Fujitsu ScanSnap iX100 Instruction Manual

1
iX100
Wi-Fi Connection Guide
P3PC-5222-03Z0

2
Contents
Before starting................................................................................3
Two types of wireless mode..............................................................................................3
Access Point Connect mode............................................................................................................... 3
Direct Connect mode.......................................................................................................................... 3
Deciding the connection environment of ScanSnap ..................5
Using ScanSnap at home.................................................................................................5
Sharing ScanSnap with additional computers ..................................................................6
Using ScanSnap on the road............................................................................................6
Using a mobile router........................................................................................................7
Using ScanSnap both at home and in office.....................................................................8
Connecting ScanSnap by switching to Direct Connect Mode .10
When the registered wireless access point is not detected ............................................10
When the registered wireless access point is detected ..................................................11
Changing the settings after connecting to ScanSnap..............12

3
Before starting
Two types of wireless mode
ScanSnap can be connected to a computer or mobile device via either of the following Wireless modes.
Access Point Connect mode
If you can connect a computer or mobile device to a wireless access point, you can connect ScanSnap
via the same wireless access point.
In the following cases, you cannot connect ScanSnap in Access Point Connect mode. In such case, try
to connect ScanSnap in Direct Connect mode.
- When you cannot connect to the wireless access point because the wireless LAN environment
is unknown.
- When the communication is interrupted though you connect ScanSnap to the wireless access point.
- When you cannot disable a privacy separator function of the wireless access point because it exists in
a public wireless LAN environment such as an airports.
- When you are in a security protected wireless network where the wireless devices cannot
communicate mutually.
Direct Connect mode
You can connect ScanSnap directly via the wireless LAN if there is no wireless access point, or a
computer or mobile device cannot be connected to the wireless access point. Once the wireless mode
switches to the Direct Connect mode, ScanSnap will broadcast SSID in place of the wireless access
point. You can use ScanSnap in Direct Connect mode by connecting a computer or mobile device to
the SSID of the ScanSnap via Wi-Fi. However, you cannot establish internet connection or connection
between devices because there is no wireless access point function in ScanSnap.

4
Priority sequence of Wireless mode
The priority sequence of the wireless mode at the time when a computer or mobile device is connected
to ScanSnap is as follows:
1 Access Point Connect mode
2 Direct Connect mode
If a wireless access point has already been registered to ScanSnap, the ScanSnap searches the
registered wireless access point first when connecting in Access Point Connect mode. When the
wireless access point cannot be detected, the ScanSnap switches to Direct Connect mode. Once the
wireless mode is switched to Direct Connect mode, the ScanSnap does not switch back to Access Point
Connect mode even if the registered wireless access point is found. In order to connect inAccess Point
Connect mode, turn OFF the ScanSnap, and turn it ON again.
Hint
You can select the wireless mode to either Access Point Connect mode or Direct Connect mode with
ScanSnap Wireless Setup Tool. Refer to below for more details.
How to change the setting after connecting ScanSnap
How to change the setting after connecting ScanSnap

5
Deciding the connection environment
of ScanSnap
The connection method between ScanSnap and a computer or mobile device differs depending on the
connection environment. Refer to the connection method after deciding the connection environment.
Using ScanSnap at home
This is the connection method for when using ScanSnap in Access Point Connect mode at home or in an
environment where a wireless LAN network is available.
Connecting to a computer
Please see below for details.
How to connect ScanSnap to one computer via the wireless access point
How to connect ScanSnap to one computer via the wireless access point
Connecting to a mobile device
You need a computer to connect ScanSnap to the wireless access point. Please see below for
details.
How to connect ScanSnap to a mobile device via wireless access point
How to connect ScanSnap to a mobile device via wireless access point

6
How to connect ScanSnap to a mobile device via wireless access point
How to connect ScanSnap to a mobile device via wireless access point
Sharing ScanSnap with additional computers
Use one of your computers to connect ScanSnap to the wireless access point. Please see below
for details.
How to connect ScanSnap to one computer via wireless access point
How to connect ScanSnap to one computer via wireless access point
Using ScanSnap on the road
This is the connection method when using ScanSnap in Direct Connect mode in an environment (e.g.
outdoors) where a wireless LAN network is not available. When using ScanSnap in a public facility
where a public wireless LAN is available to use (e.g. airport), connect ScanSnap in Direct Connect mode
because the privacy separator function of the wireless access point cannot be disabled.
Connecting ScanSnap to a computer
Please see below for details.
How to connect ScanSnap to a computer directly
How to connect ScanSnap to a computer directly

7
Connecting ScanSnap to a mobile device
Please see below for details.
How to connect ScanSnap to a mobile device directly
How to connect ScanSnap to a mobile device directly
Using a mobile router
This is the connection method for when using ScanSnap via a mobile router as the wireless access point.
In this connection, you need to disable the privacy separator function prior to use. Please see below for
details.
How to use a mobile router
Please see below when connecting ScanSnap to a computer via a mobile router.
How to connect ScanSnap to one computer via wireless access point
How to connect ScanSnap to one computer via wireless access point
Please see below when connecting ScanSnap to a mobile device via a mobile router.
How to connect ScanSnap to a mobile device via wireless access point
How to connect ScanSnap to a mobile device via wireless access point
How to connect ScanSnap to a mobile device via wireless access point
How to connect ScanSnap to a mobile device via wireless access point

8
Using ScanSnap both at home and in office
This is the connection method when using ScanSnap in different places. You can use ScanSnap which
you are using at home in another place where the wireless LAN environment is available, such as
offices.
When connecting to the new wireless LAN environment with own
computer and ScanSnap
You can connect ScanSnap to a computer via the wireless access point either at home or in office.
When connecting ScanSnap in the office, use the wireless setting wizard of the ScanSnap Wireless
Setup Tool. Please see below for details.
How to connect ScanSnap to one computer via wireless access point
How to connect ScanSnap to one computer via wireless access point
When connetcting to the new wireless LAN environment with own
ScanSnap only
Connect ScanSnap to a computer via the wireless access point. Please see below for details.
How to connect ScanSnap to one computer via wireless access point
How to connect ScanSnap to one computer via wireless access point
Connect ScanSnap to the wireless access point in the office first, and then connect ScanSnap to
the office computer via the wireless access point. Please see below for details.
How to use a different computer to connected to ScanSnap
How to use a different computer to connected to ScanSnap

9
When connecting to the new wireless LAN environment using own
ScanSnap and mobile device
See below for details.
How to connect ScanSnap to a mobile device via wireless access point
How to connect ScanSnap to a mobile device via wireless access point
How to connect ScanSnap to a mobile device via wireless access point
How to connect ScanSnap to a mobile device via wireless access point

10
Connecting ScanSnap by switching to
Direct Connect Mode
This is the connection method for when switching to Direct Connect mode after connecting ScanSnap in
Access Point Connect mode either at home or in an office.
When the registered wireless access point is not
detected
ScanSnap switches to Direct Connect mode automatically if a wireless access point which has been
previously configured in ScanSnap cannot be detected.
To connect to a computer directly
Please see below for details.
How to connect ScanSnap to a computer directly
How to connect ScanSnap to a computer directly
To connect to a mobile device directly
Please see below for details.
How to connect ScanSnap to a mobile device directly
How to connect ScanSnap to a mobile device directly

11
When the registered wireless access point is
detected
When a wireless access point that has been previously configured in ScanSnap is detected, the wireless
mode changes automatically to Access Point Connect mode. Change the setting manually if the Direct
Connect model is preferred.
Connecting ScanSnap to a computer
Refer to below for details.
How to connect ScanSnap to a computer directly
How to connect ScanSnap to a computer directly
Connecting ScanSnap to a mobile device
Refer to below for details.
How to connect ScanSnap to a mobile device directly
How to connect ScanSnap to a mobile device directly
How to connect ScanSnap to a mobile device directly
How to connect ScanSnap to a mobile device directly

12
Changing the settings after connecting
to ScanSnap
The following settings can be configured with ScanSnap Wireless Setup Tool after ScanSnap is
connected to the computer/mobile device. The ScanSnap Wireless Setup Tool is included in ScanSnap
Manager.
To set the wireless mode fixed to Access Point Connect mode or Direct Connect mode
To use a different computer for Wi-Fi connection
To use a different wireless access point to connect to the ScanSnap
To change the password to connect to the ScanSnap
Please refer to below for details.
How to configure the settings after ScanSnap is connected
How to configure the settings after ScanSnap is connected