For Sales Contact Information go to
www.Fujinon.com
PAN & TILT
HEAD SPECIFICATIONS
MODEL EPT-7G-H2A
Pan Range 300°
Pan Speed 25° / Sec.
Tilt Speed 20° / Sec.
Tilt Range +/- 95°
Stopping Accuracy +/- 10'
Lens Type MD
Acoustic Noise NC40db
Load Capacity 4 kg / 8.8 lbs.
Power Consumption DC 15V/30W
(max)
Operating Temperature 0° C ~ +45° C
Power Source 15V DC
(ESC-103K-04A)
Drive System DC Servo
Weight 2.3 kg / 5.06 lbs.
Dimensions WxDxH (mm) 130 x 102 x 222
Max. Cable Length 1350 m / 4430 ft.
* From power supply (CPS-401A-10DA) **EOP-102J-60B not available on CPT-70D-02A
PAN & TILT
CONTROLLERS
EOP-102J-30E EOP-102J-60B EOP-102J-70B
Operation
RS-485 via twisted pair cable – E-connector/RS-232 via DB-9 connector
Pan / Tilt
Variable-speed joystick
Zoom
Variable-speed rocker switch
Focus
Variable-speed potentiometer
Iris
Close, open, auto, remote
Shot Memory
32 32 per head 32 per head
Back-up
Reservable for more than 5 years (Lithium battery)
Qty of Head Control
144
Auxiliary Input
2 auxiliary relay contacts for controlling
accessory equipment at the pan and tilt head
Power Source
120 VAC via 12 VDC adapter (included)
Power Consumption
5 W
Camera Control
Camera On/Off
Shutter Speed
Gain Adjust, Color Bar
Auto White, Auto Black
Weight
Approximately 0.8 kg
A.
B.
C.
D.
E.
F.
H.
G.
I.
J. K.
L.
M.
N.
P.
Q. R.
O.
A. EOP-102J-30E
B. EOP-102J-60B
C. EOP-102J-70B
D. ESC-103K-04A
E. PS-470A-01A
F. UTB-219A-03A
G. CLH-8B
H. UTB-219A-02A/04A
I. UHD-344A-XXX
J. Communication Cable
Between EOP & ESC
K. UHC-335J-XXX
L. MX-462E-01A
M. MX-462E-02A
N. FTA-C10D
O. FPA-C10D
P. CMA-200A-01A
Q. FHTA-10 Tripod
Adapter
R. FH-10–High Hat
Mount
EOP-102J-70B
Aux.
1 & 2
2 Ch
Alternate
Page Button
Page x 8 shot
= 32 preset
Head Select (1–4)
(Available on
EOP-102J-60B/70B)
4 pin E-conn
RS-485
DB9(M)
RS-232
12V DC
External P/S
Supplied
Preset Buttons
32 Preset
(4 page x 8 shot)
Iris Control
Auto/Manual
Pan/Tilt
Control
Focus
Control
Memo
Button
Zoom
Control
CPT-70F/70D CONFIGURATIONS
S1-BA1
Single-Head Control System
S2-BA1
Multi-Head
Control
System
S2-CA1
Multi-Head
Control
System
w/ Camera
Control Function
PAN & TILT
COMPATIBILITY WITH EXISTING SYSTEMS
Compatibility with existing CPT-1A and EPT-5E systems
is possible by the utilization of certain adaptors. The
diagrams below depict some common configuration
scenarios.
PAN & TILT
EPT-7G-H2A CONFIGURATIONS
