Fujitsu ScanZen Eco Series User manual

1
ScanZen Installation Guide
How to Set up ScanZen
Here’s an easy to follow guide to get you quickly set up with your ScanZen Eko series scanner.
1. Checking the Components
2. Removing the Protective Packaging
3. System Requirements
4. Installing the Driver
5. Connecting the ScanZen
6. Installing the Software
7. Scan Test

2
Scanner
Paper Chute
AC Outlet
AC Adapter
1. Checking the Components
Make sure that all items shown below are included in the package.

3
USB Cable
Welcome to ScanZen Card
Remove the protective packaging
and tape.
1. Download &Install Drivers 3. Select Application
4. Scan &Achieve Zen!
Installation instructions, users guides, software
and warranty registration are all available online.
©
2. Plug in your scanner
Please plant this seeded postcard
to grow a garden of flowers and
give back to the Earth!
*CG00002-297201*
Ph: 844-686-8448
Email: [e-mail]
Website: www.scanzen.com ©
2. Removing the Protective Packaging
Follow the procedure below to carefully remove the protective packaging before using the scanner.
1

4
Remove the
protective
packaging and tape.
Remove the protective packaging
and tape.
Attach the ADF paper chute.
2
3
4

5
3. System Requirements
Make sure that your computer satisfies the following system requirements.
Hardware
Operating System
Windows®10 (32-bit/64-bit)
Windows®8.1 (32-bit/64-bit)
Windows®7 (32-bit/64-bit)
l
l
l
Recommendations
4 GB or more
1024 x 768 pixels or more
7200 rpm or faster
Memory
Display
Hard disk drive
CPU Intel®Core™i5 2.5 GHz or higher,
except for mobile
Intel®Pentium®4 1.8 GHz
Requirements
1 GB
5400 rpm

6
4. Installing the Driver
Follow the steps below to install the driver for ScanZen onto your computer.
1If you have an administrator on a shared network, be sure you log into Windows®as a
user with administrator privileges.
3
2
4
5
Quit any other applications that are running on your computer.
Follow the instructions from the Installation Wizard to complete the installation.
Download the following file onto your hard drive.
Run the file that you downloaded in step 2. This creates a folder named “Disk1” in
the same folder where the program is stored. Installation starts automatically after
self-extraction. If it doesn’t start, double-click “Setup.exe” which is located in the Disk1 folder.
PaperStream IP (TWAIN) for ScanZen 1.54.0.xxxx
PSIPTWAIN-SZ-1_54_0c.exe (xx,xxx,xxx Bytes)

7
5. Connecting the ScanZen
Connect the cables in the following order.
ON
Hold for at least
2 seconds

8
6. Installing the Software
Follow the steps below to install the software.
The following software can be installed:
PaperStream Capture Lite
Presto!™PageManager™
ABBYY™FineReader™Sprint
l
l
l
Read the end-user license agreement shown below and select the [I agree to the terms
and conditions above] checkbox.
1
Download the following file onto your hard drive.3
Be sure you log into Windows®as a user with administrator privileges.2
When the file download is completed, run the file.4
Follow the instructions on the window.5
END-USER LICENSE AGREEMENT
This End-User License Agreement (“EULA”) is a legal agreement between the user of
this software (“You”) and PFU Limited (“PFU”) for governing the use of the PFU software
to be used with PFU fi Series scanner product (“Product”). The PFU software includes
the Software download tool(“Software”).
I agree to the terms and conditions above. (Necessary)
Software Download Tool 1.0.11
SoftwareDownloadTool.exe (17.5 MB)

9
7. Scan Test
Using PaperStream Capture Lite and PaperStream IP (TWAIN) driver, scan a document with the
following procedure to see if a scan can be performed properly.
1 2
3
Lite
PaperStream
Capture Lite
PaperStream Capture Lite
Place paper upside
down and face down.

10
4 5