Fujitsu PRIMERGY CX400 M4 User manual

Operating Manual - English
FUJITSU Server PRIMERGY CX400 M4
Server Enclosure
Operating Manual
July 2017

Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
[email protected]su.com.
Certified documentation
according to DIN EN ISO 9001:2008
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2008.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
Copyright 2017 FUJITSU LIMITED
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
– The contents of this manual may be revised without prior notice.
– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from
the use of any information in this manual.
– No part of this manual may be reproduced in any form without the prior written permission
of Fujitsu.
Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of
Microsoft Corporation in the USA and other countries.
Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries
in the USA and other countries.

CX400 M4 Operating Manual
Before reading this manual
For your safety
This manual contains important information for safely and correctly using this
product.
Carefully read the manual before using this product. Pay particular attention to
the accompanying manual "Safety Notes and Regulations" and ensure these
safety notes are understood before using the product. Keep this manual and the
manual "Safety Notes and Regulations" in a safe place for easy reference while
using this product.
Radio interference
This product is a "Class A" ITE (Information Technology Equipment). In a
domestic environment this product may cause radio interference, in which case
the user may be required to take appropriate measures. VCCI-A
Aluminum electrolytic capacitors
The aluminum electrolytic capacitors used in the product's printed circuit board
assemblies and in the mouse and keyboard are limited-life components. Use of
these components beyond their operating life may result in electrolyte leakage
or depletion, potentially causing emission of foul odor or smoke.
As a guideline, in a normal office environment (25°C) operating life is not
expected to be reached within the maintenance support period (5 years).
However, operating life may be reached more quickly if, for example, the
product is used in a hot environment. The customer shall bear the cost of
replacing replaceable components which have exceeded their operating life.
Note that these are only guidelines, and do not constitute a guarantee of
trouble-free operation during the maintenance support period.
High safety use
This product has been designed and manufactured to be used in commercial
and/or industrial areas as a server.
When used as visual display workplace, it must not be placed in the direct field
of view to avoid incommoding reflections (applies only to TX server systems).
The device has not been designed or manufactured for uses which demand an
extremely high level of safety and carry a direct and serious risk of life or body
if such safety cannot be assured.

Operating Manual CX400 M4
These uses include control of nuclear reactions in nuclear power plants,
automatic airplane flight control, air traffic control, traffic control in mass
transport systems, medical devices for life support, and missile guidance
control in weapons systems (hereafter, "high safety use"). Customers should
not use this product for high safety use unless measures are in place for
ensuring the level of safety demanded of such use. Please consult the sales
staff of Fujitsu if intending to use this product for high safety use.
Measures against momentary voltage drop
This product may be affected by a momentary voltage drop in the power supply
caused by lightning. To prevent a momentary voltage drop, use of an AC
uninterruptible power supply is recommended.
(This notice follows the guidelines of Voltage Dip Immunity of Personal
Computer issued by JEITA, the Japan Electronics and Information Technology
Industries Association.)
Technology controlled by the Foreign Exchange and Foreign Trade
Control Law of Japan
Documents produced by Fujitsu may contain technology controlled by the
Foreign Exchange and Foreign Trade Control Law of Japan. Documents which
contain such technology should not be exported from Japan or transferred to
non-residents of Japan without first obtaining authorization in accordance with
the above law.
Harmonic Current Standards
This product conforms to harmonic current standard JIS C 61000-3-2.
Only for Japan: About SATA HDDs
The SATA version of this server supports HDDs with SATA/BC-SATA storage
interfaces. Please note that the usage and operation conditions differ
depending on the type of HDD used.
Please refer to the following internet address for further information on the
usage and operation conditions of each available type of HDD:
http://jp.fujitsu.com/platform/server/primergy/harddisk/

CX400 M4 Operating Manual
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.1 Concept and target groups for this manual . . . . . . . . . . 7
1.2 Documentation overview . . . . . . . . . . . . . . . . . . . . 8
1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . . 9
2 Functional overview . . . . . . . . . . . . . . . . . . . . . . 11
2.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.2 Server enclosure specification . . . . . . . . . . . . . . . . 13
3 Installation steps, overview . . . . . . . . . . . . . . . . . . 19
4 Important information . . . . . . . . . . . . . . . . . . . . . 21
4.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 21
4.2 ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . 30
4.3 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 30
4.4 FCC Class A Compliance Statement . . . . . . . . . . . . . 31
4.5 Environmental protection . . . . . . . . . . . . . . . . . . . 32
4.6 Transporting the server enclosure . . . . . . . . . . . . . . 33
4.7 Notes on installing the server enclosure in the rack . . . . . 34
5 Hardware installation . . . . . . . . . . . . . . . . . . . . . . 35
5.1 Unpacking the server enclosure . . . . . . . . . . . . . . . 36
5.2 Installing/removing the server enclosure in/from the rack . 37
5.2.1 Mounting the server enclosure in the rack . . . . . . . . . . . . 39
5.2.2 Removing the server enclosure out of the rack . . . . . . . . . 46

Operating Manual CX400 M4
Contents
5.3 Connecting the server enclosure to the mains . . . . . . . . 50
5.4 Notes on connecting/disconnecting cables . . . . . . . . . . 51
6 Starting up and operation . . . . . . . . . . . . . . . . . . . . 53
6.1 Overview of the server enclosure . . . . . . . . . . . . . . . 53
6.1.1 Front overview with CX2550 M4 server nodes . . . . . . . . . . 53
6.1.2 Front overview with CX2560 M4 / CX2570 M4 server nodes . . . 54
6.1.3 Rear overview with CX2550 M4 or CX2560 M4 server nodes . . 55
6.1.4 Rear overview with CX2570 M4 server nodes . . . . . . . . . . 56
6.2 Controls and indicators . . . . . . . . . . . . . . . . . . . . . 57
6.2.1 Front of the server enclosure . . . . . . . . . . . . . . . . . . . 57
6.2.1.1 Indicators on the front panel (enclosure-related) . . . . . . . 58
6.2.1.2 Indicators on the front panel (node-related) . . . . . . . . . . 60
6.2.1.3 ID card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
6.2.1.4 Indicators on the HDDs . . . . . . . . . . . . . . . . . . . . 63
6.2.2 Indicator on hot-plug PSU . . . . . . . . . . . . . . . . . . . . 64
6.2.3 Indicators of the server nodes . . . . . . . . . . . . . . . . . . 64
6.3 Switching the multi-node server system on and off . . . . . 65
6.4 Cleaning the server enclosure . . . . . . . . . . . . . . . . . 68
7 Property and data protection . . . . . . . . . . . . . . . . . . 69
7.1 BIOS setup security functions . . . . . . . . . . . . . . . . . 69
8 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 71
8.1 Power-on indicator remains unlit . . . . . . . . . . . . . . . . 71
8.2 Drives reported as “dead” when starting system . . . . . . . 72
8.3 Added drive reported as defective . . . . . . . . . . . . . . . 72

CX400 M4 Operating Manual 7
1 Introduction
The FUJITSU Server PRIMERGY CX scale-out systems are the ideal basis for
cloud, hyper-converged and high performance computing solutions. They
provide data centers as well as branch offices with massive computing power
for virtualized environments, complex calculations as well as consolidation and
high-availabilty scenarios.
The FUJITSU Server PRIMERGY CX400 M4 helps to meet the immense
challenges now facing companies as well as research and development
institutions. The system with only 2 height units contains up to four server
nodes, 8 Intel
®
Xeon
®
Processors and 64 DDR4 memory DIMMs, thus
providing the very highest performance and energy efficiency levels.
The scale-out system can be perfectly adapted for a wide range of applications
thanks to its high degree of modularity. When requirements change, additional
server nodes, co-processor cards or hard disks can just be added. In
comparison to conventional rack servers the PRIMERGY CX400 M4 wins
through thanks to its double server density and low hardware and operating
costs. The system is thus an ideal replicable component in order to implement
large scale-out solutions.
1.1 Concept and target groups for this manual
This operating manual describes how to install, set up and operate your server
enclosure.
This operating manual is intended for those responsible for installing the
hardware and ensuring that the system runs smoothly. It contains all the
information you need to put your PRIMERGY CX400 M4 server enclosure into
operation.
To understand the various expansion options, you will need to be familiar with
the fields of hardware and data transmission and you will require a basic
knowledge of the underlying operating system.

8 Operating Manual CX400 M4
Introduction
1.2 Documentation overview
More information on your PRIMERGY CX400 M4 server enclosure can be
found in the following documents:
– "Quick Start Hardware - PRIMERGY CX400 M4 Server Enclosure"
– "ServerView Suite Quick Start Guide"
– "Safety Notes and Regulations" manual
"安全上のご注意 " for Japan
– "Warranty" manual
"保証書 " for Japan
– "Returning used devices" manual and "Service Desk" leaflet
"サポート＆サービス " for Japan
– "FUJITSU Server PRIMERGY CX400 M4 Server Enclosure Upgrade and
Maintenance Manual"
Further information
The PRIMERGY CX400 M4 server enclosure is a multi-node system. For
information on the individual server nodes please refer to the following manuals:
– "FUJITSU Server PRIMERGY CX2550 M4 / CX2560 M4 / CX2570 M4
Server Node Operating Manual"
– "D385x BIOS Setup Utility for FUJITSU Server PRIMERGY CX2550 M4 /
CX2560 M4 / CX2570 M4" Reference Manual
– "FUJITSU Server PRIMERGY CX2550 M4 / CX2560 M4 / CX2570 M4
Server Node Upgrade and Maintenance manual"
IAll documentation on PRIMERGY hardware and ServerView software is
available online from the Fujitsu manuals server at:
http://manuals.ts.fujitsu.com
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/manual/
The complete PRIMERGY documentation set can also be downloaded
as a DVD ISO image at:
ftp://ftp.ts.fujitsu.com/images/serverview/manuals
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/

CX400 M4 Operating Manual 9
Introduction
Further sources of information:
– ServerView Suite Glossary
– Manual for the monitor
– Documentation for the boards and drives
– Operating system documentation
– Information files in your operating system
1.3 Notational conventions
The following notational conventions are used in this manual:
Text in italics indicates commands or menu items.
"Quotation marks" indicate names of chapters and terms that are being
emphasized.
Êdescribes activities that must be performed in the order
shown.
VCAUTION! pay particular attention to texts marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system or lead to the loss of data.
Iindicates additional information, notes and tips.

10 Operating Manual CX400 M4
Introduction

CX400 M4 Operating Manual 11
2 Functional overview
2.1 Features
This section provides information on the features and technical data of the
PRIMERGY CX400 M4 server enclosure. For information on key characteristics
and layout of the system board, see the "FUJITSU Server PRIMERGY
CX400 M4 Server Enclosure Upgrade and Maintenance Manual".
Server enclosure
The PRIMERGY CX400 M4 server enclosure consists of the server enclosure
which has to be equipped with different configurations of server nodes, as there
are:
– 4 PRIMERGY CX2550 M4 / CX2560 M4 server nodes
– 2 PRIMERGY CX2570 M4 server nodes
All server nodes are hot pluggable. A mixture of CX2550 M4 and CX2560 M4 /
CX2570 M4 nodes within the same server enclosure is not supported.
HDDs
Using CX2550 M4 server nodes, the server enclosure can be equipped with a
maximum of 8 x 2.5 " HDD / SSD modules.
Using CX2560 M4 server nodes, the server enclosure can be equipped with a
maximum of 24x 2.5 " HDD / SSD modules.
Using CX2570 M4 server nodes, the server enclosure can be equipped with a
maximum of 12x 2.5 " HDD / SSD modules.
Each HDD/SSD module can accommodate an SAS/SATA HDD or SSD with a
maximum height of 1 inch. The module is connected to the SAS/SATA
backplane wirelessly. This allows HDD / SSD modules to be plugged in or pulled
out easily.
Six SATA HDD/SSDs can be controlled by the onboard SATA controller. To
control further SAS/SATA HDD/SSDs, an additional SAS/RAID controller must
be installed.
Hybrid configurations of SAS HDDs, SATA HDDs, SAS SSDs and SATA SSDs
within the same logical drive (RAID array) are not supported.

12 Operating Manual CX400 M4
Functional overview
If the server enclosure has the corresponding RAID configuration, HDD / SSD
modules can also be replaced during operation.
Power supply
The system has two bays for hot-plug PSUs. Each hot-plug PSU can be
replaced during operation (see the "FUJITSU Server PRIMERGY CX400 M4
Server Enclosure Upgrade and Maintenance Manual").
The PSUs adjust automatically to any mains voltage in the range 100 V - 240 V.
High level of availability and data security
When memory data is accessed, 1-bit errors are identified in the main memory
and automatically corrected with the error correcting code (ECC) method.
ASR&R (Automatic Server Reconfiguration and Restart) restarts the system in
the event of an error and automatically "hides" the defective system
components.
A RAID controller supports different RAID levels and increase the availability
and data security of the system.
The hot-plug HDD modules provide additional availability.
Advanced Thermal Design
The Advanced Thermal Design option allows you to operate the system with a
wider temperature range of 5 °C to 40 °C, depending on your system and
configuration.
VCAUTION
In a system that is configured with Advanced Thermal Design, only
certain components which support the respectively increased higher
operating temperature range may be installed and used. For applicable
restrictions, please refer to the official configurator tool.
This option can only be ordered from the manufacturer and is
indicated by the respective logo on the identification rating
plate.

CX400 M4 Operating Manual 13
Functional overview
2.2 Server enclosure specification
This section explains the specifications for the server enclosure. The
specifications for this server enclosure are liable to be updated without any
notice. Please be forewarned.
System board
Operating panel
Dimensions / weight
Server enclosure type 2U chassis for 19-inch rack
Rear bays 4 bays for half wide server nodes and 2 bays for PSU
Fan configuration 8 hot-pluggable fans
Power supply
configuration
2x hot-plug PSUs
Operating buttons On/off button
ID indicator
Server enclosure
(W x D x H)
Body (444.0 x 877.5 x 86.5 mm)/ Bezel (480.2 x
877.5 x 86.5 mm)
Mounting depth server
enclosure
850.0 mm
Height server
enclosure
2 U
19" rackmount Yes
Mounting cable depth
server enclosure
200 mm (1000 mm server enclosure recommended)
Weight up to 45 kg plus 4 kg for rack rails
Weight notes actual weight may vary depending on configuration
Rack mounting kit Included in Rack System

14 Operating Manual CX400 M4
Functional overview
Electrical data (hot-plug PSU 1600 W)
Electrical data (hot-plug PSU 2400 W)
Rated voltage range 100 - 240 V
Frequency 50 Hz - 60 Hz
Max. rated current 10.5 A (100-120 V) / 9.2 A (200-240 V)
Output 900 W (100-120 V) / 1600 W (200-240 V)
Main power fuse 16 A
Protection class I
Power supply efficiency 94% (at 50% load)
Electrical value notes Active power max. value depends on
system configuration.
For details see "Power Configuration Tool"
or "System Architect"
Rated voltage range 100 - 240 V
Frequency 50 Hz - 60 Hz
Rated current 14 A (100-120 V) / 13 A (200-240 V)
Output 1200 W (100-120 V) / 2400 W (200-240 V)
Main power fuse 16 A
Protection class I
Power supply efficiency 94% (at 50% load)
Electrical value notes Active power max. value depends on
system configuration.
For details see "Power Configuration Tool"
or "System Architect"

CX400 M4 Operating Manual 15
Functional overview
Ambient conditions
Condensation during operation must be avoided!
Noise level
Drive bays
Environment class 3K2
Environment class 2K2
EN 60721 / IEC 721 Part 3-3
EN 60721 / IEC 721 Part 3-2
Temperature:
Operation (3K2) 5°C ~ 40°C (with ATD)
10°C ~ 35°C (without ATD)
The maximum temperature depends on
type of the CPU.
Transport (2K2) -25 °C ~ +60 °C
Humidity 10% ~ 85% (non condensing)
Sound power level L
WAd
(ISO 9296) < 7.8 B (standby)
< 8.6 B (operation)
Sound pressure level at adjacent position L
pAm
(ISO
9296)
< 62.3 dB(A) (standby)
< 70 dB(A) (operation)
Product Model Name CX2550/60 M4 CX2570 M4
Product Type Dual Socket
Server Node
(Intel)
Dual Socket
Server Node
(Intel)
CPU Quantity Support 22
Number of nodes (max.) 42
Memory slots total 16 16
Supported capacity RAM (max.) 2048 GB 2048 GB

16 Operating Manual CX400 M4
Functional overview
Number of storage drives (max.) 2 x 2.5-inch
(applicable to
CX2550) or 6 x
2.5-inch
(applicable to
CX2560)
6 x 2.5-inch
Co-processor cards up to 2 up to 2 or up to 4
SXM2 modules

CX400 M4 Operating Manual 17
Functional overview
Compliance with standards
Product safety and ergonomics
International IEC60950-1
Europe
Safety EN 60950-1
EN 50371
EN 50392
Ergonomics ISO 9241-3
EN 2941-3
EK1-ITB 2003:2007
USA / Canada CSA-C22.2 No. 60950-1-07 2ed.
UL 60950-1 2ed.
Taiwan CNS 14336
China GB 4943
Australia, New Zealand (RCM) CB(IEC60950-1 AS/NZS Deviations.)
Saudi Arabia (SASO) CB (IEC 60950-1)
Kenia (KEBS) KS (Kenya Standards) CB(IEC 60950-
1)
Kuwait (KUKAS) KSS (Kuwaiti Standards
Specifications) CB(IEC 60950-1)
Tanzania (TBS) CB(IEC 60950-1)
Russia (EAC) CU TR 004/2011 (IEC60950-1:2005)
Electromagnetic compatibility
International CISPR 22
Europe EN 55032 Class A
EN 55024
EN 61000-3-2
EN 61000-3-3
ETSI 300386
USA / Canada 47CFR part 15 Class A / ICES-003
Taiwan CNS 13438 Class A
China GB 9245 / GB 17625
Australia, New Zealand (RCM) AS/NZS CISPR 32

18 Operating Manual CX400 M4
Functional overview
VCAUTION!
This device meets the requirements of Class A CISPR 22. This device
can cause radio interference in residential areas.
Numbering scheme
Figure 1: Numbering scheme for CX2550 M4 / CX2560 M4 / CX2570 M4
The numbers are referred to on the front of the server enclosure to identify the
corresponding operating panels (see section "Front overview with CX2550 M4
server nodes" on page 53).
Russia (EAC) CU TR 020/2011 (CISPR22)
Japan VCCI Class A / JEITA
Korea KN 32 / KN 35
CE marking to EU
directives
Low Voltage Directive 2006/95/EC
Electromagnetic compatibility 2004/108/EC
RoHS Compliance EU EN 50581
RoHS Compliance Taiwan CNS 15336
CX2550 CX2560/CX2570
Slot 3 Slot 1
Slot 4 Slot 2PSU2
PSU1Slot 3 Slot 1
Slot 4 Slot 2PSU2
PSU1
Slot 3 Slot 1
PSU2
PSU1
Slot 3 Slot 1
Slot 2PSU2
PSU1
Slot 3 Slot 1
Slot 4PSU2
PSU1

CX400 M4 Operating Manual 19
3 Installation steps, overview
This chapter contains an overview of the steps necessary to install your server
enclosure. Links take you to sections where you can find more detailed
information about the respective steps:
ÊFirst of all, carefully read the safety instructions in Chapter "Important
information" on page 21.
ÊTransport the server enclosure to the place where you want to set it up.
ÊUnpack the system, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section "Unpacking the server enclosure" on page 36).
ÊMake sure that you have all necessary manuals (see section
"Documentation overview" on page 8); print out the PDF files if required.
ÊComponents that have been ordered additionally may be delivered loose
with the server enclosure. For mounting refer to the original component
documentation.
ÊMount the server enclosure into the rack (see section "Installing/removing
the server enclosure in/from the rack" on page 37).
ÊWire the server enclosure. Follow the instructions in section "Notes on
connecting/disconnecting cables" on page 51.
ÊConnect the server enclosure to the mains (see section "Connecting the
server enclosure to the mains" on page 50).
ÊFamiliarize yourself with the controls and indicators on the front and rear of
the server enclosure (see section "Controls and indicators" on page 57).

20 Operating Manual CX400 M4
Installation steps, overview
ÊConfigure the server enclosure and install the desired operating system and
applications. The following options are available:
– Remote installation with the ServerView Installation Manager:
With the ServerView Suite DVD provided, you can configure the server
enclosure and install the operating system in a convenient manner.
Details on how to operate the ServerView Installation Manager, as well
as some additional information, are included in the "ServerView Suite
Installation Manager" user’s guide (on the Fujitsu manuals server under
x86 Servers - Software - ServerView Suite - Server Installation and
Deployment).
Configuration information can also be found in the Operating Manual of
the installed server node.
– Local configuration and installation with or without the ServerView
Installation Manager (for further details see Operating Manual of the
installed server node).
IYou will find more information on installing the server enclosure
remotely or locally in the "ServerView Suite Installation Manager"
user’s guide (on the Fujitsu manuals server under x86 Servers -
Software - ServerView Suite - Server Installation and Deployment).