Fujitsu Airstage UTY-DCGYZ1 User manual

UT Y- DCGYZ1
UT Y- DCGGZ1
PART NO. 9378379206-03
[Original instructions]
OPERATING MANUAL
CENTRAL REMOTE CONTROLLER
KEEP THIS MANUAL FOR FUTURE REFERENCE

En-2
1. INTRODUCTION
1-1. Safety Precautions .......................... 4
1-2. System Outlines............................... 5
1-2-1. Features of This System ................................ 5
1-2-2. Remote Controller Group and
Address Setting.............................................. 6
1-3. SystemConguration ..................... 7
1-4. GeneralUsage.................................. 8
1-4-1. Name of Part.................................................. 8
1-4-2. GeneralScreenSpecication......................... 9
1-5. InitialSetting .................................. 12
2. CONTROL
2-1. MonitoringScreen ......................... 13
2-1-1. Change Items Setting................................... 16
2-2. OperationSetting........................... 16
2-2-1. Batch Setting................................................ 16
2-2-2. Individual Setting.......................................... 17
2-3. ScheduleSetting............................ 19
2-3-1. Schedule Detail Setting................................ 20
2-3-2. Timer Detail Setting...................................... 21
2-3-3. Batch Day Off............................................... 24
3. SETTING
3-1. GroupSetting................................. 26
3-1-1. Group Setting............................................... 26
3-2. Preference ...................................... 27
3-2-1. Backlight Setting .......................................... 27
3-2-2. Panel Calibration.......................................... 27
3-2-3. Sound Setting............................................... 28
3-2-4. Date Setting ................................................. 28
3-2-5. Password Setting ......................................... 30
3-3. Maintenance ................................... 31
3-3-1. Error History................................................. 31
3-3-2. Display Sensor Values ................................. 31
3-3-3. Information ................................................... 32
3-4. InstallerSetting.............................. 33
3-4-1. Language Setting......................................... 33
3-4-2. Central Controller Address Setting............... 33
3-4-3. Indoor Unit Registration .............................. 34
3-4-4. Temp. Unit Setting........................................ 36
3-4-5. Remote Setting ............................................ 36
3-4-6. External Input Setting................................... 37
3-4-7. Mail Setting .................................................. 38
3-4-8. Timer Setting................................................ 39
3-4-9. Initialization .................................................. 40
4. REMOTE CONTROL OPERATION
4-1. RemoteOperationSetting ............ 42
4-2. Monitor............................................ 42
4-2-1. Monitoring screen......................................... 42
4-2-2. Operaion ...................................................... 43
4-3. ChangePassword.......................... 43
4-4. Unit display order .......................... 43
4-5. EnvironmentSetting...................... 44
5. TROUBLESHOOTING
5-1. Error ................................................ 45
5-2. EmergencyStop ............................ 46
5-2-1. When a signal is received from
external input................................................ 46
5-2-2. When a signal is received from
VRF system.................................................. 46
5-3. Error Code ...................................... 46
6. SPECIFICATIONS
Contents

En-3
License
• For the screen display, this product uses a Bitmap font made and developed by Ricoh Company, Ltd.
• Cypherbridge_Systems_SLA_ Copyright
Copyright (C) 2009-2018 Cypherbridge Systems, LLC.
All Rights Reserved.
www.cypherbridge.com
Portions of this work may be based on third party contributions.
CypherbridgeSystemsLLCreservescopyrightstothisworkwhoselicensetermsaredenedunderaseparate
Software License Agreement (SLA). Re-distribution of any or all of this work, in source or binary form, is prohibited
unless authorized by Cypherbridge Systems, LLC under SLA, which governs the terms and conditions for use.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Portions based on XySSL Copyright (C) 2006-2008 Christophe Devine
Copyright (C) 2009 Paul Bakker <polarssl_maintainer at polarssl dot org> All rights reserved.
Redistributionanduseinsourceandbinaryforms,withorwithoutmodication,arepermittedprovidedthatthe
following conditions are met:
Redistributions of source code must retain the above copyright notice, this list of conditions and the following
disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
Neither the names of PolarSSL or XySSL nor the names of its contributors may be used to endorse or promote
productsderivedfromthissoftwarewithoutspecicpriorwrittenpermission.
Portions based on MBEDTLS
Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
SPDX-License-Identier:Apache-2.0
Distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied.
You may obtain a copy of the Apache License at http://www.apache.org/licenses/LICENSE-2.0

En-4
1. INTRODUCTION
1-1. Safety Precautions
●The “Safety Precautions” indicated in the manual contain important information pertaining to your safety.
Be sure to observe them.
●For details of the operation methods, refer to the manual.
●Request the user to keep the manual on hand for future use, such as for relocating or repairing the unit.
WARNING
This mark indicates procedures
which, if improperly performed,
might lead to the death or serious
injury of the user.
• In the event of a malfunction (burning smell, etc.),
immediately stop operation, turn off the electrical
breaker, and consult authorized service personnel.
• Do not repair or modify any damaged cable by
yourself. Let the authorized service personnel to do it.
Improperworkwillcauseanelectricshockorare.
• When moving, consult authorized service personnel
for uninstallation and installation of this unit.
• When disposing, consult an authorized service
representative.
• When disposing of the product is used, be based on
national regulations, properly processed.
• Do not touch with wet hands. It may cause an electric
shock.
• If children may approach the unit, take preventive
measures so that they cannot reach the unit.
• Do not repair or modify by yourself. It may cause a
fault or accident.
• Donotuseammablegasesneartheunit.Itmay
causearefromleakinggas.
CAUTION
This mark indicates procedures
which, if improperly performed,
might possibly result in personal
harm to the user or damage to
property.
• Do not set vessels containing a liquid on this unit.
Doingsowillcauseheating,reorelectricshock.
• Do not expose this unit directly to water. Doing so will
cause trouble, electric shock or heating.
• Dispose of the packing materials safely. Tear and
dispose of the plastic packing bags so that children
cannot play with them. There is the danger of
suffocation if children play with the original plastic
bags.
• Do not place electrical devices within 1 meter of this
unit. It may cause malfunction or failure.
• Donotuserenearthisunitorplaceaheating
apparatus nearby. It may cause malfunction.
• Do not touch the switches with sharp objects. Doing
so will cause injury, trouble, or electric shock.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. Children should
be supervised to ensure that they do not play with the
appliance.

En-5
1-2. System Outlines
1-2-1. Features of This System
• This Central remote controller is a management device to perform the centralized control of VRF2 system. This Central
remote controller can control 100 indoor units and 100 outdoor units. (hereafter called “this controller”)
• This controller can monitor the air conditioners (indoor units and outdoor units) by acquiring their sensor value.
• The batch operation / batch stop signal or emergency stop signal can be input by external input. Or operation/stop status
signal or abnormal/normal status signal can be output by external output.
• This controller can be controlled remotely using tablet, etc. by the remote connection of wired LAN.
E
A
B
C
D
F
Tablet
Remote monitoring / operation
•ON/OFF
•Operation mode
•Set temperature, etc.
Operation / abnormal
display equipment,
building central monitoring
equipment, etc.
Forced stop button,
re-alarmsystem,etc.
Outdoor units
Multi languages import
Firewall
External input and
output (Di/Do)
Wired LAN
Indoor units
Indoor units
Smartphone
Router
Operation / Stop status signal output
Abnormal / normal status signal output
Batch operation / stop signal input
Emergency stop signal input
Central remote
controller
Name Description
AExternal input and output to general-
purpose equipment
External input from general-purpose equipment to VRF system (batch
operation/stop, emergency stop) is enabled. Or external output from VRF
system to general-purpose equipment (operation/stop signal, normal/
abnormal signal) is also enabled.
B VRF System
This is all of the indoor units, outdoor unit as well as those of relevant
control equipment (Central remote controller, standard remote controllers)
that are connected with the same transmission cable.
CCentral remote controller:
The Central remote controller is a remote controller that allows centralized
control of multiple indoor units. A Central remote controller can control
the operation of the indoor units and timers in 3 units: All, Group and
Individual. Moreover, 1 Central remote controller can control up to 100
indoor units and 16 groups.
DRefrigerant system
This is a system that is composed of indoor units, outdoor unit as well as
those of relevant control equipment. All of the units and the equipment are
connected with pipes with the same refrigerant.
ERemote control operation This controller can be controlled remotely using tablet, etc. by the remote
connection of wired LAN. For details, refer to Chap. 4.
FLanguage importance
• Standard installed languages (12 languages): English, Spanish,
German, French, Italian, Russian, Portuguese, Turkish, Polish, Greek,
Dutch,andSimpliedChinese
• Custom language (one language): One language other than the above
can be imported remotely. For the addition of custom language, contact
the service department.

En-6
1-2-2. RemoteControllerGroupandAddressSetting
Address setting to this controller is required to assign the air conditioners with remote controller group.
Address is set automatically or manually for each refrigerant system.
Name Description
G Refrigerant system address (0-99): This is the ID individually assigned to each refrigerant system and is used
for control.
H Indoor unit address (00 - 63): This is the ID individually assigned to each indoor unit and is used for
control.
JRemote controller address (0-15): This is the group of indoor units that have been connected with remote
controller cable, or single indoor unit.
KR.C.G. address:
Remote controller group (R.C.G.) address is made up of the refrigerant
system address and the indoor unit address of indoor unit with remote
controller address “0”.
(Hereafter Remote controller group is called “R.C.G.”)
Example) Refrigerant system address=00
00
00
00
00 03 000 02 200 01 100 00 0
K
G
G
H
J
Refrigerant system address=01
01
01
01
01 03 001 02 201 01 101 00 0
K
G

En-7
1-3. SystemConguration
Monitoring screen
The air conditioner operating status can be monitored, set, and controlled.
Operation system
→Refer to Chap. 2.
Batch Setting
Individual Setting
Schedule Setting
Master setting system
→Refer to Chap. 3.
Menu Select
screen
(1) Group Setting
(2) Preference
(3) Maintenance
(4) Installer Setting

En-8
1-4. GeneralUsage
This controller screens are all the touch panel display. Tap the screen to select the function.
LCD
(Whentapped,LCDlightsup.→Refer to 3-2-1.
LED
(LED lights up green when the power is on.)
■Features of screen input
• From main screen, you can access to desired setting screen by simple operation.
• When setting at small pop-up display in this controller, you can set while checking the information of the screen behind
pop-up.
1-4-1. Name of Part
■Main screen
Left menu
(Always display)
Menu button
Group or R.C.G. button
Group scroll button
R.C.G. scroll button
Group expansion cancel
button
■Other sample screen
Icon
Button

En-9
1-4-2. GeneralScreenSpecication
■Button
The functions such as [OK] and [Cancel] are buttonged.
[OK] Continues the appropriate process.
[Cancel] Cancels the process and closes the current screen.
[Reset] Returns the changed item to the initial value.
[Close] Closes the current screen .
[End] Ends the process and closes the pop-up.
■Icon
The functions such as [Delete] and [Copy] are iconized.
Icon Description
Deletes the currently displayed setting.
Copies the currently displayed setting.
Adds the new timer. However, when the number of settings
reaches the upper limit, this button is disabled.
Deletes the selected line.
Copies the selected line.
Adds the new line. However, when the number of settings
reaches the upper limit, this button is disabled.

En-10
■Pop-up screen
 Whenthepop-upfunctionisdisplayed,onlythepop-upfunctionwhichappearsnallycanbeoperatedandother
functions arranged in the screen cannot be operated.
 When the buttons are not displayed on the pop-up screen
When other screen is operated or 20 seconds passes after display, pop-up display is closed.
However, the following cases are excluded.
●The setting menu (open mode) is not closed even when other screens are operated. The menu is closed after 20
minutes passes.
●The left menu of monitoring screen is not closed even when other screen is operated or 20 minutes passes.
● Thepop-upwithdisplayreleasingconditioncontinuestodisplayuntiltheconditionissatised.(Forexample,thepop-up
display notifying that VRF system is in a special state is not closed until the special state is released.)
(Sample screen)
■Menu button
Menu Button
Close mode
When the Menu button is tapped, the Menu screen is
displayed.
Open mode
The Menu screen is displayed and Setting menu can
be selected. When tapped again, the Menu returns to
the Close mode.

En-11
■Keyboard input
Input the alphameric characters or Russian characters. (Keyboard is used for LAN setting or mail address setting.)
(Keyboard sample)
■Screen explanation
The items in the screen image are numbered and they are explained in the following table.
* For the general buttons such as [OK], [Cancel], etc., the explanations are omitted in the table.
(Sample) Group setting
 3 4
6
7
5
7
No. Item Description
Group name Registers the group name. (Max. 13 characters) Up to 50 groups can be
registered.
[Delete] icon Deletes the group. When there is no group after deletion, “There is no group to
display.” is displayed.
3[New] icon Adds the group. When the number of registered groups reaches 50, this button is
disabled.
4Already selected R.C.G. Indicates that the R.C.G. is already selected by other groups.
5R.C.G. list When selected, checkbox is checked. Up to 100 R.C.G. can be registered for one
group.
6Group switch-over button Switches over the displayed group.
7R.C.G. scroll buttons The right and left scroll buttons are displayed when R.C.G. are more than 25.

En-12
1-5. InitialSetting
After Central remote controller installation work is complete, perform initial setting by the following procedure before
starting to use the system.
Initialsettingstart
Initialsettingend
Operation start
(Refer to Chap. 2.)
Turnonthepower
(Breaker ON)
Onlywhenthepoweristurnedonforthersttimeorimmediatelyafter
initialization is set, the following wizard are displayed in wizard format.
Perform the settings.
(1) LanguageSetting→Refer to 3-4-1(4).
(2) PanelCalibration→Refer to 3-2-2(4).
(3) CentralControllerAddressSetting→Refer to 3-4-2(4).
(4) IndoorUnitRegistration→Registration→Referto3-4-3-3.
(5) DateSetting→Refer to 3-2-4-1, 3-2-4-2.
* Automatic scan for all units connected at initial start-up is performed and
one group is created.
Monitoring screen is displayed. Perform the settings as necessary.→Refer to
Chap. 3.
Air conditioning starts on the Monitoring screen.

En-13
2. CONTROL
2-1. MonitoringScreen
For the registered group, operation status can be checked or set in any of 6 groups or 12 groups display.
The sample below is the screen of 6 groups display.
• ThegroupsregisteredatgroupsettingaredisplayedontheMonitoringscreen.→Refer to 3-3-1.
• ThedisplayitemcanbesetontheMonitoringscreen.→Refer to 2-1-1.
R.C.G. are expanded in dotted line. (R.C.G. belonging to the tapped group are displayed.)

4

3
5
6
7
9






8
• When the triangle mark on the bottom-right corner is tapped, the R.C.G.
belonging to the group are displayed.
• When the R.C.G. are expanded, the bottom-right corner of square
seems to be folded.


En-14
No. Item Description
All R.C.G. On/Off
When the password setting is valid, input the password after selecting the
process in the followings.
“All ON”: Sets all R.C.G. registered to this controller to ON collectively.
TheoperationofallR.C.G.isturnedOnorOffcollectively.→Refer to
2-1-1.
“Detail”:Setstheoperationcontentsindetails.→Refer to 2-2-2.
On/Off icon: Colorfully indicates the ratio of operation On status for the
number of registered R.C.G..
Green: Operation On status, Gray: Operation Off status
Special state display
Only when even one registered indoor unit or outdoor unit is in the
following special state, the icon is displayed.
Icon State
Refrigerant leakage
Emergency stop
Maintenance mode / Bus priority
3Date Displays the date and time.
4Error display
When even one unit is abnormal in the registered indoor units or outdoor
units, [Error] icon is displayed.
Displays error information as follows:
• “Error Code”: Displays the error code.
• “Address”: Displays the address of the unit where an error occurs.
• “Model Name”: Displays the model name of the unit where an error
occurs.
• Model Name: Displays as follows:
Outdoor unit: Outdoor Unit
Indoor unit: Group name or R.C.G. name
This controller: Central Controller
5[Schedule] icon Displaystheoperationschedulesettingscreen.→Refer to 2-3.
6[Change Items] icon Setsthecontentstobedisplayedonthescreen.→Refer to 2-1-1.
7Menu button Displays the Setting Menu screen by tapping this button which is always
displayed.→Refer to Chap. 3.
8Group display Displays the groups which were already set. Displays the group operation
status.→Refer to [Table 1].
9Group name Display the group name.
Group operation status Setstheoperationcontentsofthetappedgroup.→Refer to 2-2-2.
Group expansion Expands the R.C.G. registered to the group by tapping.
Group scroll button When the number of registered groups exceeds the maximum display
limit, the right and left scroll buttons are displayed.
R.C.G. display
Displays the R.C.G. registered to the group. (The registered R.C.G. are
displayed from left to right and from the top in ascending order of system
No. and unit No.)
R.C.G. name Displays the R.C.G. name.
R.C.G. operation status DisplaystheR.C.G.operationstatus.→Refer to [Table 1].
SetstheR.C.G.operationcontents.→Refer to 2-2-2.
R.C.G. scroll button When the number of registered R.C.G. exceeds the maximum display
limit, the right and left scroll buttons are displayed.

En-15
[Table 1] Operation status
Thesetitemsaredisplayedatoperationstatus.→Refer to 2-1-1.
Color Icon Operation status
Light blue The operations of groups and R.C.G. are “Cool” or “Dry”.
Pink The operations of groups and R.C.G. are “Heat”.
Purple The operations of groups and R.C.G. are “Fan”, “Auto”, or “Custom Auto”.
Rainbow The operation modes of groups are mixed.
Gray The operations of all groups and R.C.G. are stopped.
Yellow Even one unit of groups or R.C.G. is on a test operation. (Displayed regardless
of operation mode)
―
The icons of “R.C. prohibition”, “Temp. upper and lower limit”, and “Schedule”
aredisplayedwhen“ManagementStatus”ischecked.→Refer to 2-1-1.
When the room temperature is out of the room temperature sensor range, the
icon of over upper limit or below lower limit is displayed.
Display icon
• Whenrefrigerantleak,error,mismatchmode,orltersignoccursateven
one unit, the icon is displayed.
• When refrigerant leak and error occur at the same time, refrigerant leak is
displayed preferentially.

En-16
2-1-1. ChangeItemsSetting


3
No. Item Description
“Management Status” display
When checkbox is checked, the icons of “R.C. prohibition”, “Temp. upper
and lower limit”, and “Schedule” are displayed on the group. The display
switches to normal icon display automatically 12 seconds after the scroll
button, etc. is tapped.
“Operation Status” selection
Switches between enabled and disabled state of the display by checkbox.
Up to 2 items of “Mode”, “Room Temp.”, “Set Temp.” can be enabled. All
items cannot be disabled. When one of “Room Temp.” or “Set Temp.” is
enabled or both of “Room Temp.” and “Set Temp.” are enabled, “Temp.
Unit” can be enabled.
3“Group Icon” size
Sets the group icon size to be displayed. [Initial value: Auto]
“Auto”: When the number of registered group is 6 or less, icons are large.
When it is 7 or more, icons are small.
“Large”: Icons are large. (maximum number of display group: 6)
“Small”: Icons are small. (maximum number of display group: 12)
2-2. OperationSetting
Perform the operation setting for the group or R.C.G. registered to this controller.
(1) Batch setting: Performs the same setting to all R.C.G. registered to this controller.
(2) Individual setting: Performs the individual setting for the tapped group or R.C.G..
When the password is set at start-up, enter the password. (Refer to 3-2-5.)
2-2-1. BatchSetting
(1) Tap the following item.
No. Item Description
“On” Sets all R.C.G. to ON collectively.
“Off” Sets all R.C.G. to OFF collectively.
3“Detail”
Sets the details of batch operation. The
screen is the same as the individual
setting.→Refer to 2-2-2.


3

En-17
2-2-2. IndividualSetting
3
4



5 6 7 8
9   
No. Item Description
“Group name” / “R.C.G. name” Selects “Group name” to be set.
For Batch setting, “All Indoor Units” is displayed.
“Special State”
When the currently displayed group or R.C.G. is in a special state, icon is
displayed.
• Displayed states when even one unit is in a special state
Icon State Icon State
Emergency stop Mismatch mode
Maintenance mode Test operation
Refrigerant leakage Pump down
Error Auxiliary power supply
Oil recovery ― ―
• Displayed state when all units are in a special state
Managed unit (when all indoor units are not master indoor unit, and
master unit is managed or outdoor unit is managed)
3“Room Temp.” Displays the room temperature.
4“On/Off” Selects “On” or “Off” for operation state.
5“Mode” Selects the mode. (“Auto”, “Cool”, “Dry”, “Fan” and “Heat”. Selectable
mode depends on the indoor unit)
6“Set Temp.” Selects the “Set Temp.” with 0.5ºC (1ºF) in units. (except when “Fan” or
“Off” is selected)
7“Set Temp. (Custom Auto)” “Cool”* Setting range: “Auto” 18 to 30ºC (64 to 88ºF)
“Cool / Dry” 18 to 30ºC (64 to 88ºF)
“Heat” 10 to 30ºC (44 to 88ºF)
8“Set Temp. (Custom Auto)” “Heat”*
9“Fan Speed” Sets “Fan Speed”.
“Auto”, “High”, “Med-High”, “Med”, “Med-Low”, “Low”, “Quiet”
“Air Flow Direction” Sets“AirFlowDirection”.→Refer to 2-2-2-1.
“Anti Freeze” Sets “Anti Freeze” operation. Select “On” or “Off”.
“Economy” Sets “Economy” operation. Select “On” or “Off”.
“Temperature Limit” Sets“Temp.Limit”.→Refer to 2-2-2-2.
“Filter Sign” Resets “Filter Sign”. (Operation accumulated time is reset.)
“R.C. Prohibition” Sets“R.C.Prohibition”.→Refer to 2-2-2-3.
Group / R.C.G. switch-over button Switches over between group display and R.C.G. display.
* “Set temp.” is displayed only when a unit with Custom Auto function is registered.
Custom Auto:
Set the set temperature for cooling and the set temperature for heating separately. During the Custom Auto mode
operation, when the room temperature exceeds the set temperature for cooling, the cooling operation is performed, and
when the room temperature falls below the set temperature for heating, the heating operation is performed. (It can be
used only when the setting of the indoor unit compatible with this function is valid.)
Note

En-18
2-2-2-1. VerticalandHorizontalAirowDirectionSetting
Settheverticalandhorizontalairowdirection.
45

3
No. Item Description
Verticalairowdirectionselection Selectstheairowdirectionbytapping.
Verticalairowdirectionswing Setstheverticalairowdirectionto[Swing].
3Horizontalairowdirectionselection Selectstheairowdirectionbytapping.
4Horizontalairowdirectionswing Setsthehorizontalairowdirectionto[Swing].
5[Reset] button Resetsindividualairowdirectionsetting.
2-2-2-2. TemperatureUpperandLowerLimitSetting
Set the temperature upper and lower limit setting of “Auto”, “Cool/Dry”, and “Heat”.
 4 6

3 5 7
No. Item Description
Set temperature “Enable” / “Disable” Sets “Enable” or “Disable” of upper and lower limit setting. Select from
“Enable” or “Disable”.
“Auto” upper limit Sets the “Auto” upper limit with 0.5ºC (1ºF) increments.
Range: 18.0 to 30.0ºC (64 to 88ºF)
3“Auto” lower limit Sets the “Auto” lower limit with 0.5ºC (1ºF) increments.
Range: 18.0 to 30.0ºC (64 to 88ºF)
4“Cool/Dry” upper limit Sets the “Cool/Dry” upper limit with 0.5ºC (1ºF) increments.
Range: 18.0 to 32.0ºC (64 to 91ºF)
5“Cool/Dry” lower limit Sets the “Cool/Dry” lower limit with 0.5ºC (1ºF) increments.
Range: 18.0 to 32.0ºC (64 to 91ºF)
6“Heat” upper limit Sets the “Heat” upper limit with 0.5ºC (1ºF) increments.
Range: 10.0 to 30.0ºC (48 to 88ºF)
7“Heat” lower limit Sets the “Heat” lower limit with 0.5ºC (1ºF) increments.
Range: 10.0 to 30.0ºC (48 to 88ºF)

En-19
2-2-2-3. RemoteControllerProhibitionSetting
Set the prohibited operations of remote controller.

No. Item Description
Selected status
Switches between enabled and disabled state by checking the checkbox.
(When checked, the setting is prohibited.)
“All”, “On/Off”, “On”, “Mode”, “Temp”, “Timer”, and “Filter Reset” can be set
to prohibited state.
When “All” is checked, other checkboxes are disabled.
2-3. ScheduleSetting
When the password is set at start-up, enter the password. (Refer to 3-2-5.)
(1) Tap the [Schedule] icon of left menu on the monitoring
screen.
(2) Tap [Create New Schedule] or schedule name. The pop-up of
schedule detail setting is displayed.
(When the schedule is not set, [Create New Schedule] is
displayed. If the schedule is already registered, the name is
displayed.)

En-20
2-3-1. ScheduleDetailSetting
Set the details of schedule.
4
6
7
85
3
9

No. Item Description
“Enable” / “Disable” display Sets “Enable” or “Disable” for the registered schedule.
Schedule name
Registers the schedule name. (Max. 13 characters) Up to 20 schedules
can be registered.
The names can be input using keyboard and they can also be selected
fromthexedformphrase.
¡Input candidate:
“Floor”/“Corridor”/“Whole”/“Hall”/“Ofce”/“Confroom”/“Receipt
room” / “Restaurant Café” / “Lounge” / “Kitchen” / “Store” / “Stock room”
/ “Classroom” / “Reception” / “Entrance” / “Control room” / “Guest room”
/ “Room no.” / “Locker room” / “Summer set” / “Winter set” / “Weekday” /
“Holiday”
3[Delete] icon Deletes the currently displayed schedule.
4[Copy] icon Newly creates the same schedule as the setting schedules at the end of
the existing schedules and displays the new creation screen.
5[New] icon Creates the new schedule at the end of the existing schedules and
displays the new creation screen.
6Day of week Switches the timer to be set to the day of week. “Create new timer”, “Day
Off”, “Deregister”, and registered timer can be selected.
7Setting timer
Displays the setting timer name.
When not set, this column is blank. When Day off is set, “Day off” is
displayed.
8Schedule switch-over button Switches over the displayed schedule.
9Registered group Setsthegroupstobecontrolled.→Refer to 2-3-1-1.
[Timer Edit] button Selectsthenewtimerandregisteredtimerandsetsthedetails.→Refer
to 2-3-2.