Fujitsu FTP-627MCL353 User manual

1
FTP-627MCL353/354
FTP-627MCL353/354 #01 / #02
nOVERVIEW
The FTP-627 MCL Series are 24V driven high-speed printers
with a 2-inch paper width equivalent.
The FTP-627 MCL Series can be used for a variety of
applications, such as portable terminals, POS, banking
terminals, and measurement and medical equipment.
nHIGHLIGHTS
• Ultra compact
Height 26.4 mm, width 83.5 mm, depth 43.0 mm
• High speed printing
It can print at 100 mm/s (800 dotlines/s) maximum by using
Fujitsu's unique head drive control.
• Auto Cutter
Full cut type (#01) and partial cut type (#02) printers are
available.
• Easy paper setting
Our unique platen release mechanism allows a
wide paper route even if the printer is ultra-compact, so
paper can be easily inserted. Conventional auto loading is
also available.
• RoHS Compliant
24V DRIVEN, FTP-607 Series
2” HIGH SPEED THERMAL PRINTER
FTP-627MCL353

2
FTP-627MCL353/354
nPART NUMBERS
nSPECIFICATIONS
Part number FTP-627MCL353 #01/#02 / FTP-627MCL354#01/#02
Printing method Thermal-line dot method
Dot structure 384 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 48 mm
Number of columns ANK 32 columns/line (maximum 12 x 24 dot font)
Paper width 58 mm
Paper thickness 60 to 80 µ m (some paper in this range may not be used because of
paper characteristics)
Printing Speed Maximum 100mm/sec. (800 dot line/sec.)
Alphanumeric, kana: 159 types
International characters: 195 types
JIS Kanji (Kanji CG loaded board): about 6800 types
12 ×24 dots, (1.5 ×3.0 mm), 32 columns: ANK
24 ×24 dots, (3.0 ×3.0 mm), 16 columns: ANK
8 ×16 dots, (1.0 ×2.0 mm), 48 columns: ANK
16 ×16 dots, (2.0 ×2.0 mm), 24 columns: ANK
SpecicationsItem
Character types
Character, dimensions (W×H), number of
columns
Note: #01 is for full cut, #02 is for partial cut
rebmuNtraP
rettuChtiwmsinahcemretnirP
)epyttuclluf,noitresnirepaptnorf(10#353LCM726-PTF
)epyttuclaitrap,noitresnirepaptnorf(20#353LCM726-PTF
)bonktuohtiwepyttuclluf,noitresnirepapmottob(10#453LCM726-PTF
)bonktuohtiwepyttuclaitrap,noitresnirepapmottob(20#453LCM726-PTF
gnivirdrofISL )ylnoKNA(102UC726-PTF

3
FTP-627MCL353/354
nSPECIFICATIONS
*+5˚C to +40˚C printing density assurance rance.
metI noitacificepS
ecafretnI scinortneC/C232SRotsmrofnoC
rewoP
ylppus
daehtnirproF )kaepA2.2(A5.1,tnerrucegarevaCDV42
).ces/mm001:deepstnirp,%52:oitartnirp(
rotomroF mumixamA1,%5±CDV42
rettucroF mumixamA1,%5±CDV5
cigolroF ummixamA1.0,%5±CDV3.3 to 5.25
snoisnemiD rettuchtiwmsinahceM )HxDxW(mm4.62x0.34x5.38
thgieW rettuchtiwmsinahceM g021yletamixorppA
efiL
daeH
dradnatsruorednu(tod/seslupnoillim05:ecnatsiseresluP
mk05ecnatsidgnilevartrepap:ecnatsisernoisarbA;)snoitidnoc
)sselro%512.:oitartnirp(
rettuC stuc000,003
gnitarepO
tnemnorivne
*erutarepmetgnitarepO C˚05otC˚0
ytidimuhgnitarepO )noitasnednocon(HR%58ot02
erutarepmetegarotS )dedulcnitonrepap(C˚06+otC˚02-
ytidimuhegarotS )noitasnednocon(HR%09ot5
noitceteD
noitcnuf
erutarepmetdaeH
noitceted rotsimrehtybdetceteD
noitcetedkram/tuorepaP retpurretni-otohpybdetceteD
esaelernetalP hctiwsgnidilsybdetceteD
repapevitisneslamrehtdednemmoceR
repaPevitisneShgiH )repaPnoppiN(4E-SK05FT
:repapdradnatS -PTF,)repaPnoppiN(E-SK06FT
,)repaPijO(R501DP,)mm85(100UP020
)mm85(1070P020-PTF
repaPefiLmuideM ,)mm85(2010P020-PTF,1F-SK06FT
1-BBV022P,)repaPijO(R071DP
)repaPihsibustiM
repaPefiLgnoL 532-BFA,)repaPijO(N-R061DP
noppiN(R-JK05PT,)repaPihsibustiM(
)repaPnoppiN(AA022AH,)repaP
80.5 x 43.0 x 26.4 mm (WxDxH)
FTP-628MCL353 FTP-628MCL354

4
FTP-627MCL353/354
nDIMENSIONS
1. Printer mechanism
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specied).
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is
open.
FTP-627MCL354
FTP-627MCL353
80.5
38.6
58
+0
-1
(paper width)
26.4
1.2
(26.9)
32
29.5
11
(56.9)
at release
at close
(40.5)
(37.2)
45 degrees (cutter opening
and closing angles)
(75)
33.7
3 max.
45û (Cutter opening and
shutting angle)
58 +0
-1
(paper width)
at close
at release
(37.2)
(40.5)
38.6
32
29.5
11
(26.9)(75)
26.4
1.2
33.7
(67)
3 MAX
¿18
11.9
83.5±1

5
FTP-627MCL353/354
1. Connector (FPC) specication (CN4)
(1) Connector
Mechanical unit side: FPC connector
Remote side (housing site): 52610-3071 (made by Molex)
(2) Pin assignment on the mechanical side
M I
M I
M I
M I
oN langiS O/I stnetnoC
1 KHP — )edohtaC(retpurretniotohP
2 NESV I rosnesrepaprofylppusrewopdnuorG
3 EHP O )rottimE(retpurretniotohP
4 WS — hctiwsneponetalP
5 WS O hctiwsneponetalP
6 HV I
daehlamrehtrofylppusrewoP7 HV I
8 HV I
9 CN — detcennoctoN
01 KLC I kcolC
11 TAL I hctalatadtnirP
21 2BTS I 2ebortS
31 1BTS I 1ebortS
41 DNG —
daehlamrehtrofylppusrewopdnuorG
51 DNG —
61 DNG —
71 DNG —
81 DNG —
91 DNG —
02 HT O rotsimrehT
12 DDV — cigolrofrewoP
22 3BTS I 3ebortS
32 ID I niatadtnirP
42 HV I
daehlamrehtrofylppusrewoP52 HV I
62 HV I
72 AT
langisnoitaticxerotomgnippetS
82 AT
92 BT
03 BT

6
FTP-627MCL353/354
Platen unit
Thermal head
Motor
Sensor (Photo-
interruptor)
30,29, .....................2,1
Connector No
(FPC pin numbers)
FPC
Connect terminal:
surface side
2. Cutter (CN5)
Connector on control circuit side: B4B-PH-K-S (J.S.T. or equivalent)
.oN langiS O/I stnetnoC .oN langiS O/I stnetnoC
1 1WS - noitisoprettuC
hctiwstceted 2 2WS - noitisopemoH hctiwstceted
3 +M O rotomgnippetS
noitaticxelioc 4 -M O/I rotomgnippetS noitaticxelioc
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141 8630, Japan
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web: http://us.fujitsu.com/components/
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web: emea.fujitsu.com/components/
Asia Pacic
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
Fujitsu Components International Headquarter Ofces
©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its afliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its afliates reserve the right to change specications/datasheets without prior notice.
Rev. February 26, 2009.