Fujitsu PRIMERGY CX122 S1 Owner's manual

Service Supplement - English
PRIMERGY CX122 S1 Server
Service Supplement
November 2010

Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
email: [email protected].
Certified documentation
according to DIN EN ISO 9001:2000
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2000.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
Copyright © 2010 Fujitsu Technology Solutions GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
– The contents of this manual may be revised without prior notice.
– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from
the use of any information in this manual.
– No part of this manual may be reproduced in any form without the prior written permission
of Fujitsu.
Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of
Microsoft Corporation in the USA and other countries.
Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries
in the USA and other countries.

PRIMERGY CX122 S1 Service Supplement
Before reading this manual
For your safety
This manual contains important information for safely and correctly using this
product.
Carefully read the manual before using this product. Pay particular attention to
the accompanying manual "Safety notes and other important information" and
ensure these safety notes are understood before using the product.
Keep this manual and the manual "Safety notes and other important
information" in a safe place for easy reference while using this product.
Radio interference
This product is a "Class A" ITE (Information Technology Equipment). In a
domestic environment this product may cause radio interference, in which case
the user may be required to take appropriate measures. VCCI-A
Aluminum electrolytic capacitors
The aluminum electrolytic capacitors used in the product's printed circuit board
assemblies and in the mouse and keyboard are limited-life components. Use of
these components beyond their operating life may result in electrolyte leakage
or depletion, potentially causing emission of foul odor or smoke.
As a guideline, in a normal office environment (25°C) operating life is not
expected to be reached within the maintenance support period (5 years).
However, operating life may be reached more quickly if, for example, the product
is used in a hot environment. The customer shall bear the cost of replacing
replaceable components which have exceeded their operating life. Note that
these are only guidelines, and do not constitute a guarantee of trouble-free
operation during the maintenance support period.
High safety use
This product has been designed and manufactured for general uses such as
general office use, personal use, domestic use and normal industrial use. It has
not been designed or manufactured for uses which demand an extremely high
level of safety and carry a direct and serious risk to life or body if such safety
cannot be ensured.

Service Supplement PRIMERGY CX122 S1
These uses include control of nuclear reactions in nuclear power plants,
automatic airplane flight control, air traffic control, traffic control in mass
transport systems, medical devices for life support, and missile guidance control
in weapons systems (hereafter, "high safety use"). Customers should not use
this product for high safety use unless measures are in place for ensuring the
level of safety demanded of such use. Please consult the sales staff of Fujitsu if
intending to use this product for high safety use.
Measures against momentary voltage drop
This product may be affected by a momentary voltage drop in the power supply
caused by lightning. To prevent a momentary voltage drop, use of an AC
uninterruptible power supply is recommended.
(This notice follows the guidelines of Voltage Dip Immunity of Personal
Computer issued by JEITA, the Japan Electronics and Information Technology
Industries Association.)
Technology controlled by the Foreign Exchange and Foreign Trade
Control Law of Japan
Documents produced by FUJITSU may contain technology controlled by the
Foreign Exchange and Foreign Trade Control Law of Japan. Documents which
contain such technology should not be exported from Japan or transferred to
non-residents of Japan without first obtaining authorization in accordance with
the above law.
Harmonic Current Standards
This product conforms to harmonic current standard JIS C 61000-3-2.
Only for the Japanese market:
About SATA hard disk drives
The SATA version of this server supports hard disk drives with SATA / BC-SATA
storage interfaces. Please note that the usage and operation conditions differ
depending on the type of hard disk drive used.
Please refer to the following internet address for further information on the
usage and operation conditions of each available type of hard disk drive:
http://primeserver.fujitsu.com/primergy/harddisk/

PRIMERGY CX122 S1 Service Supplement
Contents
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Overview of the documentation . . . . . . . . . . . . . . . . . 5
1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . 7
2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 19
4.1 Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.1.1 Removing a PRIMERGY CX122 S1 server from the system unit 19
4.1.2 Installing a PRIMERGY CX122 S1 server in the system unit . . 21
4.1.2.1 Rack installation . . . . . . . . . . . . . . . . . . . . . . . 21
4.1.2.2 Network cabling . . . . . . . . . . . . . . . . . . . . . . . 24
4.1.3 Handling server dummy covers . . . . . . . . . . . . . . . . . 28
4.1.3.1 Installing a server dummy cover . . . . . . . . . . . . . . . 28
4.1.3.2 Removing a server dummy cover . . . . . . . . . . . . . . 30
4.1.4 Opening and closing the server . . . . . . . . . . . . . . . . . 31
4.1.4.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . 31
4.1.4.2 Closing the server . . . . . . . . . . . . . . . . . . . . . . 33
4.2 Replacing the front panel module . . . . . . . . . . . . . . . 34
4.3 Replacing the hard disk drives . . . . . . . . . . . . . . . . 40
4.4 Expansion cards . . . . . . . . . . . . . . . . . . . . . . . . 48
4.4.1 Replacing expansion cards . . . . . . . . . . . . . . . . . . . 48
4.4.2 Replacing the PCI riser card . . . . . . . . . . . . . . . . . . . 53

Service Supplement PRIMERGY CX122 S1
Contents
4.5 Replacing the processor . . . . . . . . . . . . . . . . . . . . 55
4.5.1 Removing air ducts . . . . . . . . . . . . . . . . . . . . . . . . 56
4.5.2 Removing a heat sink . . . . . . . . . . . . . . . . . . . . . . . 58
4.5.3 Removing a processor . . . . . . . . . . . . . . . . . . . . . . 60
4.5.4 Installing a processor . . . . . . . . . . . . . . . . . . . . . . . 63
4.5.5 Installing a heat sink . . . . . . . . . . . . . . . . . . . . . . . 66
4.5.6 Installing air ducts . . . . . . . . . . . . . . . . . . . . . . . . . 68
4.6 Installing / replacing memory modules . . . . . . . . . . . . 70
4.6.1 Removing a memory module . . . . . . . . . . . . . . . . . . . 73
4.6.2 Installing a memory module . . . . . . . . . . . . . . . . . . . 74
4.6.3 Removing / installing a memory dummy module . . . . . . . . . 76
4.7 Replacing the system board . . . . . . . . . . . . . . . . . . 77
4.8 Replacing the power supply unit . . . . . . . . . . . . . . . . 84
5 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
5.1 Used screws . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
5.2 Board layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
5.2.1 Front panel board . . . . . . . . . . . . . . . . . . . . . . . . . 88
5.2.2 PCI riser card (D2894-A10) . . . . . . . . . . . . . . . . . . . . 89
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

PRIMERGY CX122 S1 Service Supplement 5
1 Introduction
The PRIMERGY CX122 S1 server is an Intel-based server for small and
medium-sized networks. The compact server casing (only one height unit) as
well as its scalability and security features make the PRIMERGY CX122 S1 the
perfect choice for operational areas data centers, Internet- and application-
hosting.
1.1 Overview of the documentation
Concept and target groups
This Service Supplement completes the information given in the Operating
Manual and the Technical Manual of the system board.
The activities described in this manual may only be performed by service
personnel.
Service DVD
Service partners of Fujitsu Technology Solutions GmbH can order a Service
DVD PRIMERGY. On the DVD the following manuals are available in pdf format:
– The "Safety Notes and Regulations"manual
– The Operating Manual for PRIMERGY CX122 S1
– The Technical Manual for the system board D2899
– The Service Supplement PRIMERGY CX122 S1
– The "BIOS Setup"manual

6 Service Supplement PRIMERGY CX122 S1
Overview of the documentation
Information/procedure Manual
Detailed safety notes "Safety notes and other
important information"
manual
Features and technical data of the server Operating Manual
Installation and operation, among other things:
– External ports
– Operation
– Configuration of the server
– Rack mounting
Information about the system board:
– Features of the system board
– Board layout
– Jumper settings
– Replacing the battery
Technical Manual
Extensions and upgrades:
– Extending/replacing the main memory
– Installing expansion boards in the PCI slots
Service Supplement
Operating Manual
Network Cabling
Replacement routines:
– Replacing the front panel module
– Replacing the power supply unit
– Replacing HDDs
– Replacing the riser cards / expansion boards
– Replacing the processor / heat sinks
– Replacing the system board
Service Supplement
Board layouts
BIOS setup Technical Manual
Operating Manual
Table 1: Overview of the documentation CX122 S1

PRIMERGY CX122 S1 Service Supplement 7
Notational conventions
1.2 Notational conventions
The following notational conventions are used in this manual:
Text in italics indicates commands or menu items.
"Quotation marks" indicate names of chapters and terms that are being
emphasized.
Êdescribes activities that must be performed in the order
shown.
VCAUTION! pay particular attention to texts marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system or lead to the loss of data.
Iindicates additional information, notes and tips.