Fuji Xerox TV
.
Fuji Xerox TV